Search Results for "avr atmega microcontroller"

amforth is an extendable command interpreter running on AVR ATmega and TI MSP430 microcontrollers. The Risc-V and ARM architectures are ascending. Turnkey actions for IoT workloads are possible as well. The command language is close to the Forth 2012 standard.

AVR ATmega port of freeRTOS A port of freeRTOS which can be flexibly flexibly configured use almost any available Timer on AVR ATmega devices and will operate with almost any classic Arduino device from Arduino, SeeedStudio, Sparkfun, Freetronics or Pololu. Going forward this repository will be updated less often and only with major releases.

...It is adapted and extended from code written by Guido Socher and Pascal Stang. High-level routines are provided to allow a variety of purposes including simple data transfer through to HTTP handling. Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. ...

Super lightweight task scheduler aimed at 8 bit AVR ATmega micro-controllers (perfect for Arduino), although it can easily be used on other hardware like Microchip PIC. It uses simple round-robin scheduling so no priority levels can be set. You choose the time interval by calling dispatchTick(), this is usually in a timer interrupt. Range for number of tasks: 0 to 255 tasks Range for delay: 0 to 65535 ticks Each task only uses 5 byte of RAM.

Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI.

This is a RGB LED Pin-back Button controlled by an AVR Microcontroller.

A project collecting free software modules which can be used together in an arbitrary microcontroller application, starting with AVR platforms.

Microcontroller (AVR) based standalone digital light controllers ("dimmers"). The "Diamond" series supports 20 channels (TRIAC, FET, 0-10V, relay) with automatic fading, 20 scenes, 21 timers, IR remote, LCD, DMX-512 interface, global standby & more.

This project is about using a SD-card together with an ATMEL ATmega32 microcontroller as mass storage medium. It implements the interface to the SD-card, a simplified FAT16 filesystem and a sample application: a data logger.

This code programmed into an AVR microcontroller wired to the receiver's JTAG port allows loading unsigned code on SMP8634 based media receivers enabling you to boot other operating systems e.g. Linux. (Only x30Xt receivers are currently supported)

Dukra is programing language for AVR Microcontroller Atmega8-16.

SDL REFLEX is the micro kernel of a real time operating system for the AVR microcontroller family. The kernel is especially designed to implement systems described in SDL – “The Specification and Description Language” . Compiler GNU ANSI-C for AVR v.3.3

avrLab is an IDE (integrated development environment) for AVR microcontroller from ATMEL. It includes an editor with syntax highlighting. avrLab includes support for macro assembler (tavrasm and avra) as well as support for accessing the AVR via uisp.