Search Results for "python user interface"
Sort By:
Showing 21 open source projects for "python user interface"
View related business solutions-
The full-stack observability platform that protects your dataLayer, tags and conversion dataCode-Cube.io detects issues instantly, alerts you in real time and helps you resolve them fast. No manual QA. No unreliable data. Just data you can trust and act on.
-
Premier Construction SoftwareRated #1 Construction Accounting Software by Forbes Advisor in 2022 & 2023. Our modern SAAS solution is designed to meet the needs of General Contractors, Developers/Owners, Homebuilders & Specialty Contractors.
-
1
Open Source Routing Machine
Open Source Routing Machine - C++ backend
High-performance routing engine written in C++14 designed to run on OpenStreetMap data. There are several services available via HTTP API, C++ library interface and NodeJs wrapper. Nearest, snaps coordinates to the street network and returns the nearest matches. Route finds the fastest route between coordinates. Table computes the duration or distances of the fastest route between all pairs of supplied coordinates. Match snaps noisy GPS traces to the road network in the most plausible way.... -
2
FlowViewer
FlowViewer is a web-based netflow data analysis tool.
FlowViewer provides a convenient web-based user interface to Mark Fullmer’s flow-tools suite and CMU's netflow data capture/analyzer, SiLK. The inclusion of the underlying SiLK tool set enables FlowViewer users to continue to use the tool with the newer IPFIX netflow data protocol, which includes support for IPv6 and Cisco's v9 and FNF netflow. FlowViewer has been developed for NASA’s Earth Sciences Data and Information System (ESDIS) networks, and credit goes to NASA for their usual outstanding support of innovation. ... -
3
openWrt-snort
Image of OpenWrt OS, with snort community featured in.
Image of OpenWrt OS, with snort community featured in, for Raspberry Pi 4/ 4B+ and 400, basically for Processor BCM2711. Installed Snort Community Model to Intrusion Detection system. Prevention system not installed. eth0 used as output/ LAN socket, to run internet and access router. eth1, which can be USB -> Ethernet port, is used as WAN port, to connect Pi board to Internet IP. to flash img file, you can restore in SD card, or use Balena Etcher to flash. or you can use DD... -
4
Advanced DHCP Server Live CD (With GUI)
The Free & Popular opendhcp application for Physical & Virtual Machine
Instructions: 1. Write this .iso file to a Pen Drive, with the Free multibootusb software ( links below ) 2. Boot from the Pen Drive, after changing the BIOS Boot Order quickly on system startup 3. First startup will show some info dialogs. These can be cancelled without making any changes 4. Click on the opendhcp folder link on Desktop 5. Right click the set_eth0_static_ipaddress.sh file and choose Open as Text option. Edit the file to meet your network needs. To know about... -
SoftCo: Enterprise Invoice and P2P Automation SoftwareSoftCo Accounts Payable Automation processes all PO and non-PO supplier invoices electronically from capture and matching through to invoice approval and query management. SoftCoAP delivers unparalleled touchless automation by embedding AI across matching, coding, routing, and exception handling to minimize the number of supplier invoices requiring manual intervention. The result is 89% processing savings, supported by a context-aware AI Assistant that helps users understand exceptions, answer questions, and take the right action faster.
-
5
mis-connector
Connector for misconfigured hosts on LAN.
This tool act as ad-hoc NATP and user-space router for all connections comming from selected interface (and outside address range served by HDCP - for example) to the rest of world. If you have device with static IP and there is no way to change it this may be solution to connect it to any other LAN. -
6
KeexyBox
The box to keep the Internet under your control
KeexyBox allows you to do parental control, block ads, limit telemetry, and browse the Internet anonymously from your home network without installing any software on your devices. It also can be used to create a public wireless access point with the captive portal. It is a software program which requires a Raspberry PI box and which is installed on Raspbian. It constitutes a cut-off point between your devices (computers, tablets, smartphones, etc.) and your router or Internet box.... -
7
Network Simulator (fork CORE - Live USB)
Live DVD with CORE network simulator
The Common Open Research Emulator (CORE) is a tool for emulating networks on one or more machines. You can connect these emulated networks to live networks. CORE consists of a GUI for drawing topologies of lightweight virtual machines, and Python modules for scripting network emulation. -
8
ForceBindIP GUI
ForceBindIP GUI by LibTiff , the first graphical user interface that w
ForceBindIP GUI by LibTiff , the first graphical user interface that was created in 2013. Latest version (2.0) is refreshed , more user friendly , with new graphical user interface for the ForceBindIP engine. Features full functionality such as Delay function , profiling and shortcuts of the most useful net commands. Proven and tested to work with all x86 & x64 systems. -
9
Gerix Wifi Cracker
Gerix WiFi cracker
Gerix WiFi cracker is a Backtrack program to crack WiFi. The main advantage of this program is that it has a graphical user interface. So that even newbies can easily hack a WiFi without the need of any command line knowledge. -
Next-Gen Encryption for Post-Quantum Security | CLEAR by Quantum KnightCLEAR by Quantum Knight is a FIPS-140-3 validated encryption SDK engineered for enterprises requiring top-tier security. Offering robust post-quantum cryptography, CLEAR secures files, streaming media, databases, and networks with ease across over 30 modern platforms. Its compact design, smaller than a single smartphone image, ensures maximum efficiency and low energy consumption.
-
10
vtrunkd
Network link bonding/trunking/aggregation and multichannel VPN daemon
vtrunkd - network link bonding and multichannel VPN. Vtrunkd is a Linux VPN daemon used to combine several connection paths into one aggregated channel. Features latency, reordering and jitter management, behaviour analysis optimizations for encapsulated protocols, bufferbloat control, packet redundancy, and multiple cpu cores utilization. Up to 30 heterogenous links bonding supported. Used for live streaming, LTE/3G/Wi-Fi link bonding. 32/64-bit, x86, MIPS and ARM supported. Supports python... -
11
netcfgtoolssh
Python script for pushing the same configuration on multiple devices.
Python script for pushing the same configuration (stored in a predefined file) on multiple devices at the same time via SSHv2. The script reads the IPs of the devices from the NETWORK_IP file, then gets the SSHv2/Telnet credentials from the SSH_USERPASS file and sends the commands you enter in the CMD_FILE file to all the devices. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3,... -
12
netcfgtooltelnet
Python script for pushing the same configuration on multiple devices.
...This feature can be further customized to prompt the user for them or read them from a file. The script also checks if all the needed files exist, if all the IP addresses are valid and if all the devices are reachable. Tools used: Python 2.7.3, GNS3, Linux. -
13
ospfdiscoverysnmp
OSPF network discovery script via SNMP.
...After providing necessary info and the OSPF info is gathered, the user has three choices: display the OSPF routers info on the screen, export the data to a file for Excel importing and generate the OSPF topology showing neighborships, router IDs and neighbor IPs. Tools used for coding and testing: Python 2.7.3, PySNMP, GNS3, Linux. Tested on Cisco 2621, 2691, 3660. -
14
netmonsql
Network performance monitoring and logging script for Cisco devices.
NetMon_Cisco_to_SQL.py is a basic network performance monitoring and logging script for Cisco devices. It gathers parameters (CPU Utilization, Used Processor Memory, Used IO Memory, UP Ethernet Interfaces density, in percent velues) from Cisco routers by parsing command outputs and exports them to a MySQL database. NetMon_Query.py is a query script for the MySQL database in the form of an interactive menu for generating statistics. Tools used for coding and testing: Python 2.7.3,... -
15
Myra Canyon
network control and reporting
Easily turn a Ubuntu-based computer into a full linux router, complete with dhcpd, named/bind, iptables firewall, and packet inspection of the network traffic being routed. Deep packet inspection for layer 2 (mac), layer 3 (ipv4, ipv6), layer 4 (icmp, tcp, udp), and layer 7 (application-specific). Summary of network flows and all layers of inspected traffic is stored in a database at 1-second intervals. This database is then mined to drive the Apache/PHP web interface. -
16
pyforward
Turn your linux machine into an infrastructure wifi router.
pyforward is a GTK+ front-end to three core linux technologies that make it possible to turn your computer into a wifi access point in infrastructure mode: 1. iptables - To enable routing of your requests. 2. dnsmasq - To assign ip-addresses using dhcp. 3. hostapd - To enable wifi access to your machine in infrastructure mode. Refer the wiki page for more information on how to run pyforward. Note: Presently I'm in "development" mode. So, I urge the users of pyforward to make any... -
17
BGP Looking-glass
Open Source BGP Looking-glass
BigPlg allows the collection of the IPv4 Internet routing table which may be viewed by service providers and/or ISP customers to validate IP routing across autonomous systems. Routing updates may also have attributes aliased to become (graph) readable. This function exists to allow the exporting of RIB updates to Splunk, or any such data collector. A beneficial side-effect of collecting BGP routing information is the ability to track BGP updates/events local or remote(upstream). To analyze... -
18
steganoroute
Send steganographed text messages to mtr with fake hops in the network
Steganoroute is a tool to send steganographed text messages to another computer over the network. The receiver must make a traceroute to the sender using the mtr program (and pressing 'd' once to switch the display mode to the continuous graph). This tool, the sender, creates several fake hops and makes them answer the ICMP packets (or not) to write the letters one by one on the mtr client screen. -
19
vsResolver
DNS Validating Stub Resolver
The Validating Stub Resolver (vsResolver) is a DNS stub resolver that implements the Domain Name System Security Extensions (DNSSEC) specified in RFC 4033, RFC 4034 and RFC 4035. These add data origin authentication and data integrity to the Domain Name System. vsResolver extends the dnspython toolkit (http://www.dnspython.org/) and uses the pycrypto library for its underlying crypto implementation(https://www.dlitz.net/software/pycrypto/). Click on this link for a ridiculously simple... -
20
Proxy Tester is a proxy list tester and then it generates a wpad.dat file you can use for your browser based on working servers. wpad.dat file selects a random proxy server from the list of provided working proxy servers with each connection request.
-
21
J-X-Way UNI-TE
Java library for X-Way and/or UNI-TE communication.
PROJECT HAS MOVED HERE: https://github.com/Elektordi/x-way-uni-te X-Way and UNI-TE (also used in Unitelway) are communication protocols for old Schneider Electrics PLCs (Programmable Logic Controllers), formerly "Modicon Télémécanique". The aim of this open-source project is to create a Java library to send and receive such data, because there is actually no open-source project at all in this field. Keep in mind that those protocols are old and not maintained anymore by any company,...
- Previous
- You're on page 1
- Next
