Search Results for "sourceforge.net/projects/winpython/files/winpython_3.8/3.8.10.0/winpython64-3.8.10.0.7z"

...It may be assembled with LWTOOLS (http://lwtools.projects.l-w.ca) under Linux, or with Windows cross-assemblers such as Chet Simpson's CASM which is included in RainbowIDE. In order to build a disk image, you will also need the Toolshed utility suite. (http://sourceforge.net/projects/toolshed) - Earlier versions of CaChars used the imgtool utility that is a part of MESS, the Multi Emulator Super System.

TTF-GDOS is a GDOS replacement that uses true type fonts as well as gem fonts. It is small, fast & efficient and can easily be used without a hard drive. It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). ...

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. One of the most important devices for any disk operating system is the mass storage drive. Although ZXMMC device is available on the market for years and it works well with +3e firmware, partitions created on MMC cards could not be accessed from CP/M world. At some point it became so frustrating, I decided to write FID driver for it.

Omega48 is a virtual printer driver for Microsoft Windows which allows you to convert the document to the graphics formats such as EMF, BMP and non formated text file (UNICODE or ANSI). Omega48 allows to save MS Windows Spool (SPL) and Shadow (SHD) files

The Samsung ML-1210 printer works perfect under Win32, under linux (not so good), but not under Win64. This tool is not a complete driver, even presently not a 64-bit, but it allows to print graphic files. It uses code from ghostscript 5.10 for linux.

Embedded PowerPC Bootloader Project, especially for Embedded PowerPC boards. The code for this project is frozen. Development continues with the "U-Boot" project (Universal Boot Loader, see http://sourceforge.net/projects/u-boot ).