Search Results for "clock"

An open-hardware and -firmware project that implements a USB-input fully-digital class-D audio amplifier. All processing is done on FPGA, including the USB-physical, USB-SIE, HID interface, clock-recovery, bus voltage regulation, noise-shaping and PWM output. A Microchip PIC based remote control is also included. The remote maps to the media buttons of the USB HID interface. The volume control, next track, previous track, stop and play/pause functions are supported.

SmGen is a finite state machine (FSM) generator for Verilog. On the other hand, it is not an FSM entry tool. The input is behavioral Verilog with clock boundaries specifically set by the designer. SmGen unrolls this behavioral code and generates an FSM from it in synthesizable Verilog. Clock boundaries are explicitly provided by the designer so there is good control on the expected timing

The purpose of this simple DIY project is to build an electronic circuit that received the GPS time signal, convert it to the radio-controlled clock format, and transmit that signal to the clock. Once built, there is no need for setup and maintenance, all you need is put this unit close to the window to receive GPS signal, and it will transmit the time signal to your radio-controlled clock.

cccutils provide the sources of the CCC and the CCC-Fanout.

Development of a fully designed alarm clock implemented on the Xilinx Spartan3 board.

Picode is the ultimate VHDL picode 16 to 32 bits controller. It is described in only one entity and is implementable in standard FPGAs. It has it own compiler. Picode is designed to take only one or two clock cycle duration per instruction.