Open Source Linux Robotics Software
Sort By:
Robotics Software for Linux
View 10 business solutionsBrowse free open source Robotics software and projects for Linux below. Use the toggles on the left to filter open source Robotics software by OS, license, language, programming language, and project status.
-
Skillfully - The future of skills based hiringSkillfully transforms hiring through AI-powered skill simulations that show you how candidates actually perform before you hire them. Our platform helps companies cut through AI-generated resumes and rehearsed interviews by validating real capabilities in action. Through dynamic job specific simulations and skill-based assessments, companies like Bloomberg and McKinsey have cut screening time by 50% while dramatically improving hire quality.
-
The Most Powerful Software Platform for EHSQ and ESG ManagementChoose from a complete set of software solutions across EHSQ that address all aspects of top performing Environmental, Health and Safety, and Quality management programs.
-
1
OpenCV
Open Source Computer Vision Library
The Open Source Computer Vision Library has >2500 algorithms, extensive documentation and sample code for real-time computer vision. It works on Windows, Linux, Mac OS X, Android, iOS in your browser through JavaScript. Languages: C++, Python, Julia, Javascript Homepage: https://opencv.org Q&A forum: https://forum.opencv.org/ Documentation: https://docs.opencv.org Source code: https://github.com/opencv Please pay special attention to our tutorials! https://docs.opencv.org/master Books about the OpenCV are described here: https://opencv.org/books.html -
2
CNCjs
A web-based interface for CNC milling controller running Grbl, Marlin,
A web-based interface for CNC milling controller running Grbl, Smoothieware, or TinyG. It runs on a Raspberry Pi or a laptop computer that you have Node.js installed, connecting to the Arduino over a serial connection using a USB serial port, a Bluetooth serial module, or a Serial-to-WiFi module like XBee or USR-WIFI232-T. -
3
Robocode
Robocode is a programming tank game for Java
Robocode is a programming game, where the goal is to develop a robot battle tank to battle against other tanks with Java. The robot battles are running in real-time and on-screen. The motto of Robocode is: Build the best, destroy the rest! -
4
GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the easiest tool set available - supporting over 1400 microcontrollers with tools to make this fun and simple. Please see the download section for your options. We have two IDEs, we have just the compiler and we have a minimal install - it is your choice. Please see the homepage here: https://gcbasic.com
-
Teradata VantageCloud Enterprise is a data analytics platform for performing advanced analytics on AWS, Azure, and Google Cloud.VantageCloud is the complete cloud analytics and data platform, delivering harmonized data and Trusted AI for all. Built for performance, flexibility, and openness, VantageCloud enables organizations to unify diverse data sources, run complex analytics, and deploy AI models—all within a single, scalable platform.
-
5
dxf2gcode
DXF2GCODE: converting 2D dxf drawings to CNC machine compatible G-Code
DXF2GCODE is a tool for converting 2D (dxf, pdf, ps) drawings to CNC machine compatible GCode. Windows, Linux, and Mac support by using python scripting language. -
6
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information about "Boards Managers" is available on Arduino.cc official website. -
7
Arduino libraries
Arduino libraries and code
This repository contains several Arduino libraries I have written to be used in applications. Most of them include example code on how the libraries can be used. Furthermore, this repository contains a few stand-alone applications. For bugs in the libraries, please fill in an issue in Github as that makes it far easier to track them. If possible provide a minimal code snippet that exposes the bug. Add information about the platform used and version etc. Also, proposals for solutions are welcome. For improvements and changes, please provide a pull request. I will try to follow up on them asap but it can take quite some time. Please try to be generic in your improvements and try to see "over the needs of your own application". -
8
Tiny Multi Bootloader+
Serial Bootloader for Microchip, Atmel, NXP, TI, 8051 microcontrolers
What is it? It's a Bootloader for Microchip, Atmel, NXP, TI and 8051 devices. A Bootloader is a firmware running in the microcontroler device which allows the user to send it's own firmware without the need of a programmer. This Bootloader consists of: - firmwares for many devices (this firmware need to be send to the device's flash memory with a programmer, only once) - a PC software which communicates with the bootloader firmware in the device and send the user's program in its memory Where does it come from? This Bootloader is based on "Tiny PIC Bootloader" made by Claudiu Chiculita. A special THANK to him!!! What can it do? It can program: - Microchip PIC10/12/16/18/24/32/dsPIC30/33 - Atmel ATtiny, ATmega - TI MPS430 - NXP ARM Cortex-M0+ - Silicon Labs C8051 And this: - with light modifications to the Bootloader firmware for new devices - without modifying your source code or using a special linker script - via GUI or command line prog - with automatic Reset -
9
Robotics Toolbox for MATLAB
Robotics Toolbox for MATLAB
This toolbox brings robotics-specific functionality to MATLAB, exploiting the native capabilities of MATLAB (linear algebra, portability, graphics). The Toolbox uses a very general method of representing the kinematics and dynamics of serial-link manipulators as MATLAB® objects – robot objects can be created by the user for any serial-link manipulator and a number of examples are provided for well-known robots from Kinova, Universal Robotics, Rethink as well as classical robots such as the Puma 560 and the Stanford arm. The toolbox also supports mobile robots with functions for robot motion models (unicycle, bicycle), path planning algorithms (bug, distance transform, D*, PRM), kinodynamic planning (lattice, RRT), localization (EKF, particle filter), map building (EKF) and simultaneous localization and mapping (EKF), and a Simulink model a of non-holonomic vehicle. The Toolbox also includes a detailed Simulink model for a quadrotor flying robot. -
Powering the next decade of business messaging | Twilio MessagingXBuild unique experiences across SMS, MMS, Facebook Messenger, and WhatsApp – with our unified messaging APIs.
-
10
DynamixelSDK
ROBOTIS Dynamixel SDK (Protocol1.0/2.0)
DYNAMIXEL SDK is a software development kit that provides DYNAMIXEL control functions using packet communication. The API of DYNAMIXEL SDK is designed for DYNAMIXEL actuators and DYNAMIXEL-based platforms. You need to be familiar with C/C++ programming language for right use of the software. This e-Manual provides comprehensive information on ROBOTIS products and applications. -
11
ATTinyCore Universal
Arduino core for ATtiny 1634, 828, x313, x4, x41, x5, x61, x7 and x8
Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader. -
12
Sming
Open source framework simplifying the creation of C++ applications
Sming is an asynchronous embedded C/C++ framework with superb performance and multiple network features. Sming is open source, modular and supports multiple architectures including ESP8266 and ESP32. Superb performance and memory usage (Sming compiles to native firmware!) Fast and user-friendly development. Integrated host emulator to assist with developing, testing, and debugging libraries and applications on a PC before uploading them to an actual microcontroller. Built-in powerful wireless modules. Compatible with standard Libraries use popular hardware in a few lines of code. Simple yet powerful hardware API wrappers. HardwareSPI library provides advanced asynchronous SPI device master capability including the use of ESP8266 ‘overlapped’ mode for reduced pin usage and dual/quad I/O support. Modular C++ installable file system interface. -
13
TFT_eSPI
Arduino and PlatformIO IDE compatible TFT library
An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen. -
14
ESP32 BLE Keyboard library
Bluetooth LE Keyboard library for the ESP32
This library allows you to make the ESP32 act as a Bluetooth Keyboard and control what it does. Compatible with Android. Compatible with Windows. Compatible with Linux. Compatible with MacOS X (not stable, some people have issues, doesn't work with old devices). Compatible with iOS (not stable, some people have issues, doesn't work with old devices). There is also Bluetooth-specific information that you can set (optional): Instead of BleKeyboard bleKeyboard; you can do BleKeyboard bleKeyboard("Bluetooth Device Name", "Bluetooth Device Manufacturer", 100);. (Max length is 15 characters, anything beyond that will be truncated.) By default the battery level will be set to 100%, the device name will be ESP32 Bluetooth Keyboard and the manufacturer will be Espressif. This feature is meant to compensate for some applications and devices that can't handle fast input and will skip letters if too many keys are sent in a small time frame. -
15
MATLAB Robotics
MATLAB sample codes for mobile robot navigation
MATLABRobotics is a collection of robotics-related algorithms and simulation tools implemented in MATLAB. The repository brings together a wide range of robotics functionality, including path planning, control, localization, and mapping. It provides practical algorithmic implementations such as A*, RRT, Kalman filters, particle filters, and SLAM, making it a valuable resource for students, researchers, and developers learning or prototyping robotics applications. The code is written to be accessible and easy to adapt, enabling experimentation with both classical and modern robotics techniques. By using MATLAB’s visualization and numerical capabilities, the repository offers intuitive demonstrations of algorithms in action. As an open resource, it encourages contributions and serves as a foundation for building and testing robotics concepts in simulation. -
16
NVIDIA Isaac Lab
Unified framework for robot learning built on NVIDIA Isaac Sim
Isaac Lab is an open-source modular robotics learning framework built atop Isaac Sim. It simplifies research workflows across reinforcement learning, imitation learning, and motion planning by offering robust, GPU-accelerated simulation with realistic sensor and physics fidelity—ideal for sim-to-real robot training. Compatible and optimized for use with Isaac Sim versions (e.g., Sim 5.0 and 4.5). GPU-accelerated, high-fidelity physics and sensor simulation suitable for complex learning tasks. Offers a variety of robotic environment simulations on both Linux and Windows. -
17
NVIDIA Isaac Sim
NVIDIA Isaac Sim is an open-source application on NVIDIA Omniverse
NVIDIA Isaac Sim is a high-fidelity robotics simulation platform built on NVIDIA Omniverse to develop, test, and validate AI-driven robots in physically accurate virtual environments. It supports a wide array of robotics formats (URDF, MJCF, CAD), includes GPU-accelerated physics, and features immersive RTX rendering and multisensory simulation. Realistic physics via GPU-accelerated engines and RTX ray tracing. Multi-sensor simulation (RGB-D cameras, Lidar, Radar, IMU, contact sensors). Extensible via platform APIs and can integrate into custom USD-based simulators. -
18
MARIE is a robotic development and integration environment focused on software reusability and exploitation of already available APIs and middlewares used in robotics. Its main purpose is to create a rapid-prototyping approach to robotics developments.
-
19
Homie for ESP8266
ESP8266 framework for Homie, a lightweight MQTT convention
An Arduino for ESP8266 / ESP32 implementation of Homie, an MQTT convention for the IoT. This branch of Homie for ESP8266 implements Homie 3.0.1 and adds support for ESP32. PlatformIO is an open-source ecosystem for IoT development with the cross-platform build system, library manager and full support for Espressif ESP8266 development. It works on the popular host OS, Mac OS X, Windows, Linux 32/64, Linux ARM (like Raspberry Pi, BeagleBone, CubieBoard). Available in the PlatformIO registry. Pretty straightforward sketches, a simple light for example (TODO: adapt to V3). Cute HTTP API/Web UI/App to remotely send the configuration to the device and get information about it. ESP8266 framework for Homie, a lightweight MQTT convention for the IoT. -
20
RoboSchool
Open source software for robot simulation, integrated with OpenAI Gym
Roboschool is a set of open source robot simulation environments for reinforcement learning, created as an alternative to the Mujoco physics engine. It integrates with OpenAI Gym and provides a variety of continuous control tasks, including humanoid locomotion, quadrupeds, and robotic arms. The library is built on the Bullet Physics engine, making it accessible without the licensing requirements of Mujoco. Roboschool includes training scripts and examples for applying reinforcement learning algorithms to its environments. While the project has since been deprecated in favor of more modern frameworks, it remains historically significant as a bridge between early reinforcement learning research and scalable, open-access environments. Its goal was to make reproducible robot learning experiments available to a wider audience without restrictive dependencies . -
21
This repository is now frozen. The latest version of the RepRap project can be found at https://github.com/reprap.
-
22
TinyGSM
A small Arduino library for GSM modules, that just works
A small Arduino library for GSM modules that just works. This library is easy to integrate with lots of sketches that use Ethernet or WiFi. PubSubClient (MQTT), Blynk, HTTP Client, and File Download examples are provided. Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario. TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM. Now, you have more space for your experiments. TCP (HTTP, MQTT, Blynk, ...) All modules support TCP connections. Most modules support multiple simultaneous connections. TCP and SSL connections can usually be mixed up to the total number of possible connections. Many GSM modems, WiFi, and radio modules can be controlled by sending AT commands over Serial. TinyGSM knows which commands to send, and how to handle AT responses, and wraps that into the standard Arduino Client interface. -
23
BoofCV
BoofCV is an open source Java library for real-time computer vision.
BoofCV is an open source Java library for real-time computer vision and robotics applications. Written from scratch for ease of use and high performance, it provides both basic and advanced features needed for creating a computer vision system. Functionality include optimized low level image processing routines (e.g. convolution, interpolation, gradient) to high level functionality such as image stabilization. Released under an Apache 2.0 license for both academic and commercial use. -
24
The Player Project: Player is a networked interface to robots and sensors. Stage and Gazebo are Player-friendly multiple-robot simulators. The software aims for POSIX compliance and runs on most UNIX-like OS's. Some parts also work on Windows.
-
25
CoreBus
Cross-platform (Win, Linux) Modbus (TCP / RTU / ASCII) GUI terminal
CoreBus is a cross-platform terminal for working with serial ports and TCP sockets with support for Modbus TCP/RTU/ASCII protocols. Features: No Protocol * Working with data in string or byte format * Support for different encodings * There are three sending modes: single, cyclic, and file sending Modbus * Support for various Modbus protocol variations: TCP, RTU, ASCII and RTU/ASCII over TCP * Convenient operation with recording functions * The ability to work with float numbers * The ability to work with binary data * A Modbus scanner that searches for devices on a communication line Modbus monitoring * Convenient display of registers * Conversion to numeric types * Transformations by formula * Real-time charting * Logger Macros * Separate macros for each operating mode * A macro consists of an unlimited number of commands (actions) * Common Slave ID for Modbus macros * Import/Export Source code: https://github.com/AndreyAbdulkayumov/CoreBus
