Search Results for "kdiff3-64bit-setup_0.9.98-2.exe"

...The LEDs on the case & the mobile application indicate if there is a high/low temp alarm, hi/low humidity alarm, soil moisture alarm, or smoke alarm. A speaker (buzzer) is activated on the case if there is a smoke alarm. 2 other LEDs indicate if either the exhaust fan is on or if the humidifier is on.

iWattnick aims to be a top-class computer for e-bikes, e-scooters, e-motorcycles. It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. ...

DazzLed is a set of apps to control rgb-leds from you computer.

A simple pic controller network with remote programming capability

A simple python module to interface with DMX to USB devices

This program is window-sensetive remapper for special buttons found on tx2650er and like tablet notebooks from Hewlett-Packard. Note that it WILL break HP QuickPlay crapware.

Automate the management of Cisco switches out-of-band (OOB) for extra security and reliability. Uses serial ports; version 2 is thread-safe and supports multiple switches.

Python module for the i2c-tiny-usb project available here: http://www.harbaum.org/till/i2c_tiny_usb/index.shtml The module is an alternative for the linux kernel driver. With this module you can directly communicate with an I2C device. Discarded - Use Ti

GUI and scripts for the ACC300 serial check-printer and MySQL checks database management Interface de usuário e scripts para a impressora de cheques ACC300 ("Check-pronto") e para gerenciamento de um banco de dados MySQL de cheques emitidos

libdac2 is a userspace driver for dac-2 USB audio transport controllers which were manufactured by PCDJ.

The goal of the CarOS project is to design and implement the software and hardware systems necessary to provide a mobile computing platform in a vehicle. The CarOS will be Linux based.

pystim is an open source electrical stimulation device driver and development framework. It features a parallel/sequential block paradigm and supports event-base programming. It also provides a device simulator.

Pure Python I2C protocol interface over pySerial, pyParallel, ...

Driver support for 3D Controller Hardware. We hope to support SDL Input, DirectInput, and other major controller API's including game consoles and embedded systems.

The Wolfram Machine project is an effort to create a set of documentation and useful modules (both hardware and software) for a computing architecture based on the mathematical theories presented in Steven Wolfram's book _A_New_Kind_of_Science_.

Development area for GNU/Linux 2.6.x for the KS8695 ARM SoC. Covers kernel patches, drivers for serial, Ethernet, PCI, GPIO, watchdog subsystems, and drivers for optional PCI based devices such as USB, WiFi, WiMAX, IPSec, SSL, and RSA devices.

Lightget is an open hardware and open software project to build computer controlled systems with LEDs and/or other light sources. The ultimate goal is to provide illumination and visual entertainment in a convenient, low-cost solution.

weegie is a driver that allows a gamepad with dual joysticks to be used in place of keyboard and mouse for input under X11.

vport is a universal hardware interface for education and development. It supports all important microcontroller intefaces such as I2C, SPI, JTAG, RS232, IO-Ports, 1-Wire, CAN, ...