roprinters-users Mailing List for Printers+ for RISC OS

In message <E1B...@sc...> you wrote:


> Message: 1
> From: Ian K <rop...@ia...>
>
snip

> You should of been supplied a copy of 'Pop-up' Printers with your Iyonix
> which is 32 bit compatible. This is basically the same apart from the
> networking support. If you don't have a copy it is available on
> www.iyonix.com.
>
 Hmm. couldn't find it.

So presumably it will be on the image CD that came
 with the Iyonix?

Charles
-- 
020 8949 0708 / 079 5620 0176 

In article <6bd...@cl...>,
   charles <ch...@ba...> wrote:
> Dear All,

> I have down loaded Printers+ 1.91a but when I try and run it I
> get this error message.

> Is there a simple way around this?

> I am trying to get printing to work a little better for me on the Iyo.


Unfortunately Printers+ isn't 32 bit compatible at the moment, as the back
end control modules weren't included in the licence, so converting them
hasn't been possible.

You should of been supplied a copy of 'Pop-up' Printers with your Iyonix
which is 32 bit compatible. This is basically the same apart from the
networking support. If you don't have a copy it is available on
www.iyonix.com.

Regards
Ian K

-- 
  There are 3 mailing lists for Printers+. An announcements list, a users
   discussion for the use of Printers+ and a development discussion list.
                You can subscribe to any of these lists at:
                http://sourceforge.net/mail/?group_id=71687

 You report bugs to http://sourceforge.net/tracker/?group_id=71687&atid=538622
Or request a feature http://sourceforge.net/tracker/?group_id=71687&atid=538625

Dear All,

I have down loaded Printers+ 1.91a but when I try and run it I
get this error message.

Is there a simple way around this?

I am trying to get printing to work a little better for me on the Iyo.


Charles
-- 
020 8949 0708 / 079 5620 0176 

Hi,

My IPP (Internet Printer Protocol) device driver module is available to
download. You can use it to print to network printers and servers
directly from RISC OS using the PostScript printer drivers.

Using CUPS on a UNIX server, you can use the Gimp-Print drivers from
even very modest RISC OS hardware.

You can get it from http://www.davel.me.uk/riscos/

Cheers,
Dave

In article <4c2...@ia...>, Ian K
<rop...@ia...> wrote:
> We would like to get a better picture of what you would like added to
> Printers+. All your suggestions are helpful particularly the ones you
> feel are most urgent. Please bare in mind that we aren't able to improve
> the mechanism that communicates with the individual printers only the
> control mechanism.

At the last Wakefield Show, in a discussion with Castle's JL, he expressed
the idea that the major printer manufactures ie Canon, Epson HP etc were
collaborating on some common aspects of driving them. This to me sounds
somewhat unlikely but I assume he knows something.

Would !Printers developers find out what there was in this? and how may it
affect development?

-- 
Kind Regards,
Grant Randall

<gra...@nt...> Yorkshire, GB
http://homepage.ntlworld.com/grant.randall Randalls Home Page
During shift periods, I may be slow to reply, please bear with me...

Hello All

We would like to get a better picture of what you would like added to
Printers+. All your suggestions are helpful particularly the ones you feel
are most urgent. 
Please bare in mind that we aren't able to improve the mechanism that
communicates with the individual printers only the control mechanism.

you can ether post a feature request by visiting:
http://sourceforge.net/tracker/?group_id=71687&atid=538625

Or post it here so it can be debated.

Regards
Ian K (Developer)

[Copied to the users list for information only, future announcements will be
to the announce list only]

Printers+ 1.91 release
======================

Printers+ 1.91 has now been released, and is available for download
from http://roprinters.sourceforge.net/

Printers+ 1.91 is the first release of open source Printers+ to be
made through SourceForge.net. Printers+ 1.91 is functionally identical
to the previous version 1.90b4 released through RISC OS Select, but is
being released as a common starting point for open source Printers+
development.

Sourceforge.net
---------------

Printers+ is hosted as an open source project on SourceForge.net.
SourceForge.net provides the ability to track feature requests and bug
reports for hosted projects, and the Printers+ project will be making
use of these features.

To report a bug in Printers+ visit:
http://sourceforge.net/tracker/?group_id=71687&atid=538622

To request a new feature for Printers+ visit:
http://sourceforge.net/tracker/?group_id=71687&atid=538625

Mailing lists
-------------

The Printers+ project has three mailing lists. The announce list is
a very low volume list for announcement of new releases of Printers+
only. The users list is for discussion of the use of Printers+.

The new development list is for discussion of the development of
open source Printers+.

To subscribe to any of these lists please visit the project mailing
list page at:
http://sourceforge.net/mail/?group_id=71687

-- 
David Marston
rop...@il...