staf-users Mailing List for SW Test Automation Framework

I'm not sure if this list is still active, but here goes.

The STAF Perl interface doesn't seem to work anymore since moving from
Ubuntu 12.04 to 16.04. In particular STAF::Submit is giving errors now. I
thought this was my code, but even the demo script doesn't work:

 ./STAF.pl local ping ping
Usage: STAF::Submit(location, service, request, syncoption=kSTAFReqSync) at
./STAF.pl line 29.

STAF::Submit should only be requiring 3 args, per the docs. Adding the
fourthone (should be only needed for Submit2) doesn't work either.

Anyone seen this? Happens with both STAF 3.4.17 and 3.4.26. I've even tried
compiling it from scratch and get the same result.

Thanks,

Scott

Hi Sharon
I sent you the program that demonstrate the problem
Can you please update ?

From: Sharon Lucas [mailto:slu...@au...]
Sent: Friday, September 15, 2017 1:33 AM
To: Chaim Nachmani
Cc: sta...@li...
Subject: Re: [EXT] Re: [staf-users] RC 10 and RC OS 32

I understand that you are submitting requests to different STAF services in parallel. We do that all the time with no issues.

Yes, if you have something you can send me that I can run to try to recreate the problem you are seeing please do so

Sharon Lucas

On Sep 13, 2017, at 2:00 AM, Chaim Nachmani <cna...@ma...<mailto:cna...@ma...>> wrote:
Hi Sharon

As I tried to explain in my mail, the problem is that I am doing two different tasks in parallel and they are interfere
I do "Copy" on file A and then delete it
and doing "Run" (process start command) on file B simultaneously.
if I do only the COPY --> Delete I am not getting any problem

This is the problem I am talking about
If you want I can send you a small program that will ensure you will get the error

From: Sharon Lucas [mailto:slu...@au...]
Sent: Tuesday, September 12, 2017 8:35 PM
To: Chaim Nachmani
Cc: sta...@li...<mailto:sta...@li...>
Subject: [EXT] Re: [staf-users] RC 10 and RC OS 32

External Email
________________________________
You can run STAF service requests for any Service in parallel. There are no flags to set.

Windows system error code 32 is "The process cannot access the file because it is being used by another process."

So, it would appear that some file is trying to be deleted or written to, etc when it is in use by something else.

Sharon Lucas

On Aug 28, 2017, at 4:52 AM, Chaim Nachmani <cna...@ma...<mailto:cna...@ma...>> wrote:

Hi All



I am working with STAF for very long time and I have some problem that I can’t override it for quit a long time

When running "Process start command" service in parallel to "FS copy" (on two different files) on the same remote machine I am getting the error RC 10 and RC OS 32 when trying to do some operation on the copied file (such as delete, Process start command)

I am not accessing the same file.
I do "Copy" on file A
and doing "Run" (process start command) on file B simultaneously.
and I am getting the error when trying to Run/Delete file A while file B is running (when file B is finish running the problem is solved)

I am running on windows and using the C++ dlls of STAF
STAF version 3.4.24.1

(when I try to run the same service (e.g. Process ,"FS" ) in parallel ,everything is working, only when I try to "Mix" services I encountered a problem.)
Do I need to "turn on" some flag when using the STAF in parallel on the same remote machine?



Thanks



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org<http://Slashdot.org>! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...<mailto:sta...@li...>
https://lists.sourceforge.net/lists/listinfo/staf-users

I understand that you are submitting requests to different STAF services in parallel. We do that all the time with no issues. 

Yes, if you have something you can send me that I can run to try to recreate the problem you are seeing please do so 

Sharon Lucas

> On Sep 13, 2017, at 2:00 AM, Chaim Nachmani <cna...@ma...> wrote:
> 
> Hi Sharon
>  
> As I tried to explain in my mail, the problem is that I am doing two different tasks in parallel and they are interfere
> I do "Copy" on file A and then delete it
> and doing "Run" (process start command) on file B simultaneously.
> if I do only the COPY à Delete I am not getting any problem
>  
> This is the problem I am talking about
> If you want I can send you a small program that will ensure you will get the error
>  
> From: Sharon Lucas [mailto:slu...@au...] 
> Sent: Tuesday, September 12, 2017 8:35 PM
> To: Chaim Nachmani
> Cc: sta...@li...
> Subject: [EXT] Re: [staf-users] RC 10 and RC OS 32
>  
> External Email
> You can run STAF service requests for any Service in parallel. There are no flags to set. 
>  
> Windows system error code 32 is "The process cannot access the file because it is being used by another process."  
>  
> So, it would appear that some file is trying to be deleted or written to, etc when it is in use by something else. 
> 
> Sharon Lucas
> 
> On Aug 28, 2017, at 4:52 AM, Chaim Nachmani <cna...@ma...> wrote:
> 
> Hi All
>  
> I am working with STAF for very long time and I have some problem that I can’t override it for quit a long time
> When running "Process start command" service in parallel to "FS copy" (on two different files) on the same remote machine I am getting the error RC 10 and RC OS 32 when trying to do some operation on the copied file (such as delete, Process start command)
> I am not accessing the same file.
> I do "Copy" on file A 
> and doing "Run" (process start command) on file B simultaneously.
> and I am getting the error when trying to Run/Delete file A while file B is running (when file B is finish running the problem is solved)
> 
> I am running on windows and using the C++ dlls of STAF
> STAF version 3.4.24.1
> (when I try to run the same service (e.g. Process ,"FS" ) in parallel ,everything is working, only when I try to "Mix" services I encountered a problem.) 
> Do I need to "turn on" some flag when using the STAF in parallel on the same remote machine?
>  
> Thanks
>  
>  
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> staf-users mailing list
> sta...@li...
> https://lists.sourceforge.net/lists/listinfo/staf-users

Hi Sharon

As I tried to explain in my mail, the problem is that I am doing two different tasks in parallel and they are interfere
I do "Copy" on file A and then delete it
and doing "Run" (process start command) on file B simultaneously.
if I do only the COPY --> Delete I am not getting any problem

This is the problem I am talking about
If you want I can send you a small program that will ensure you will get the error

From: Sharon Lucas [mailto:slu...@au...]
Sent: Tuesday, September 12, 2017 8:35 PM
To: Chaim Nachmani
Cc: sta...@li...
Subject: [EXT] Re: [staf-users] RC 10 and RC OS 32

External Email
________________________________
You can run STAF service requests for any Service in parallel. There are no flags to set.

Windows system error code 32 is "The process cannot access the file because it is being used by another process."

So, it would appear that some file is trying to be deleted or written to, etc when it is in use by something else.

Sharon Lucas

On Aug 28, 2017, at 4:52 AM, Chaim Nachmani <cna...@ma...<mailto:cna...@ma...>> wrote:

Hi All



I am working with STAF for very long time and I have some problem that I can’t override it for quit a long time

When running "Process start command" service in parallel to "FS copy" (on two different files) on the same remote machine I am getting the error RC 10 and RC OS 32 when trying to do some operation on the copied file (such as delete, Process start command)

I am not accessing the same file.
I do "Copy" on file A
and doing "Run" (process start command) on file B simultaneously.
and I am getting the error when trying to Run/Delete file A while file B is running (when file B is finish running the problem is solved)

I am running on windows and using the C++ dlls of STAF
STAF version 3.4.24.1

(when I try to run the same service (e.g. Process ,"FS" ) in parallel ,everything is working, only when I try to "Mix" services I encountered a problem.)
Do I need to "turn on" some flag when using the STAF in parallel on the same remote machine?



Thanks



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org<http://Slashdot.org>! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...<mailto:sta...@li...>
https://lists.sourceforge.net/lists/listinfo/staf-users

You can run STAF service requests for any Service in parallel. There are no flags to set. 

Windows system error code 32 is "The process cannot access the file because it is being used by another process."  

So, it would appear that some file is trying to be deleted or written to, etc when it is in use by something else. 

Sharon Lucas

> On Aug 28, 2017, at 4:52 AM, Chaim Nachmani <cna...@ma...> wrote:
> 
> Hi All
>  
> I am working with STAF for very long time and I have some problem that I can’t override it for quit a long time
> When running "Process start command" service in parallel to "FS copy" (on two different files) on the same remote machine I am getting the error RC 10 and RC OS 32 when trying to do some operation on the copied file (such as delete, Process start command)
> I am not accessing the same file.
> I do "Copy" on file A 
> and doing "Run" (process start command) on file B simultaneously.
> and I am getting the error when trying to Run/Delete file A while file B is running (when file B is finish running the problem is solved)
> 
> I am running on windows and using the C++ dlls of STAF
> STAF version 3.4.24.1
> (when I try to run the same service (e.g. Process ,"FS" ) in parallel ,everything is working, only when I try to "Mix" services I encountered a problem.) 
> Do I need to "turn on" some flag when using the STAF in parallel on the same remote machine?
>  
> Thanks
>  
>  
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> staf-users mailing list
> sta...@li...
> https://lists.sourceforge.net/lists/listinfo/staf-users

Hi All



I am working with STAF for very long time and I have some problem that I can't override it for quit a long time

When running "Process start command" service in parallel to "FS copy" (on two different files) on the same remote machine I am getting the error RC 10 and RC OS 32 when trying to do some operation on the copied file (such as delete, Process start command)

I am not accessing the same file.
I do "Copy" on file A
and doing "Run" (process start command) on file B simultaneously.
and I am getting the error when trying to Run/Delete file A while file B is running (when file B is finish running the problem is solved)

I am running on windows and using the C++ dlls of STAF
STAF version 3.4.24.1

(when I try to run the same service (e.g. Process ,"FS" ) in parallel ,everything is working, only when I try to "Mix" services I encountered a problem.)
Do I need to "turn on" some flag when using the STAF in parallel on the same remote machine?



Thanks

Hi,
I responded to this same question that you posted via the STAF Help 
Discussion forum at 
https://sourceforge.net/p/staf/discussion/104046/thread/ecb6b594/

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   Shambhu Sharma <sha...@gm...>
To:     sta...@li...
Date:   07/11/2017 01:17 AM
Subject:        [staf-users] Not able to run GUI app on remote STAF host



Hi,
I just installed STAF on two Ubuntu 16.04 machines and able to run command 
using "staf <remotehost> <service> <request>". But when I try to run gui 
application on remote host, it is throwing DISPLAY error. I am accessing 
both Linux machines through Putty (from windows client) with X11 
forwarding enabled and also I have installed xming. Note that, if I run: $ 
staf local process start shell command "xclock" wait stderrtostdout 
returnstdout , it is working fine. But if i use:
$ staf remotehost process start shell command "xclock" wait stderrtostdout 
returnstdout
I am getting below error:

Response
---------------------
{
Return Code: 1
Key : <None>
Files : [
{
Return Code: 0
Data : Error: Can't open display: localhost:10.0
}

]
}
Interestingly, If I have putty session running for remotehost, then clock 
gui starts fine. So it seems that through STAF, X11 forwarding is not 
getting enabled. Please let me know how to enable it in STAF 
configuration.
Regards,
Shambhu.
-- 
If linux doesn't have a solution, then u have a wrong problem.

Shambhu Kumar Sharma
91-98807 52962
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users

Hi,

I just installed STAF on two Ubuntu 16.04 machines and able to run command
using "*staf <remotehost> <service> <request>"*. But when I try to run gui
application on remote host, it is throwing DISPLAY error. I am accessing
both Linux machines through Putty (from windows client) with X11 forwarding
enabled and also I have installed xming. Note that, if I run: *$ staf local
process start shell command "xclock" wait stderrtostdout returnstdout* , it
is working fine. But if i use:
*$ staf remotehost process start shell command "xclock" wait stderrtostdout
returnstdout*
I am getting below error:

Response

---------------------

{
Return Code: 1
Key : <None>
Files : [
{
Return Code: 0
Data : Error: Can't open display: localhost:10.0

}

]
}

Interestingly, If I have putty session running for remotehost, then clock
gui starts fine. So it seems that through STAF, X11 forwarding is not
getting enabled. Please let me know how to enable it in STAF configuration.
Regards,
Shambhu.
-- 
If linux doesn't have a solution, then u have a wrong problem.

Shambhu Kumar Sharma
91-98807 52962

Yes, the /usr/local/staf/lib/perl518 directory only contains the 
libPLSTAF.so library for STAF support for Perl 5.18.

# ls -l /usr/local/staf/lib/perl518
total 80
-rwxrwxr-x 1 root root 70745 Jun  7  2016 libPLSTAF.so

I was trying to tell you that the PERLLIB environment variable needs to 
contain the /usr/local/staf/bin directory as it contains the PLSTAF.pm 
module that STAF Perl suport also requires (in addition to setting PERLLIB 
to contain /usr/local/staf/lib/perl518).    export 
PERLLIB=/usr/local/staf/bin:/usr/local/staf/lib/perl518

# ls -l /usr/local/staf/bin/*.pm
-rwxrwxr-x 1 root root 48322 Jun  7  2016 /usr/local/staf/bin/PLSTAF.pm
-rwxrwxr-x 1 root root  6991 Jun  7  2016 
/usr/local/staf/bin/PLSTAFService.pm
-rwxrwxr-x 1 root root  5173 Jun  7  2016 /usr/local/staf/bin/STAFLog.pm
-rwxrwxr-x 1 root root  2735 Jun  7  2016 /usr/local/staf/bin/STAFMon.pm

Yes, you must have Perl installed in order to build STAF Perl support for 
that Perl version.  Note you have to set environment variables like 
PERL_V518_ROOT to where you installed Perl 5.18.  For example:

 export PERL_V518_ROOT=/opt/ActivePerl-5.18

See section "Building STAF Perl Support" in the STAF Developer's Guide at 
http://staf.sourceforge.net/current/stafdg.html#Header_buildPerl for more 
information.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   Girija Brahme <gir...@gm...>
To:     Sharon Lucas/Austin/IBM@IBMUS
Cc:     sta...@li...
Date:   12/30/2016 11:58 AM
Subject:        Re: [staf-users] Error while loading STAF module




Thank  you Sharon Lucas. Really appreciate your response and right now I 
badly need some guideline for this issue.
When the bundle downloaded for staf,  
http://prdownloads.sourceforge.net/staf/STAF3425-linux-amd64.tar.gz?download
I am only seeing .so file. in /usr/local/staf/lib/perl518. Did I missed 
something ?

I have installed perl myself to version 5.18.4. I had to do this as latest 
active perl available is much higher than supported .so for STAF. That 
might be the problem?

At this point I am attempting to build staf from source. I could build 
staf core successfully. Now trying to build perl support.
Using active perl is a mandatory even building from source?

Thanks,
Girija


On Fri, Dec 30, 2016 at 11:18 PM, Sharon Lucas <lu...@us...> wrote:
Hi Girija,

Did you follow the instructions in section "3.0 Installation" in the STAF 
Perl User's Guide at 
http://staf.sourceforge.net/current/STAFPerl.htm#Header_Installto install 
and configure STAF Perl support for Perl 5.18?

In order to have your Perl script find the specified module, you may need 
to set environment variable PERLLIB to the directory containing the STAF 
Perl modules (PLSTAF.pm, STAFMon.pm, STAFLog.pm), e.g. /usr/local/staf/bin 
for Linux. Also, set PERLLIB to the directory containing the PLSTAF 
library file (libPLSTAF.so on Linux) for Perl 5.18. For example: 

export PERLLIB=/usr/local/staf/bin:/usr/local/staf/lib/perl518

Since you are getting the following error message, it would appear that 
the PERLLIB environment variable does not contain /usr/local/staf/bin 
(which contains the PLSTAF module):

Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module) 
(@INC contains: /usr/local/staf/lib/perl518/ 
/usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi 
/usr/lib/perl5/site_perl/5.18.4 
/usr/lib/perl5/5.18.4/x86_64-linux-thread-multi /usr/lib/perl5/5.18.4 .) 
at test.plline 1.

Are you using ActivePerl 5.18 ?  Or are you trying to use perl 5.18 
provided by the operating system.  Often it is easier to use ActivePerl 
with STAF so you may want to try that.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:        Girija Brahme <gir...@gm...>
To:        sta...@li...
Date:        12/28/2016 01:10 AM
Subject:        [staf-users] Error while loading STAF module




I am trying to setup staf on centos 7. I have installed perl 18 
multithreaded. 
I am new perl and so to staf. Using STAF3425-linux-amd64.tar.gz to install 
staf.

I am definitely making some mistake in setting it up.
Tried to debug but couldn't pin the mistake. Need help from to figure out 
what is
going wrong. Here are details
$perl -v

This is perl 5, version 18, subversion 4 (v5.18.4) built for 
x86_64-linux-thread-multi

Copyright 1987-2013, Larry Wall

Perl may be copied only under the terms of either the Artistic License or 
the
GNU General Public License, which may be found in the Perl 5 source kit.

Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl".  If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.



$/usr/local/staf/bin/staf local misc list properties
Response
--------
version     : 3.4.25
platform    : linux-amd64
architecture: 64-bit
installer   : STAFInst
file        : STAF3425-linux-amd64.tar
osname      : Linux
osversion   : 2.6.18-406+
osarch      : amd64


$cat test.pl
use PLSTAF;


$perl test.pl
Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module) 
(@INC contains: /usr/local/staf/lib/perl518/ 
/usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi 
/usr/lib/perl5/site_perl/5.18.4 
/usr/lib/perl5/5.18.4/x86_64-linux-thread-multi /usr/lib/perl5/5.18.4 .) 
at test.plline 1.
BEGIN failed--compilation aborted at test.plline 1.

And when I attempt to run from framework which uses staf, I am hitting 
following error-
/usr/bin/perl: symbol lookup error: /usr/local/staf/lib/libPLSTAF.so: 
undefined symbol: Perl_Tstack_sp_ptr

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users



------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users

Thank  you Sharon Lucas. Really appreciate your response and right now I
badly need some guideline for this issue.
When the bundle downloaded for staf,
http://prdownloads.sourceforge.net/staf/STAF3425-linux-amd64.tar.gz?download
I am only seeing .so file. in /usr/local/staf/lib/perl518. Did I missed
something ?

I have installed perl myself to version 5.18.4. I had to do this as latest
active perl available is much higher than supported .so for STAF. That
might be the problem?

At this point I am attempting to build staf from source. I could build staf
core successfully. Now trying to build perl support.
Using active perl is a mandatory even building from source?

Thanks,
Girija


On Fri, Dec 30, 2016 at 11:18 PM, Sharon Lucas <lu...@us...> wrote:

> Hi Girija,
>
> Did you follow the instructions in section "3.0 Installation" in the STAF
> Perl User's Guide at http://staf.sourceforge.net/
> current/STAFPerl.htm#Header_Installto install and configure STAF Perl
> support for Perl 5.18?
>
> In order to have your Perl script find the specified module, you may need
> to set environment variable PERLLIB to the directory containing the STAF
> Perl modules (PLSTAF.pm, STAFMon.pm, STAFLog.pm), e.g. /usr/local/staf/bin
> for Linux. Also, set PERLLIB to the directory containing the PLSTAF library
> file (libPLSTAF.so on Linux) for Perl 5.18. For example:
>
> export PERLLIB=/usr/local/staf/bin:/usr/local/staf/lib/perl518
>
> Since you are getting the following error message, it would appear that
> the PERLLIB environment variable does not contain /usr/local/staf/bin
> (which contains the PLSTAF module):
>
> Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module)
> (@INC contains: /usr/local/staf/lib/perl518/ /usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi
> /usr/lib/perl5/site_perl/5.18.4 /usr/lib/perl5/5.18.4/x86_64-linux-thread-multi
> /usr/lib/perl5/5.18.4 .) at *test.pl* <http://test.pl/>line 1.
>
> Are you using ActivePerl 5.18 ?  Or are you trying to use perl 5.18
> provided by the operating system.  Often it is easier to use ActivePerl
> with STAF so you may want to try that.
>
> --------------------------------------------------------------
> Sharon Lucas
> IBM Austin,   lu...@us...
> (512) 286-7313 or Tieline 363-7313
>
>
>
>
> From:        Girija Brahme <gir...@gm...>
> To:        sta...@li...
> Date:        12/28/2016 01:10 AM
> Subject:        [staf-users] Error while loading STAF module
> ------------------------------
>
>
>
> I am trying to setup staf on centos 7. I have installed perl 18
> multithreaded.
> I am new perl and so to staf. Using STAF3425-linux-amd64.tar.gz to
> install staf.
>
> I am definitely making some mistake in setting it up.
> Tried to debug but couldn't pin the mistake. Need help from to figure out
> what is
> going wrong. Here are details
> $perl -v
>
> This is perl 5, version 18, subversion 4 (v5.18.4) built for
> x86_64-linux-thread-multi
>
> Copyright 1987-2013, Larry Wall
>
> Perl may be copied only under the terms of either the Artistic License or
> the
> GNU General Public License, which may be found in the Perl 5 source kit.
>
> Complete documentation for Perl, including FAQ lists, should be found on
> this system using "man perl" or "perldoc perl".  If you have access to the
> Internet, point your browser at *http://www.perl.org/*
> <http://www.perl.org/>, the Perl Home Page.
>
>
>
> $/usr/local/staf/bin/staf local misc list properties
> Response
> --------
> version     : 3.4.25
> platform    : linux-amd64
> architecture: 64-bit
> installer   : STAFInst
> file        : STAF3425-linux-amd64.tar
> osname      : Linux
> osversion   : 2.6.18-406+
> osarch      : amd64
>
>
> $cat *test.pl* <http://test.pl/>
> use PLSTAF;
>
>
> $perl *test.pl* <http://test.pl/>
> Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module)
> (@INC contains: /usr/local/staf/lib/perl518/ /usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi
> /usr/lib/perl5/site_perl/5.18.4 /usr/lib/perl5/5.18.4/x86_64-linux-thread-multi
> /usr/lib/perl5/5.18.4 .) at *test.pl* <http://test.pl/>line 1.
> BEGIN failed--compilation aborted at *test.pl* <http://test.pl/>line 1.
>
> And when I attempt to run from framework which uses staf, I am hitting
> following error-
> /usr/bin/perl: symbol lookup error: /usr/local/staf/lib/libPLSTAF.so:
> undefined symbol: Perl_Tstack_sp_ptr
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot______
> _________________________________________
> staf-users mailing list
> sta...@li...
> https://lists.sourceforge.net/lists/listinfo/staf-users
>
>
>
>

Hi Girija,

Did you follow the instructions in section "3.0 Installation" in the STAF 
Perl User's Guide at 
http://staf.sourceforge.net/current/STAFPerl.htm#Header_Install to install 
and configure STAF Perl support for Perl 5.18?

In order to have your Perl script find the specified module, you may need 
to set environment variable PERLLIB to the directory containing the STAF 
Perl modules (PLSTAF.pm, STAFMon.pm, STAFLog.pm), e.g. /usr/local/staf/bin 
for Linux. Also, set PERLLIB to the directory containing the PLSTAF 
library file (libPLSTAF.so on Linux) for Perl 5.18. For example: 

export PERLLIB=/usr/local/staf/bin:/usr/local/staf/lib/perl518

Since you are getting the following error message, it would appear that 
the PERLLIB environment variable does not contain /usr/local/staf/bin 
(which contains the PLSTAF module):

Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module) 
(@INC contains: /usr/local/staf/lib/perl518/ 
/usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi 
/usr/lib/perl5/site_perl/5.18.4 
/usr/lib/perl5/5.18.4/x86_64-linux-thread-multi /usr/lib/perl5/5.18.4 .) 
at test.pl line 1.

Are you using ActivePerl 5.18 ?  Or are you trying to use perl 5.18 
provided by the operating system.  Often it is easier to use ActivePerl 
with STAF so you may want to try that.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   Girija Brahme <gir...@gm...>
To:     sta...@li...
Date:   12/28/2016 01:10 AM
Subject:        [staf-users] Error while loading STAF module



I am trying to setup staf on centos 7. I have installed perl 18 
multithreaded. 
I am new perl and so to staf. Using STAF3425-linux-amd64.tar.gz to install 
staf.

I am definitely making some mistake in setting it up.
Tried to debug but couldn't pin the mistake. Need help from to figure out 
what is
going wrong. Here are details
$perl -v

This is perl 5, version 18, subversion 4 (v5.18.4) built for 
x86_64-linux-thread-multi

Copyright 1987-2013, Larry Wall

Perl may be copied only under the terms of either the Artistic License or 
the
GNU General Public License, which may be found in the Perl 5 source kit.

Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl".  If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.



$/usr/local/staf/bin/staf local misc list properties
Response
--------
version     : 3.4.25
platform    : linux-amd64
architecture: 64-bit
installer   : STAFInst
file        : STAF3425-linux-amd64.tar
osname      : Linux
osversion   : 2.6.18-406+
osarch      : amd64


$cat test.pl
use PLSTAF;


$perl test.pl
Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module) 
(@INC contains: /usr/local/staf/lib/perl518/ 
/usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi 
/usr/lib/perl5/site_perl/5.18.4 
/usr/lib/perl5/5.18.4/x86_64-linux-thread-multi /usr/lib/perl5/5.18.4 .) 
at test.pl line 1.
BEGIN failed--compilation aborted at test.pl line 1.

And when I attempt to run from framework which uses staf, I am hitting 
following error-
/usr/bin/perl: symbol lookup error: /usr/local/staf/lib/libPLSTAF.so: 
undefined symbol: Perl_Tstack_sp_ptr

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users

I am trying to setup staf on centos 7. I have installed perl 18
multithreaded.
I am new perl and so to staf. Using STAF3425-linux-amd64.tar.gz to install
staf.

I am definitely making some mistake in setting it up.
Tried to debug but couldn't pin the mistake. Need help from to figure out
what is
going wrong. Here are details
$perl -v

This is perl 5, version 18, subversion 4 (v5.18.4) built for
x86_64-linux-thread-multi

Copyright 1987-2013, Larry Wall

Perl may be copied only under the terms of either the Artistic License or
the
GNU General Public License, which may be found in the Perl 5 source kit.

Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl".  If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.



$/usr/local/staf/bin/staf local misc list properties
Response
--------
version     : 3.4.25
platform    : linux-amd64
architecture: 64-bit
installer   : STAFInst
file        : STAF3425-linux-amd64.tar
osname      : Linux
osversion   : 2.6.18-406+
osarch      : amd64


$cat test.pl
use PLSTAF;


$perl test.pl
Can't locate PLSTAF.pm in @INC (you may need to install the PLSTAF module)
(@INC contains: /usr/local/staf/lib/perl518/
/usr/lib/perl5/site_perl/5.18.4/x86_64-linux-thread-multi
/usr/lib/perl5/site_perl/5.18.4
/usr/lib/perl5/5.18.4/x86_64-linux-thread-multi /usr/lib/perl5/5.18.4 .) at
test.pl line 1.
BEGIN failed--compilation aborted at test.pl line 1.

And when I attempt to run from framework which uses staf, I am hitting
following error-
/usr/bin/perl: symbol lookup error: /usr/local/staf/lib/libPLSTAF.so:
undefined symbol: Perl_Tstack_sp_ptr

STAF is returning message "Error starting the process."  so it could not 
even start the process for some reason.  This can be caused by reaching 
some OS limits, such as reaching the OS limit of maximum user processes, 
hit the open file handle limit, or not enough memory available to make the 
process.  See the following posting in the STAF Discussion forum:
- https://sourceforge.net/p/staf/discussion/104046/thread/eb304825/ 

Also, in general when debugging a problem starting a process, you should 
return stdout and stderr when running the  "esxcfg-vmknic -D Storage-21" 
command to see if it provides more information about the problem.  Though 
in this case, because STAF couldn't even start the process, I doubt it 
will return additional information.  For example:

STAF <xx.xx.xx.xx> PROCESS START SHELL COMMAND "esxcfg-vmknic -D 
Storage-21" RETURNSTDOUT STDERRTOSTDOUT WAIT

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   "Md Moniruzzaman" <md....@nf...>
To:     <sta...@li...>
Date:   12/14/2016 09:32 AM
Subject:        [staf-users] Error submitting request, RC: 10



Hi all,
I am trying to execute an ESXi CLI command in my remote Hypervisor which 
is a ESXi 6.0 U2 from my VM (SUSE Linux) machine. When I execute the below 
command. 
I get this error message.LUIS G. DELOSSANTOS 
 
staf <xx.xx.xx.xx> process start wait shell command "esxcfg-vmknic -D 
Storage-21”
Additional information: Error starting the process.
Required STAF operation failed
 
I have got some information from this URL 
https://www.mail-archive.com/sta...@li.../msg01009.html
 
However, it doesn’t help me at all.
 
Waiting the reply 
 
Best Regards 
 
Md Moniruzzaman,VTSP 
Nfina Technologies, Inc.
820 University Blvd. suite 4E
Mobile, AL 36609
Phone:(251) 243-0043 Ext:1008
Fax: (251) 316-3884
www.nfinausa.com
 

 
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users

Hi all,

I am trying to execute an ESXi CLI command in my remote Hypervisor which 

is a ESXi 6.0 U2 from my VM (SUSE Linux) machine. When I execute the below
command. 

I get this error message.

 

staf <xx.xx.xx.xx> process start wait shell command "esxcfg-vmknic -D
Storage-21"

Additional information: Error starting the process.

Required STAF operation failed

 

I have got some information from this URL 

https://www.mail-archive.com/sta...@li.../msg01009.html

 

However, it doesn't help me at all.

 

Waiting the reply 

 

Best Regards 

 

Md Moniruzzaman,VTSP 

Nfina Technologies, Inc.

820 University Blvd. suite 4E

Mobile, AL 36609

Phone:(251) 243-0043 Ext:1008

Fax: (251) 316-3884

 <http://www.nfinausa.com/> www.nfinausa.com

 



 

Hello,

Can an automation client (in public network, not on softlayer) communicate
with a server on softlayer through STAF?

The softlayer server access will be achieved by using SSH, port forwarding
and Putty.  In order to connect to the server on softlayer, I will firstly
ssh into a jumphost then port forward to the server on softlayer.  How
should I configure to enable my automation client to be able to communicate
with the server on softlayer through STAF through port forwarding by the
jumphost server?  Anyone knows if it's do-able?  Thanks a lot!


Regards,
Qinghua Feng
---------------------------------------------------------------------------------------------------------------------------

IBM Commerce / IBM China Development Lab / Email: fe...@cn... / Tel:
(8610) 82453186 / Tieline: (*8)690-53186
Diamond Bldg., No.19 Zhongguancun Software Park, Dongbeiwang West Road
No.8, ShangDi, Haidian District, Beijing 100193, PRC

Hi,
The process you are running via your STAX job most likely completed within 
a second, however, the STAX job was not notified that the process 
completed, most likely due to a DNS problem with either the STAX service 
machine or the machine where the process was executed (e.g. machine 
172.18.245.57 that executed the process is unable to communicate the STAF 
process completion message to the STAX service machine and so the STAX 
service machine never knows that the process completed).  This issue and 
suggestions on how to resolve it is talked about in the STAF/STAX FAQ  at 
http://staf.sourceforge.net/current/STAFFAQ.htm#d0e2201:

4.1.2.
Why is STAX still showing a process as running, even though it has 
completed? 

If you are running a STAX Job, and it shows that a process is still 
running, even though the process has actually completed, this is likely a 
DNS problem with either the STAX service machine or the machine where the 
process was executed (where the machine that executed the process is 
unable to find the STAX service machine in order to deliver the process 
completion message). 
Refer to "Why can't my STAF machines communicate?" to resolve this 
problem. 

And, if you search the STAF Discussion forums and staf-users mailing list, 
you can find answers to your question.  For example, also see  
https://sourceforge.net/p/staf/discussion/104046/thread/be36a62f/?limit=25#1744 
and 
https://sourceforge.net/p/staf/discussion/104046/thread/9b4b7ac4/?limit=25#eee3
--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   sky yadav <sun...@gm...>
To:     Sharon Lucas/Austin/IBM@IBMUS
Date:   08/09/2016 12:55 PM
Subject:        Re: [staf-users] Need Help for STAF



Hi Lucas,

Thanks for your continuous support and help. Now i can run my job over 
network.
But the job which i am running it just a perl file where i am printing 
some text and when ever i trigger this job it keeps in running state.
where if I run same job locally it gets completed in a sec.

Below are the script, please let me know if you need more info, Thanks.

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE stax SYSTEM "stax.dtd">

-<stax>

<defaultcall function="main"/>


-<function name="main">


-<sequence>


-<process>

<location>'172.18.245.57'</location>

<command>'C:/perl/bin/perl c:/script.pl'</command>

<stderr mode="'stdout'"/>

<returnstdout/>

</process>

<message log="1">STAXResult</message>

</sequence>

</function>

</stax>


Regards,
Suneel

On Tue, Aug 9, 2016 at 10:57 PM, Sharon Lucas <lu...@us...> wrote:
Hi,
Now that you have added trust level 5 for local://local, you are getting a 
different trust error.  You are no longer getting a trust error trying to 
submit the STAX EXECUTE request to the STAX service machine.  But you are 
getting a trust error when the STAX service attempts to submit a GET FILE 
request to the FS service on machine 172.18.245.57 to get file 
C:\STAF\suneel.xml from machine 172.18.245.57.  The error message says 
that machine mtvttovcd475 is not giving machine 172.16.79.11 trust level 4 
or higher.  So, in the STAF.cfg file on machine mtvttovcd475, you need to 
give trust level 4 or higher to machine 172.16.79.11.  For example, add:

trust level 5 machine 172.16.79.11

Also, whenever you modify the STAF.cfg file on a machine, you must restart 
STAFProc for those changes to be picked up.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:        sky yadav <sun...@gm...>
To:        sta...@li...
Date:        08/09/2016 12:09 PM
Subject:        [staf-users] Need Help for STAF



Hi,

I am trying to run a STAX job over network as you explained over mail I 
have declared the default trust level to 5 but still getting the below 
error.


RC: 25 (Insufficient trust level)
Additional info
---------------
{
  Job ID       : 2
  Error Message: Error getting XML file C:\STAF\suneel.xml from machine 
172.18.245.57

Trust level 4 required for the FS service's GET FILE request
Requester has trust level 3 on machine mtvttovcd475
Requesting machine: ssl://172.16.79.11(ssl://172.16.79.11)
Requesting user   : none://anonymous
}

STAF local STAX EXECUTE HOLD FILE :18:C:\STAF\suneel.xml MACHINE 
:13:172.18.245.57 JOBNAME :1:9 LOGTCNUMSTARTS Enabled.

Even i have declared default and machine level trust in STAX local and 
STAF network machine but couldn't able to run a job over network.

Any help would be appreciated.



Thanks & Regards,

Suneel Yadava.

Mob-7829479839

------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and 
traffic
patterns at an interface-level. Reveals which users, apps, and protocols 
are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. http://sdm.link/zohodev2dev
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users






-- 
Thanks & Regards

Suneel Yadava.

Mob-7829479839

Hi,
Now that you have added trust level 5 for local://local, you are getting a 
different trust error.  You are no longer getting a trust error trying to 
submit the STAX EXECUTE request to the STAX service machine.  But you are 
getting a trust error when the STAX service attempts to submit a GET FILE 
request to the FS service on machine 172.18.245.57 to get file 
C:\STAF\suneel.xml from machine 172.18.245.57.  The error message says 
that machine mtvttovcd475 is not giving machine 172.16.79.11 trust level 4 
or higher.  So, in the STAF.cfg file on machine mtvttovcd475, you need to 
give trust level 4 or higher to machine 172.16.79.11.  For example, add:

trust level 5 machine 172.16.79.11

Also, whenever you modify the STAF.cfg file on a machine, you must restart 
STAFProc for those changes to be picked up.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   sky yadav <sun...@gm...>
To:     sta...@li...
Date:   08/09/2016 12:09 PM
Subject:        [staf-users] Need Help for STAF



Hi,

I am trying to run a STAX job over network as you explained over mail I 
have declared the default trust level to 5 but still getting the below 
error.


RC: 25 (Insufficient trust level)
Additional info
---------------
{
  Job ID       : 2
  Error Message: Error getting XML file C:\STAF\suneel.xml from machine 
172.18.245.57

Trust level 4 required for the FS service's GET FILE request
Requester has trust level 3 on machine mtvttovcd475
Requesting machine: ssl://172.16.79.11 (ssl://172.16.79.11)
Requesting user   : none://anonymous
}

STAF local STAX EXECUTE HOLD FILE :18:C:\STAF\suneel.xml MACHINE 
:13:172.18.245.57 JOBNAME :1:9 LOGTCNUMSTARTS Enabled.

Even i have declared default and machine level trust in STAX local and 
STAF network machine but couldn't able to run a job over network.

Any help would be appreciated.



Thanks & Regards,

Suneel Yadava.

Mob-7829479839

------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and 
traffic
patterns at an interface-level. Reveals which users, apps, and protocols 
are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. http://sdm.link/zohodev2dev
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users

Hi,

I am trying to run a STAX job over network as you explained over mail I
have declared the default trust level to 5 but still getting the below
error.


*RC: 25 (Insufficient trust level)*
*Additional info*
*---------------*
*{*
*  Job ID       : 2*
*  Error Message: Error getting XML file C:\STAF\suneel.xml from machine
172.18.245.57*

*Trust level 4 required for the FS service's GET FILE request*
*Requester has trust level 3 on machine mtvttovcd475*
*Requesting machine: ssl://172.16.79.11 <http://172.16.79.11>
(ssl://172.16.79.11 <http://172.16.79.11>)*
*Requesting user   : none://anonymous*
*}*

*STAF local STAX EXECUTE HOLD FILE :18:C:\STAF\suneel.xml MACHINE
:13:172.18.245.57 JOBNAME :1:9 LOGTCNUMSTARTS Enabled.*

*Even i have declared default and machine level trust in STAX local and
STAF network machine but couldn't able to run a job over network.*

*Any help would be appreciated.*



*Thanks & Regards,*

Suneel Yadava.

Mob-7829479839

Hi,

I think that depends on what you have in mind.
You can certainly use most STAF services independently of the application you have.
STAF does not care about the kind of processes you start – so whether you have native apps or Java or any interpreted stuff does not really matter.
AFAIU implementing STAF services based on C++ would require using native code (not .net), but most likely you’ll already find the services that you need
available from STAF directly.

HTH
  Jürgen
—
Jürgen Kindler

From: sky yadav <sun...@gm...>
Date: Wednesday 6 July 2016 22:16
To: "sta...@li..." <sta...@li...>
Subject: [staf-users] Need info for implementing STAF for .net application

Hi Team,

It would be very great if anyone can tell if we can use STAF for .net and c++ desktop application.
And how we can start the same.

Anyhelp would be great.


Thanks & Regards,

Suneel Yadava.

Mob-7829479839

Hi Team,

It would be very great if anyone can tell if we can use STAF for .net and
c++ desktop application.
And how we can start the same.

Anyhelp would be great.


Thanks & Regards,

Suneel Yadava.

Mob-7829479839

No.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   Veenit J Vora <vee...@ca...>
To:     "sta...@li..." 
<sta...@li...>, Sharon Lucas/Austin/IBM@IBMUS
Date:   04/11/2016 01:40 AM
Subject:        RE: Reporting services compatible with STAF



Hello Sharon,
 
Thanks for the reply.
 
By “reporting capabilities” I was referring to something analogous to 
Crystal Reports. Does STAF integrate with any such software wherein we 
would be able to see test case results in the format of a report.
 
Regards,
Veenit
 
This message contains information that may be privileged or confidential 
and is the property of the Capgemini Group. It is intended only for the 
person to whom it is addressed. If you are not the intended recipient, you 
are not authorized to read, print, retain, copy, disseminate, distribute, 
or use this message or any part thereof. If you receive this message in 
error, please notify the sender immediately and delete all copies of this 
message.

Hello Sharon,

Thanks for the reply.

By "reporting capabilities" I was referring to something analogous to Crystal Reports. Does STAF integrate with any such software wherein we would be able to see test case results in the format of a report.

Regards,
Veenit

This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

I'm not sure what kind of reporting capabilities you mean.  There isn't a 
STAF reporting service, though you could write your own STAF service 
(using the APIs that STAF provides) to do whatever you want.  STAF 
provides a LOG service which allows a test case to easily and flexibly 
manage information that needs to be logged (see section 8.9 Log Service in 
the STAF User's Guide at 
http://staf.sourceforge.net/current/STAFUG.htm#HDRLOGSRV for more 
information on it). 

If you use the STAX service, it provides a monitoring application which 
allows you to interact with and monitor the progress of your jobs. See the 
STAX User's Guide at http://staf.sourceforge.net/current/STAX/staxug.html 
for more information.

See the STAF/STAX documentation web page at 
http://staf.sourceforge.net/docs.php for a complete list of available 
documentation.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   Veenit J Vora <vee...@ca...>
To:     "sta...@li..." 
<sta...@li...>
Date:   04/09/2016 01:29 PM
Subject:        [staf-users] Reporting services compatible with STAF



Hello users, experts,
 
I am new to STAF, hence have a basic question on the same.
 
Kindly tell me what Reporting Services or Reporting Capabilities does STAF 
have. Please point me to resources that can help me in this area.
 
Thanking everybody in advance.
 
Thanks and Regards,
_______________________________________________________________________
Veenit J Vora
Technical Architect | Product and Engineering Services
 
Capgemini "India" | Gigaplex, Airoli
Tel.: +91 22 66930500 Ext: 20391 – Mob.: +91 98677 55592 
www.capgemini.com
 
Unit No 301, 401, Gigaplex, Plot No. IT5, MIDC Knowledge Corridor, Airoli, 
Navi Mumbai, 400708, Maharashtra, India.
People matter, results count.
_______________________________________________________________________
Connect with Capgemini:

 
 
P Please consider the environment and do not print this email unless 
absolutely necessary.
Capgemini encourages environmental awareness.
 
This message contains information that may be privileged or confidential 
and is the property of the Capgemini Group. It is intended only for the 
person to whom it is addressed. If you are not the intended recipient, you 
are not authorized to read, print, retain, copy, disseminate, distribute, 
or use this message or any part thereof. If you receive this message in 
error, please notify the sender immediately and delete all copies of this 
message.
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications 
Manager
Applications Manager provides deep performance insights into multiple 
tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial! http://pubads.g.doubleclick.net/
gampad/clk?id=1444514301&iu=/ca-pub-7940484522588532_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users

Hello users, experts,

I am new to STAF, hence have a basic question on the same.

Kindly tell me what Reporting Services or Reporting Capabilities does STAF have. Please point me to resources that can help me in this area.

Thanking everybody in advance.

Thanks and Regards,
_______________________________________________________________________
[Email_CBE.gif]Veenit J Vora
Technical Architect | Product and Engineering Services

Capgemini "India" | Gigaplex, Airoli
Tel.: +91 22 66930500 Ext: 20391 - Mob.: +91 98677 55592
www.capgemini.com<http://www.capgemini.com/>

Unit No 301, 401, Gigaplex, Plot No. IT5, MIDC Knowledge Corridor, Airoli, Navi Mumbai, 400708, Maharashtra, India.
People matter, results count.
_______________________________________________________________________
Connect with Capgemini:
[Picto_Blog]<http://www.capgemini.com/insights-and-resources/blogs>[Picto_Twitter]<http://www.twitter.com/capgemini>[Picto_Facebook]<http://www.facebook.com/capgemini>[Picto_LinkedIn]<http://www.linkedin.com/company/capgemini>[Picto_Slideshare]<http://www.slideshare.net/capgemini>[Picto_YouTube]<http://www.youtube.com/capgeminimedia>


P Please consider the environment and do not print this email unless absolutely necessary.
Capgemini encourages environmental awareness.

This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

You can build the sample C++ STAF Device service (STAFDeviceService.dll) 
yourself.  See the STAF Service Developer Guide at 
http://staf.sourceforge.net/current/stafsdg.html, particularly section 6.3 
Example: Building a Sample C++ STAF Service, for more information on how 
to build the sample C++ Device service.

--------------------------------------------------------------
Sharon Lucas
IBM Austin,   lu...@us...
(512) 286-7313 or Tieline 363-7313




From:   Manmath Mohanty <man...@pa...>
To:     sta...@li...
Date:   01/05/2016 10:28 AM
Subject:        [staf-users] .dll file needed



Hello 

                  I am building a service in c++, where should i get 
STAFDeviceService.DLL file?

This message contains confidential information and is intended only for 
the individual(s) named. If you are not the intended recipient, you are 
notified that disclosing, copying, distributing or taking any action in 
reliance on the contents of this mail and attached file/s is strictly 
prohibited. Please notify the sender immediately and delete this e-mail 
from your system. E-mail transmission cannot be guaranteed to be secured 
or error-free as information could be intercepted, corrupted, lost, 
destroyed, arrive late or incomplete, or contain viruses. The sender 
therefore does not accept liability for any errors or omissions in the 
contents of this message, which arise as a result of e-mail transmission.
------------------------------------------------------------------------------
_______________________________________________
staf-users mailing list
sta...@li...
https://lists.sourceforge.net/lists/listinfo/staf-users