Search Results for "python script 2.1.0"

Python script that reads human-readable (txt) new-line separated hostname - ip address pairs and translates it to bind (dns server) configuration files.

...The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3, GNS3, Linux.

Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via Telnet. The script reads the IPs of the devices from the NETWORK_IP file and sends the commands you enter in the CMD_FILE file to all the devices. Telnet username/password parameters are configured within the script.

OSPF_SNMP_v1.0.py is an OSPF network discovery script. It allows the discovery of all OSPF network devices in the network, without connecting to each of them or knowing all their IP addresses. The user must provide the IP and SNMP community string of a single OSPF device in the network (for example, a device in the core) and the script searches for all other OSPF routers. Prior to running the script, the user should configure SNMPv2 community string on the device and also include the subnet between his PC and the router into the OSPF process, so he has IP connectivity to all other OSPF nodes. ...

...Tools used for coding and testing: Python 2.7.3, MySQL Server 5.5.37, GNS3, Linux. Tested on Cisco 1710, 2621, 2691, 3660, 3725, 7206

A python script used to generate all possible password combinations for cracking WAP and other logins or password files. This program is open source. If you see the need to repair or change something by all means do so, but share your findings. *HONK* Usage: wordpie.py [-h] [-o OUTPUT] [-min MIN_SIZE] [-max MAX_SIZE] [-N] [-L] [-U] [-S] [-A] [-v] Generate a wordlist with all possible combinations of letters including: -L (Lowercase Letters) -U (Uppercase Letters) -N (Numbers) -S (Special Characters) -A (All Characters, Numbers, and Letters) -min (Minimum Size) -max (Maximum Size) -o outputfile.gz or -o stdout By default -o filename.gz to create a GZ compressed text file of all the words. ...

Aures is a Python script that scans hosts using Nmap periodically and notifies the user of changes through libnotify.

Efficent WEB UI for wget utility written in python(twisted) . It's work without any web server. Script consists of a SINGLE file

Python script that plots access points from Inssider GPX wardrive capture to an html file displaying a Google map. Useful if you care about WPA and WPA2 data instead of just plain old WEP...

A CLI for managing Nagios config files. It allows for creation, deletion and modification of object definitions within a set of config files, while preserving original file comments and layout. Quickly script your own wizard or web interfaces.

name-cgi is a python script, that allows programs using http to get iors from omniNames. It has a loadbalancing feature, this lets you put an orb on a number of boxes and the script will return the ior randomly.If an orb is dead, name-cgi should remove

A script written in Python, which resolves a list of hostnames using Samba\\\'s nmblookup and adds them to the hosts file for use in linux.

sps (Socket ProcesS) is a Python script which shows which processes are using which TCP port numbers, or which process is using a particular TCP port. It runs on Linux 2.2 and 2.4.

jennifer is an educational (albiet oddly named) firewall/NAT script generator, written in python, targetted at linux+iptables systems. It is intended to both (a) generate practical and useful configurations, and (b) demonstrate the concepts involved in TO