Search Results for "serial device programmer"

ChibiOS/RT is a free and efficient RTOS designed for deeply embedded applications. It offers a comprehensive set of kernel primitives and supports many architectures: ARM7, Cortex-M0, Cortex-M3, Cortex-M4, PowerPC e200z, STM8, AVR, MSP430, ColdFire, H8S, x86.

A real-time serial port device driver, works with RT-Linux and RTAI.

The Null-modem emulator (com0com) is a kernel-mode virtual serial port driver for Windows. You can create an unlimited number of virtual COM port pairs and use any pair to connect one COM port based application to another. The HUB for communications (hub4com) allows to receive data and signals from one COM or TCP port, modify and send it to a number of other COM or TCP ports and vice versa.

EM-65C02 emulates a Western Design Centre (WDC) 65C02 microprocessor on a Microchip PIC24/33 microcontroller. The code supports varying amounts of RAM and ROM depending on the features of the host device. The emulation speed depends on the device and its oscillator configuration. A PIC24EP running at 70MIPS has emulates a 65C02 running at about 6Mhz. The example code configuration uses a copy of the BBC BASIC ROM image and a simulation of enough of the Acorn MOS to make the BASIC work using a serial UART connection.

Operating System for embeded device based on small µController (Microchip, Atmel, …) This OS enable the device to be connected and controlled by a PC trought RS232 protocol (COM, TTY or USB port) with standard Terminal or Shell integration.

tcp2com creates a bridge between a TCP socket and a serial port (COM). The program runs as a service under Windows NT. With tcp2com, you can telnet into any device you may have plugged into your COM port.