Recent changes to support-requests

#5 Eject-button does not work

tony mancill — Sun, 19 Jul 2020 23:32:19 -0000

status: open --> accepted
assigned_to: tony mancill
Group: -->

#5 Eject-button does not work

tony mancill — Sun, 19 Jul 2020 23:31:43 -0000

Hi Andreas,

Thank you for reporting this. I am able to reproduce this failure as well and am working on a patch to update the code to try the SG comands if the normal CDROMEJECT ioctl fails. I suspect that if you run "eject -v" that you will see similar output:

$ eject -v /dev/cdrom 

eject: device name is `/dev/sr0'
eject: /dev/sr0: not mounted
eject: /dev/sr0: is whole-disk device
eject: /dev/sr0: trying to eject using CD-ROM eject command
eject: CD-ROM eject command failed
eject: /dev/sr0: trying to eject using SCSI commands
eject: SCSI eject succeeded

Eject-button does not work

Andreas — Tue, 28 Jan 2020 17:16:18 -0000

Within the terminal using 'eject /dev/cdrom' works properly, but the Eject-button of Ripperx has no function.

Eject-button does not work

Andreas — Tue, 28 Jan 2020 17:16:18 -0000

Ticket 5 has been modified: Eject-button does not work
Edited By: tony mancill (tmancill)
Status updated: u'open' => u'accepted'
Owner updated: None => u'tmancill'

Opus (audio format)

Anonymous — Mon, 12 Nov 2012 00:38:03 -0000

please add support for Opus (audio format)....

Opus is a lossy audio compression format

ide-scsi and permission error

Anonymous — Tue, 26 Jul 2005 07:40:32 -0000

ripperx (v.2.6.6) works perfectly without the ide-scsi
emulation, but with this emulation (lilo modified, and
proper modules loaded) reports an error code 14 with
(when option in Config|Wav forces -d /dev/scd0) or an
error code 32 (option empty in Wav section of the
Config menu). The scsi emulation allows for data cdrom
correct mounting, and the gnome "CD play" succeeds in
playing audio files with the scsi emulation. xmms has
similar problems with scsi emulation.

I have a laptop fujitsu siemens lifebook S5582,
(PIII-M), with a debian sarge (kernel 2.4.26, not yet
customized), updated. I recently upgraded it to sarge,
and ripperx was perfectly working before, on a woody
with the scsi emulation.

Thanks for your help...

Laurent.

laurent.larger@univ-fcomte.fr

RipperX stops working

Anonymous — Mon, 13 Sep 2004 21:41:08 -0000

I have installed RipperX with all the needed
requirements and have used the Slack Packs provided by
Xgates from www.SlackCare.com and have used it to rip
about 30 cds and then all the sudden it stops working
as when I play the file it has no sound at all. From
there the files are around the correct size have
id3tags so I would think they have info and not just
blank files.. I have asked in #slackware in
irc.freenode.net and many other good people that are
slackware savy but unsucessful on that. I'm running
Slackware 10 on kernel 2.6.7 with everything else
working but this after a little time. It usually does
like 30 - 40 cds and in the middle of that just stops
encoding with sound or something. I have even went
into the config and checked disable cdparanoia which no
luck at all. Some help would be appreciated sometime..

Invisible_Slack@l2dogsofwar.com

Invisible_Slack in Channel #slackcare on
irc.freenode.net Proudly supports Slackcare

help

Anonymous — Mon, 08 Dec 2003 20:17:00 -0000

i'm new to linux. How do you install and run ripperX?