Problem in installation

Tatsuro MATSUOKA — Sat, 02 Apr 2022 05:01:28 -0000

For 5.5, two extra librariles should be installed for webp terminal andLibrary containing Amos routines for complex functions if you need those features.

$ sudo apt install libwebp-dev
$ sudo apt install libopenspecfun-dev

Problem in installation

Tatsuro MATSUOKA — Fri, 01 Apr 2022 10:36:54 -0000

The below is the configration summary in config.log.

 ** Configuration summary for gnuplot 5.5:

 gnuplot will be compiled with the following terminals:

   Standalone terminals: yes (included by default)
     canvas, cgm, context, dumb, dxf, emf, epslatex,
     fig, hpgl, pcl5, postscript,
     pict2e, pslatex, pstex, pstricks, svg, texdraw, tkcanvas

   dot-matrix terminals: no (use --with-bitmap-terminals to enable)
     printers: epson, nec, okidata, tandy, seiko dpu414 
               hp500c, hpdj, hpljii, hppj, starc
     other:    block pbm 

   tektronix terminal emulators: yes ( --without-tektronix to disable)
     tek410x tek40 vttek xterm kc_tek40 km_tek40 selanar sixeltek bitgraph
     note: not needed for sixel graphics output to vt100-series emulators

   Platform-specific, legacy, or specialized terminals omitted by default:
     ggi       :  no   (use --with-ggi to enable, requires libggi)
     gpic      :  no   (use --with-gpic to enable)
     tgif      :  no   (use --with-tgif to enable)
     metafont  :  no   (use --with-metafont to enable)
     metapost  :  no   (use --with-metapost to enable)
     ReGIS     :  no   (use --with-regis to enable)
     caca      :  no   (use --with-caca to enable)
     aqua (OSX):  no

   Other terminals that can be enabled but have no ./configure option:
     eepic, emtex, hp2623a, hp2648, imagen, kyocera, latex, mif, tpic 
     qms, pm (makefile.os2), be (BeOS), svga (MSDOS/djgpp), windows

   x11 (X Window System) : no (requires X libraries)
   libgd-based png, jpeg, gif, and sixel terminals: no (requires libgd,  see config.log) 
   cairo-based terminals: no (requires cairo>=1.2, pango>=1.22, glib>=2.28)
   webp terminal: no (requires cairo, pango, libwebp, libwebpmux)
   lua/TikZ terminal: no 
   wxt terminal: no (requires C++, wxWidgets>2.6, cairo>0.9, pango>1.22)
   Qt terminal: no (use --with-qt or --with-qt=qt4 to enable

 gnuplot will be compiled with the following configurable features:

   Mouse support in interactive terminals: no
   Typing <space> in plot window raises console: yes
   Readline library: builtin minimal (use --with-readline=gnu for GNU readline)
   Command-line history file: yes
   Check current directory for .gnuplot file: no (use --with-cwdrc to enable)
   Sort help/subtopic tables by column: no (use --without-row-help to enable)
   cerf() and other special functions: no (libcerf not found)
   Library containing Amos routines for complex functions not found
   Complex exponential integral cexint from libamos: no
   plugin support for loading external functions: yes 
   Statistical summary of data ("stats" command): yes

 gnuplot will install the following additional materials:

   TeX files will be installed in /usr/local/share/texmf/tex/latex/gnuplot
                                (use --with-texdir=DIR to change)
   PostScript prologue files: ${datarootdir}/gnuplot/5.5/PostScript/
   Help file: ${datarootdir}/gnuplot/5.5/gnuplot.gih

Your source is master branch (the development branch (version 5.5) but not branch-5-4-stable.
Your build lacks the preparation of external dependencies.

The easist way to get dependencies for gnuplot is to use

$ sudo apt build-dep gnuplot

Before using the above, read and follow the below:
https://askubuntu.com/questions/496549/error-you-must-put-some-source-uris-in-your-sources-list

Problem in installation

Pramod Sharma — Fri, 01 Apr 2022 08:17:34 -0000

Thank you for your reply.
Required details are as follow;
Ubuntu 20.04, gcc 9.4.0, g++ 9.4.0, gnuplot branch-5-4-stable

I have also added "config.log" file. I think there is error related to gcc.

Thanks

Problem in installation

Tatsuro MATSUOKA — Thu, 31 Mar 2022 05:24:15 -0000

Please save your config.log file as an attachment file.
We can see that how your configragtion phase were proceeded.

Problem in installation

Pramod Sharma — Wed, 30 Mar 2022 10:11:28 -0000

Hi,

I followed steps;
(i) ./prepare
(ii) ./configure
(ii) make
But I'm getting error as follows;

In file included from term.h:342,
from term.c:1212:
../term/pslatex.trm: In function ‘EPSLATEX_common_init’:
../term/pslatex.trm:431:50: error: ‘GP_CAIRO_SCALE’ undeclared (first use in this function)

........
........so on

please help.

Recent posts to Problem in installation

Problem in installation

Problem in installation

Problem in installation

Problem in installation

Problem in installation