Search Results for "esp32"
Sort By:
Showing 10 open source projects for "esp32"
View related business solutions-
The Most Powerful Software Platform for EHSQ and ESG ManagementChoose from a complete set of software solutions across EHSQ that address all aspects of top performing Environmental, Health and Safety, and Quality management programs.
-
AestheticsPro Medical Spa SoftwareAestheticsPro is the most complete Aesthetics Software on the market today. HIPAA Cloud Compliant with electronic charting, integrated POS, targeted marketing and results driven reporting; AestheticsPro delivers the tools you need to manage your medical spa business. It is our mission To Provide an All-in-One Cutting Edge Software to the Aesthetics Industry.
-
1
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. -
2
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. ... -
3
NeoPixelBus
An Arduino NeoPixel support library
...A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most Arduino platforms. ESP32 support for using both RMT and i2s. RMT timing currently is sensitive to high interrupt frequency due to issues in the Core. There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. ... -
4
DASH V4
Blazing fast library to create a functional dashboard on ESP8266
DASH V4 is the 4th-gen blazing fast library to create a functional & real-time dashboard for ESP8266 & ESP32 microcontrollers. This library includes charts, display cards, interactive buttons and many more components to create a perfect dashboard that is accessible locally via your IoT device's IP. DASH does not require any kind of internet connection, everything is stored locally. -
Intelligent Automation Solutions Built for Modern Finance TeamsDigitally transform your business with workflow automation and integrated payment solutions. Digitally store and secure your data with advanced search and accessibility features that keeps your documents at the tip of your team’s fingers.
-
5
LVGL
Powerful and easy-to-use embedded GUI library with many widgets
Powerful and easy-to-use embedded GUI library with many widgets, advanced visual effects (opacity, antialiasing, animations), and low memory requirements (16K RAM, 64K Flash). LVGL provides everything you need to create an embedded GUI with easy-to-use graphical elements, beautiful visual effects, and a low memory footprint. LVGL is an open-source graphics library providing everything you need to create an embedded GUI with easy-to-use graphical elements, beautiful visual effects, and a low... -
6
WS2812FX
WS2812 FX library for Arduino and ESP8266
This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each... -
7
ESP8266Audio
Arduino library to play MOD, WAV, FLAC, MIDI, RTTTL, MP3
Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. ... -
8
TinyGSM
A small Arduino library for GSM modules, that just works
A small Arduino library for GSM modules that just works. This library is easy to integrate with lots of sketches that use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client, and File Download examples are provided. Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario. TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM. Now, you have more space for your experiments. TCP (HTTP, MQTT,... -
9
Blynk C++ Library
Blynk library for embedded hardware
Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG experience, no coding on iOS or Android required. Hardware can connect to Blynk Cloud (open-source server) over the Internet using hardware connectivity available on your board (like ESP32), or with the use of various shields (Ethernet, WiFi, GSM, LTE, etc). ... -
IT Asset Management (ITAM) SoftwareDrowning in misplaced IT assets, compliance headaches, and shadow IT? Navigate to clarity with an intuitive IT Asset Management solution. Experience crisp visibility, effortless control, and unshakable security – all while freeing up your budget with optimized software licenses. The best part? It’s easy.
-
10
ESP32 BLE Keyboard library
Bluetooth LE Keyboard library for the ESP32
...(Max length is 15 characters, anything beyond that will be truncated.) By default the battery level will be set to 100%, the device name will be ESP32 Bluetooth Keyboard and the manufacturer will be Espressif. This feature is meant to compensate for some applications and devices that can't handle fast input and will skip letters if too many keys are sent in a small time frame.
- Previous
- You're on page 1
- Next
