bandwidth limit problem

Anonymous — Wed, 18 Feb 2004 21:41:19 -0000

Hi, I have one 386 Kbit link on my eth1 interface. I tried
to assign to my users on per-user bassis 64Kbit of
traffic, so every user can get its own maximum 64 Kbits.

When I set up this control only for one user, everithing
looks fine. But if I assign the same control to several ip-
s that are in use, everything becomes too slow.
Can You tell me where I make mistake?
This is config I am using with CBQ.init
filename: cbq-064.kbs
config:
DEVICE=eth1,10Mbit,10Mbit
RATE=64Kbit
WEIGHT=6Kbit
PRIO=5
RULE=192.168.0.10
RULE=192.168.0.11

Thanx in advance,

Alex

Recent changes to 13: bandwidth limit problem

bandwidth limit problem