Search Results for "sourceforge.net/projects/winpython/files/winpython_3.8/3.8.10.0/winpython64-3.8.10.0.7z"

...It may be assembled with LWTOOLS (http://lwtools.projects.l-w.ca) under Linux, or with Windows cross-assemblers such as Chet Simpson's CASM which is included in RainbowIDE. In order to build a disk image, you will also need the Toolshed utility suite. (http://sourceforge.net/projects/toolshed) - Earlier versions of CaChars used the imgtool utility that is a part of MESS, the Multi Emulator Super System.

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). ...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it.

FileSystem is an OPENSOURCE program for advanced disk management with built-in drivers for PATA IDE Hard Disks and DVD/CDROM Drives, USB Mass Storage Drivers. Implemented file systems : FAT32 / ISO9660 / EXT2. It can be compiled for DOS, LINUX, WIN32

mDriver is a utility to migrate binary device driver from Windows to Linux. It takes out the binary instruction and data from Windows driver (*.sys files), and then combine them with some supporting code to build a corresponding Linux driver module.

Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards. The code for this project is frozen. Development continues with the "U-Boot" project (Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).

This collection of projects represents GPL release of HTC products based on Microchip microcontrollers. One can find interesting projects like melody generators, RTOS, software DDS, digital alarm clocks etc. Most projects are very well documented and ful

The Open USB FXS project aims at producing a very low-price USB FXS board. The project contains all necessary files to reproduce the board PCB, the board's firmware and PC software.