Open Source C Wireless Software

Comgt is a command line tool for controlling, configuring and interacting with Option Wireless 3G and 2G ( HSDPA, UMTS, EDGE, GPRS, GSM) data devices within the Linux environment.

Scan for WiFi devices, block selected connections, create dozens of networks and confuse WiFi scanners! Version 3 is in development. It is stable to use, but it is very different. It is command-line based, which allows it to offer not just more features, but make them more customizable. This software allows you to easily perform a variety of actions to test 802.11 wireless networks by using an inexpensive ESP8266 WiFi SoC (System On A Chip). The main feature, the deauthentication attack, is used to disconnect devices from their WiFi network. No one seems to care about this huge vulnerability in the official 802.11 WiFi standard, so I took action and enabled everyone who has less than 10 USD to spare to recreate this project. I hope it raises more attention on the issue. In 2009 the WiFi Alliance actually fixed the problem (see 802.11w), but only a few companies implemented it into their devices and software.

Remote control software for applications using wi-fi or bluetooth.

Tomato USB is a fork of popular Tomato firmware (http://www.polarcloud.com/tomato) for Broadcom-based routers. This fork adds built-in support for USB port, wireless-N mode support, support for several newer router models, and various enhancements.

wavemon is a wireless device monitoring application that allows you to watch signal and noise levels, packet statistics, device configuration and network parameters of your wireless network hardware. It should work (though with varying features) with all devices supported by the Linux kernel. Apart from debian/ubuntu packages and slackbuild scripts for wavemon, this repository contains the full source code.

Upload, save and run keystroke injections remotely with an ESP8266 + ATmega32u4. Using a USB device that act as a keyboard to inject keystrokes is well known these days. The USB Rubber Ducky by Hak5 is THE hacker gadget for this kind of attack. It introduced a simple script language called Ducky Script, which this project uses too. The ESP8266 is a popular Wi-Fi chip used in a lot of projects. Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine.

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

Wepdecrypt is a Wireless LAN Tool written in c which guesses WEP Keys based on a active dictionary attack, key generator, distributed network attack and some other methods, it's based on wepattack and GPL licensed

GKrellm plugin monitoring Linux BlueZ adapters

A new/clean Linux kernel driver/module for IEEE 802.11 Wireless Ethernet Adapters based on Realtek's RTL8180L and RTL8185L chipset

Synchronize bluetooth mobile phone with thunderbird, lightning, sunbird, outlook etc.

The WiFi Guard Dog project is a complete and embeddable captive portal solution for wireless community groups or individuals who wish to open free HotSpots while preventing abuse of their connection. Go to dev.wifidog.org to download the latest version.

Alternative firmware and software with open source for platforms based on the SoC Realtek RTL8186. Альтернативная прошивка и ПО с открытым кодом для платформ на базе SoC Realtek RTL8186.

Airpwn is a tool for generic packet injection on an 802.11 network.

A console-based wireless scanner for Apple AirPort Wireless Cards on Mac OS X

Q5 is a complete fully open linux based router / network appliance, including hardware. It supports up to four wireless minipci cards and two 10/100 Mbps NICs. The hardware is build around AMD's AU1500 MIPS processor, running at 264 MHz.

Cloud hub is a link-level wireless mesh networking implementation. With cloud hub firmware, access points automatically find each other, optimize connection topology, and allow other ad-hoc wireless users to join as clients.

A command-line windows application to manage wireless network connections, cards and profiles. Connect to WLANs, query for RSSI, stadistics... It can be used as an example of how to use Microsoft Native Wifi API dlls from any ANSI C compatible IDE

Qt Network Manager - a network manager app using wireless extensions to provide an alternative to gnome network manager. Future plans include integrating with various desktop managers.

This project is a Linux Kernel 2.4/2.6/3.x module/console program for changing wireless radio status on the Fujitsu Siemens AMILO A1655G laptop.

Add 3.5G USB dongle support on ASUS RT-N13U The RT-N13U UI is good enough, so I don't change much. Only add 3.5G setting in advance setting--> USB Application This FW supports HUAWEI E169 E220, Bandluxe C270, OPTION 225 now.

A highly scalable network emulation tool which emulates dynamic, mobile ad-hoc wireless network topologies in real-time, featuring easy deployment and detailed network models. It was developed in the research project HIDENETS (http://www.hidenets.aau.dk)

AirGTKrack aims to be an aircrack-ng fork, featuring automation functions and a GUI.

aircrack-ng is a set of tools for auditing wireless networks. It's an enhanced/reborn version of aircrack. It consists of airodump, aireplay, aircrack, airdecap, and some tools to handle capture files (merge, convert, etc.).

aspoof is a program that modifies the Apple Airport Extreme binary to spoof the MAC address of the wireless card.