Search Results for "programable cdi esp32"

This is a programmable CDI project that can be programmed using Android with a Bluetooth connection which is already built in on ESP32, with a density resolution of 0.1 degrees / 250rpm and can rotate up to 18,000rpm.

This project is intended to be coupled with my other LoRa board based project, 70cm Ham Radio Fox Hunt Beacon, which can be found at the link below: https://lora-ham-fox-hunt-beacon-70cm.sourceforge.io The receiver, also ESP32 LoRa-based, is designed for simplicity and accessibility, requiring minimal user setup. It features an OLED display providing real-time frequency readout and received signal strength indication (RSSI), presented numerically in dBm, as an S-meter value, and via a...

This project explores embedded RF development using Arduino on ESP32 LoRa hardware, implementing a CW Fox Hunt Beacon and a separate project for a dedicated receiver. The beacon transmits a user configurable, identification string, in Morse code at 12 WPM, followed by a 10-second carrier and 20-second pause cycle. It operates at ~10 mW, offering several hours of runtime on an 800 mAh battery. The firmware allows full parameterisation in code, including operating frequency, CW speed,...