Recent changes to support-requests

Problemas de Instalación Trixbox

Juan Jose Ramirez Aranda — Mon, 27 Feb 2023 15:51:47 -0000

no puedo no puedo realizar ñla instalacion de Trixbox el cual no me recono el kitstar que puedo hacer

incomming calls eroor

Anonymous — Wed, 16 Jul 2008 11:56:21 -0000

hi there guys.

I really need your help on a problem with my snom 320 switchboard, wich runs on trixbox ce on a sangoma A200/Remora FXO/FXS Analog AFT card. all incoming calls are getting lost. we have two incoming lines that hunt when one or the other is busy. when I phone either of the numbers it immediatly goes to: "the extension you are calling is currently busy". I have rebooted it and re-entered the ip adresses over and over again. all the other softphones we have on our pc's can dail out without any problems. after office hours we have a lock on the switchboard that allows all incomming calls to immediatly go to the all the other extensions. so after hours a person can call in without a problem.

I hope I explained it as detailed as needed. any help will be greatly appreciated.

regards

charl(sa)

Cisco 7970

Anonymous — Tue, 03 Oct 2006 11:40:35 -0000

On website www.trixbox.org it states that 7970 works
with end point manager. My 7970 and 7940 do not get
found by end point manager. I however have the 7940
working from a config file Ive been able to create
through the cisco config area of trixbox.

Can someone post the default trixbox config for the
SIP 7970 so I can edit it for my setup?

Ive tried using ones posted on www.voip-info.org with
no success.

Thanks

Ashrak

A2billing

sou-sim — Thu, 17 Aug 2006 13:41:09 -0000

Am using Asterisk@home 2.8 and want to be using
a2billing for billing. I have followed the installation
and user guides from http://wiki.asterisk2billing.org/.

created trunk, ratecard, tariffgroup and customer.
Linked customer card to tariffgroup. Linked tarrif
group to tarrif plan and rate card. Linked ratecard to
trunk. And put the right protocal ( on trunk.

After this i can dial a number, get a pin code request
and punch it in. The its the system asks me to dial the
number which i do. Then i get the message 'the number I
have dialed is currently unavailable.. try again'

I tried to created another trunk with another protocal
IAX2 (to call my other asterisk box). Then try to dial
and i get the message ' there is no responce'

Can anyone help me. I think a2billing is a nice billing
system and i want to use it more. Another questin is
how do i disable the asking of pin code when a user is
calling another internal extension?

i will appreciate your inputs.

Regards,

SOUZA

TrixBox & TFTP Boot

Anonymous — Fri, 04 Aug 2006 04:24:36 -0000

Hi Everybody, I'm trying to setup Auto Phone/ATA
(Sipura)Provisioning via the TFTP server build in the
TrixBox 1.1.1 Server. Here is a sample of /var/log/secure:

Aug 2 17:31:51 localhost xinetd[2390]: START: tftp
pid=20170 from=192.168.1.2

What are the files i should edit?

Many thanks for your help.

John.

TrixBox Schema Diagram

Anonymous — Wed, 26 Jul 2006 00:01:25 -0000

We're currently evaluating trixbox for deployment in
hundreds of small sites.

One of the key features required is the ability to
provide centralised reporting. This can be done quite
easily using our existing reporting platforms
(Jasper/iCharts).

Unfortunately voice is not our area of expertise and
it is difficult to understand all the database
relationships using the myPHPadmin front end.

Is there a structure diagram available that explains
those relationships?

ISO

Mitch — Fri, 02 Jun 2006 19:50:54 -0000

I know this is goign cause some laughter but I tryign
to install the trixbox.iso file on a pc currently
with XP prof on - can anyone give me a noddies guide
on how to do it.

All I want is to set up AAH-Trixbox at home -
Obviously I don't have any Linux experience

module update problems

rd beamer — Thu, 01 Jun 2006 22:25:10 -0000

hi:
When I try to use the module updater, i get the
following error:

Warning:
file_get_contents(http://amportal.sourceforge.net/modules-2.2.xml):
failed to open stream: HTTP request failed! HTTP/1.1
404 Not Found in /var/www/html/admin/page.modules.php
on line 445

I am assuming this is caused no having modules-2.2.xml
installed (???). When i try to go to the file on line
i get the following:

An error has been encountered in accessing this page.

1. Server: amportal.sourceforge.net
2. URL path: /modules-2.2.xml
3. Error notes: File does not exist:
/home/groups/a/am/amportal/htdocs/modules-2.2.xml
4. Error type: 404
5. Request method: GET
6. Request query string:
7. Time: 2006-06-01 15:16:25 PDT (1149200185)

thought you would want to know

Sugar CRM blank pages

Anonymous — Tue, 23 May 2006 19:51:22 -0000

When editing certain pages in SugarCRM (employees) a
blank page is displayed. I've done some research and it
looks like Sugar wants PHP 4.3.10 or 4.4.2. Can you
please research and fix this problem with Sugar? I'm
not sure if this is a CentOS limitation.

junghanns quad Bri ISDN card

Stamoultas Chris — Sun, 21 May 2006 17:16:31 -0000

PLEASE I need help with junghanns quad Bri ISDN card. I
have tryed everythink but I can't compile succesfuly
the qozap driver. With 0.2.0-RC8r (* 1.0.10) driver I
get this message "qozap no version for "zt_receive"
found. kernel tainted". I make install the qozap.ko
file but when i load "insmod qozap.ko ports=0" (all
ports are TE mode) I get the same message and ztcfg
dosn't work. The driver doesn't load properly and all
the leds are red permenatlly. Now with 0.3.0-PRE-1p (*
1.2.7.1)driver I can't compile at all the driver. make
returns a dozen of errors. Please I can't take it
anymore... I have been trying over 2 weeks and nothink.
Does anyone run asterisk@home with junghanns quad Bri
ISDN card and succeded ??????????? Help anyone