Open Source Python Networking Software - Page 8

Nagios plugin to check MRTG traffic

Chestnut Dialer is PPP dialing program, written in Python. Chestnut Dialer may work with GTK+, Qt, and without GUI (command line interface).

Basic GUI, CLI tool programmed in Python 3.4 and QT5. It gives you the ability to detect, scan and send some useful HTTP requests "Commands" to endless amount of chromecast devices. As well as the ability to loop the commands so the process of repeating it will be automated with a set duration in-which the looping will be done.

Provides a toolkit for the network engineer who is stuck in the ridiculous situation of only being given terminal server access to their network, and not allowed any devices inside the network.

Cislog is a syslog server that specifically targets Cisco devices and their implementation of the syslog protocol. It consists of a Django web interface and a syslog listener with a database between them.

Allo stato attuale Internet non sara totalmente libera fintantochč non saranno completamente libere ed accessibili le strutture fisiche che lo trasportano.CityLAN vuole essere il manifesto di questa libertŕ...

This project allow to test network availability on multiple nodes. It is built as a plugin architecture in order to use it on multiples networks. Test is based on three steps : module status, local visibility of network, and interconnection between nodes

Setup files are quite old.

ConVirt is an intuitive, graphical management tool providing comprehensive life cycle management for Virtual Machines.

Configurize is a configuration management application for Linux-based systems.

CoyoteMonitoring is a Zope-based web interface for managing NetFlow Collectors, data, and graphs. Inspired by Cacti's capabilities with SNMP, CoyoteMonitoring aims to provide rich and useful features for organizations requiring NetFlow management.

DJ Py is a jukebox daemon, who lets you rate your songs and crossfades between them. If you dont want to constantly supervise your xmms, this is the solution

DNS Metasync helps DNS administrators to deploy a DNS cluster where slaves servers' zones are kept in sync with the master: adding or deleting a zone in the master reflects the change on the whole umbrella in an automated fashion

A daemon that creates realtime dynamic, expirable iptables rules to block/drop IP addresses attempting brute-force breakin attacks on a linux host via ssh or other mechanism. Highly customizable and extensible.

Introduction to Deep Neural Networks with Keras and Tensorflow. To date tensorflow comes in two different packages, namely tensorflow and tensorflow-gpu, whether you want to install the framework with CPU-only or GPU support, respectively. NVIDIA Drivers and CuDNN must be installed and configured before hand. Please refer to the official Tensorflow documentation for further details. Since version 0.9 Theano introduced the libgpuarray in the stable release (it was previously only available in the development version). The goal of libgpuarray is (from the documentation) make a common GPU ndarray (n dimensions array) that can be reused by all projects that is as future proof as possible, while keeping it easy to use for simple need/quick test. The easiest way to get (most) these is to use an all-in-one installer such as Anaconda from Continuum. These are available for multiple architectures.

DeepDive Sentinel (DDS) is a Windows diagnostic application focused on real-world network performance — not just raw speed. It helps you identify issues that affect gaming, streaming, calls, and remote work by highlighting latency spikes, jitter, and packet loss in a clear monitoring + diagnostics workflow. This is an early-access BETA. Development will continue and features may change. Diagnostics are intended to run locally, and DDS is designed to provide actionable “next step” recommendations based on results. Download: The latest installer is available in the project “Files” section. Feedback: Use the project tracker or contact: deepdivesentinel@outlook.com License: Freeware (binary distribution). See the included LICENSE file in this project.

This software is written in python and aim to add export function to OCS Inventory NG for a formatted xml with custom stylesheet in a pdf or html. DAC can export a single computer or all the computers. Web version and Cli version

DPytHOS is a means for administrators of large networks to both monitor and manage the servers under their control. DPytHOS is implemented in python and uses a generic database back-end (with MySQL supported and MS-SQL 2000 supported via XML)

DogoIDS is an open-source active-probing-based network intrusion detection system (AP-NIDS) for wireless multihop networks (MANETs, Wireless Mesh Networks, Sensor Networks, etc). At this stage, DogoIDS only support the IEEE 802.11s standard for Wireless Mesh Networks. DogoIDS is now under construction in a very early stage and mainly for research purposes. However, we aim to release a stable version ready for production soon. *** IMPORTANT *** We uploaded the very first experimental implementation of DogoIDS (still alpha), so expect to find bugs. The Documentation is sadly not yet fully done. So far, we did experiments using a IEEE 802.11s network (open80211s kernel 3.10.0-rc4-wl). We are happy to receive comments.

An extensible network forensic analysis framework. Enables rapid development of plugins to support the dissection of network packet captures. This is a major framework update to Dshell. Plugins written for the previous version are not compatible with this version, and vice versa. By extension, dpkt and pypcap have been replaced with Python3-friendly pypacker and pcapy (respectively). Enables development of external plugin packs, allowing the sharing and installation of new, externally-developed plugins without overlapping the core Dshell libraries. Plugins can now use all output modules, available to the command line switch, -O. That does not mean every output module will be useful to every plugin (e.g. using netflow output for a plugin that looks at individual packets), but they are available.

This is a program built on top of Python, Scapy, and Scapy EIGRP to aid in auditing the security of EIGRP implementations. Read the white-paper at https://docs.google.com/document/d/1ZVNwi5KRkbY_PxMoODTvwSh3qpzdqiRM9Q4qppP2DvE/edit?pli=1

EPLB is DeepSeek’s open implementation of a load balancing algorithm designed for expert parallelism (EP) settings in MoE architectures. In EP, different “experts” are mapped to different GPUs or nodes, so load imbalance becomes a performance bottleneck if certain experts are invoked much more often. EPLB solves this by duplicating heavily used experts (redundancy) and then placing those duplicates across GPUs to even out computational load. It uses policies like hierarchical load balancing (grouped experts placed at node and then GPU level) and global load balancing depending on configuration. The logic is implemented in eplb.py and supports predicting placements given estimated expert usage weights. EPLB aims to reduce hot-spotting and ensure more uniform usage of compute resources in large MoE deployments.

This library makes SRV records in DNS simple to use; actually, due to the fallback for classical connection mechanisms, it makes building a network connection in general extremely simple.

A simple utility that allows desktop users to access a small and configurable set of samba shared folders.

An Electronic Shelf Label is a device that's typically attached to the front edge of retail shelving. ESL Firebase Edition V2.0 utilizes the AES-256 in CBC mode and Google Firebase. It doesn't require an expensive gateway to function, once configured, all it needs is a power supply and a Wi-Fi access point. ESL Firebase Edition V2.0 allows you to operate as many of them as you wish, provided that each has its own unique ID, and there's enough power and bandwidth for all of them. For more information please visit https://github.com/Northstrix/Electronic-Shelf-Label-Firebase-Edition You can find the tutorial on V2.0: https://www.instructables.com/DIY-IoT-Electronic-Shelf-Label-With-Google-Firebas-1/ V1.0: https://www.instructables.com/DIY-IoT-Electronic-Shelf-Label-With-Google-Firebas/ The desktop app is made with the help of the ChatGPT.