Search Results for "telegram source code"

SmGen is a finite state machine (FSM) generator for Verilog. On the other hand, it is not an FSM entry tool. The input is behavioral Verilog with clock boundaries specifically set by the designer. SmGen unrolls this behavioral code and generates an FSM from it in synthesizable Verilog. Clock boundaries are explicitly provided by the designer so there is good control on the expected timing

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

This project was moved to https://gitlab.c3sl.ufpr.br/roberto/cmips The code here is no longer up to date. The VHDL model mimics the pipeline design described in Patterson & Hennessy's book (Computer Organisation and Design) and is an almost complete implementation of the MIPS32r2 instruction set. The TLB and assorted control registers will be included soon (as of fev 2015). The model was synthesized for an Altera EP4CE30F23. The model uses up 15% of combinational blocks and 5%...

This is a simple CPU design, written in Verilog, intended for educational purposes. The objective is to provide a simulatable processor where the source code exposes concepts in CPU microarchitecture.

The HDL Complexity Tool parses large complex hardware projects' source code to produce useful complexity results. GOALS: 1)Practical, effective and simple 2) Integrates with existing design flows 3) Used on real projects 4) Based on existing research

OpenVGA is an free and open FPGA-based implementation of a VGA compatible graphics adapter, and utilising low-cost hardware. The project includes the PCB schematic and artwork, Verilog HDL, firmware assembly code, and driver source code.

CRC Generator is a command-line application that generates Verilog or VHDL code for CRC of any data width between 1 and 1024 and polynomial width between 1 and 1024. The code is written in C for Win32, bus easily portable for other platforms

The Affordable BIOS Restoration Tool provides VHDL and C code to recover from failed BIOS upgrades using affordable CPLD's. EEPROM's and Flash chips can be restored with this flash programmer. Interfaces for DIP and tsop packages are being developed.

This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform. Current version supports major POSIX systems (Linux, QNX). 2) Hardware_GEDF_Scheduler: is a hardware implementation in VHDL (targeting FPGAs) of the G-EDF multiprocessor scheduling policy.

GalaxyIP (Galaxy Intellectual Property Cores) is a project devoted to accommodate a set of IP-Cores for embedded SoC development, based on the processor code named Voyager (StarTrek and the space probes).