Open Source Linux Serial Software - Page 5

Shooting Chrony Data Downloader, a program that allows downloading of data acquired by the device

A dialect-neutral Smalltalk library which supports communication with NMEA enabled devices, such as GPS receivers. The initial specific target device will be a Magellan GPS315 receiver.

HW(VHDL) and SW of logic analyzer and On-Chip-Verification(OCV) for Value Change Dump(VCD) file format that exported to seemd SystemC ,ModelSIM, and many other EDA tools. Very easy and Simple.

TJTerm is an open source serial port terminal program written in Java, running on Linux, Mac OS and Windows. It supports color, logging, macros, graphical hex and/or ASCII input and output and more.

Room temperature monitoring system.

This library, then DLL, designed for use with weighing terminal CI-5010A on the RS-422/485 or RS-232 via a physical or virtual COM port over USB in OS NT/2000/2003/XP/Vista/7/8 and reads and decodes the data of the operation, gross weight, net weight, unit number, value and sign weight, units and features indicators. Restoring communications using virtual serial port automatically. ORDER use and limitations: 1. You can optionally set the COM port in the procedure 'reinit()' with constantly raised the flag of activation in the library is being processed. 2. Parameter gl_count procedure 'getdata' indicates the number of received packets of COM-port. 3. Implemented AutoTrack pulling converter RS-485/USB (via SetupAPI) and reconnect to the specified port initialization.

The Clans was a popular game written for online BBSes back in the day of their great popularity. It is a text-based game featuring inter-BBS communications. It was written initially for Turbo C++, but has been ported to gcc and MSVC

Simple and dumb tool to access serial ports. Mainly intended for use to access serial consoles of various hardware.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt

USPUI-Universal Serial Port User Interface WxWidgets based grfic user interface for serial port. You can define the interface by simple configuration file.

Mainly designed for embedded & software engineers, UartVide is a flat-UI and straightforward and lightweight RS232 serial port communication utility that allows you to configure the connection parameters and communicate via the port. UartVide runs on all platforms supported by PySide2 including Windows, Linux. (MyTerm was renamed to UartVide from version 2.4)

RS232 Terminal Program

Firmware for a VT-2xx Terminal Clone

XMdaemon is a set of daemons to control, play, and timeshift a show from a XMPCR on a linux system. It consists of a xmdaemon, xmtimeshiftdaemon, xmcontroldaemon, and a Freevo plugin. All updates available at http://www.freevohelp.com/xmdaemon

A cross platform GUI configuration tool for Ciseco XRF radio devices accessed over serial or USB. This product is produced independently from Ciseco, and carries no guarantee from Ciseco about quality, suitability or anything else. The supplier of this product assumes all responsibility for it.

Simple terminal program based on pySerial for raw binary / ascii communication with microcontrollers and such. Features local echo and automatic modulo-256 checksum and CR/LF postfix.

catty is a small utility to write+read to+from a serial tty device. You can use it in scripts, or directly writing some text to its stdin. With catty you can add in a few seconds serial communication to your shell scripts.

cyclades-serial-client is an RFC 2217 compliant client that works with servers such as Cyclades Terminal Servers and sercd. It creates a virtual serial port which connects to the server over a network.

A project to embed Lua on different hardware platforms. Currently ARM variants are targeted, but it should be possible to port it to any platform that is supported by the gcc+newlib combo. Platform access libraries will also be provided.

This software, consisting of a daemon and a command shell, is meant to be used together with the Xtreme GM7 GPS tracker to help simplify its management and to make it possible to monitor alerts sent by the tracker. The software is intended to be run as a GNU/Linux service that always runs in the background and can be used to both receive location updates from a remote tracker as well as configuring the tracker (over both USB and a GPRS link to the device). All received events are stored in a database and the daemon supports export of events to GPX, KML, CSV format. It is also possible to have specific action scripts executed upon receiving specific events or generate mail notifications. The daemon and command shell comes with extensive reference documentation (HTML & PDF) and Unix man pages.

Telnet to serial gateway for embedded development

jpnevulator - just another serial sniffer

This project aims a proving an Hardware as a VSCP node (M2M) to store information remotely on the CAN network.

libserial This library provides a C++ multithreading encapsulation for serial port ioctls. Also, it provides buffering mechanisms in order to support active rs232 devices

This program builds up a Modem server, which supports Hiroyoshi Kurohara's NPCOMM-Suite.