https://sourceforge.net/p/xbox-linux/bugs/12/Recent changes to 12: No (or low?) scart switch voltageenSun, 03 Apr 2005 17:16:41 -0000https://sourceforge.net/p/xbox-linux/bugs/12/Background: Running Gentoox Home 3.2 on a very early JPN box \(bought on release day\). Using Evox dash 3935 and an Evox M7 bios. Installed to E via ftp Running xfce, "composite" pal 800x600 hoc13, voc15. The xbox is connected via Scart to a mechanical switch box into a Sky+ receiver, then into a 4:3 JVC TV, using RGB. Xbox boot animation, Evox dash, and all games all set the Scart pin 8 control signal so that the Sky box & TV switch to display the Xbox automatically. Problem: As soon as I launch Gentoox from the dash the TV switches back to showing analog TV. If I manually select the AV0 channel on the TV then I can see the Xbox output perfectly, in crisp RGB. Hypothesis: The Sky+ box must be seeing some voltage on pin8 and is therefor switching to display the Xbox input, but my TV doesn't see enough voltage to switch. \(From previous experience, I don't think my TV will switch to a 16:9 switch voltage \(5v\) but needs a 4:3 \(12V\) signal.\) Conclusion: I think Gentoox may be configuring the video chip to output a 16:9 switch voltage, when it should be setting it to 4:3. Hope this helps Simon AnonymousSun, 03 Apr 2005 17:16:41 -0000https://sourceforge.net643884967c08eae404eae733e05a79bf79cdc9cc