Search Results for "programmer"

An USB programmer for various devices, including PIC, dsPIC, AVR microcontrollers, and various kinds of serial eeproms

As a console terminal, TermFF, with its extensions, connected to a Forth system device can be used as a software development environment.

pFFh is a programming language that allows you to launch applications on embedded systems safely, quickly and comfortably. pFFh runs on the target system, combining operation as a command interpreter and code compiler. We can say that pFFh behaves like an operating system on the board under development. All pFFh needs is a serial or USB-serial channel to communicate, and through it, receive and process console commands, either from a keyboard or from files sent from a desktop computer. At...

...It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. ...

Fl3x Trainer is a memory patcher that is customizable by the user. Therefore, it behaves just as any trainer program that has ever been written on Windows. The difference here is that it's not needed to write a new trainer for every version of every game/program. Instead it uses configuration files. These can easily be made with any text editor and shared over the internet.

EasyFlash is a flash memory cartridge for the Commodore 64 with multiple configurations and banks possible. Since it does not use traditional UV-EPROMs but Flash memory, it is possible to "burn" the cartridge using your C64. No EPROM programmer is needed.

Note: I haven't even looked at this project for years. I was a pretty bad programmer back then, so the code is sloppy. The next version will be better. Similar to a stream cipher, but rather than performing an exclusive OR on the input bytes and cipher, it performs a mixture of 'rolling' (see x86 instruction ROR) and bit NOT operations according to the key.

...Inclued, I2C Read, Write tools, Super I/O Tools, HDD Tools, PCI Scan Tools, NMI Int Hooker, INT 15h hooker, INT 13 Hooker, Keyboard scan code reader, FWH/LPC BIOS ROM programmer/eraser.

Object Oriented Progamming for Assembly Language - Javalin enables the assembly language programmer to define and create portable object packages using the Javalin object oriented programming model.

a firmware for AVR910 programmer. started from ver3.8 (http://www.mikrocontroller-projekte.de/Mikrocontroller/AVR-Prog/AVR-Programmer.html) upgraded for speed and reliability. provided generic masterSPI interface please mail me on AlexRainPE196@hotbox.ru

Programmer for 8051 compatible microcontollers

PicOload is a programmer and a bootloader that allow to program a PIC 16f87X / 16f87XA using a RS232 serial line whithout leaving the chip from his support and without disturbing the rest of the device

The Project represents the graphic interface of programmer for Atmel microcontrollers. Owing to flexible technology of plug-ins, the interface can be easily adapted for microcontrollers of new types. The project is written in Visual C ++ and the assembler

GPICD - The GNU PIC Programmer and In-Circuit Debugger. GPICD is an open-source Programmer and In-Circuit debugger for the Microchip (TM) PIC (TM) family of microcontrollers. It is an ideal complement for the gputils development tool set.

Develop hardware for universal chip programmer, buildable cheaply by hobbyists - 40-pin programmer to cost under Ł100 (vs. Ł300 for commercial version). Use GunFire for software support.

Extensible device programmer - a microcontroller programmer with support for additional digital I/O's, SPI channels and other peripherals. This project will give you the opportunity not only to program a MCU but also to test/calibrate your final design.

A collection of RISC OS tools for the programmer, including Every, Makatic and MakeCHelp.