webadmin-list Mailing List for Webmin (Page 3)

If possible, it would be useful for me to take a look at your full DHCPd leases file. If that's OK, you can send it to me off-list at jca...@we...  

On 14/Jun/2023 05:42 Buchanan, Ted <tbu...@vi...> wrote ..   Just for additional information, I have 2 other DHCP servers serving other specific parts of our network running the same Oracle 8.8, Webmin 2.021, ISC DHCP 4.3.6 which work fine.  Granted they have far fewer devices to support.  On Wed, Jun 14, 2023 at 1:15 AM Jamie Cameron <jca...@we...> wrote:  

Thanks for those! Does the 159.218.43.117 lease appear when you click on List Active Leases on the main page of the DHCP server module? There's also a button on that page to show expired leases as well..  

On 13/Jun/2023 04:59 Buchanan, Ted <tbu...@vi...> wrote ..    Hi Jamie, thank you for responding.  I have copied from the terminal 4 leases from the /var/lib/dhcp/dhcpd.leases file -- the first 2 leases (159.218.146.157 and 159.218.147.8) were taken from non-contiguous sections of the lease file and are visible when in Webmin I click on the 159.218.144.0 network and then click the List leases button.  The next 2 leases (159.218.43.117 and 159.218.42.219) were copied from the same dhcpd.leases file and are not visible in the Webmin lease listing.  Below that I have copied the appropriate sections from the /etc/dhcp/dhcpd.conf file.  I can not say exactly when this problem made itself known or what change may have triggered it.  Thank you for any direction you can give.  lease 159.218.146.157 {  starts 2 2023/06/13 10:56:13;  ends 2 2023/06/13 11:56:13;  cltt 2 2023/06/13 10:56:13;  binding state active;  next binding state free;  rewind binding state free;  hardware ethe
 rnet 04:27:28:81:76:ba;  uid "\001\004'(\201v\272";  set vendor-class-identifier = "MSFT 5.0 XBOX";  client-hostname "XBOX";}lease 159.218.147.8 {   starts 2 2023/06/13 10:58:30;   ends 2 2023/06/13 11:58:30;   cltt 2 2023/06/13 10:58:30;   binding state active;   next binding state free;   rewind binding state free;   hardware ethernet 00:7c:2d:87:e1:3d;   uid "\001\000|-\207\341=";   client-hostname "Samsung"; }lease 159.218.43.117 {  starts 6 2023/04/08 21:58:43;  ends 6 2023/04/29 21:58:43;  tstp 6 2023/04/29 21:58:43;  cltt 4 2023/04/13 20:06:50;  binding state free;  hardware ethernet 50:9a:4c:53:8e:5f;  uid "\001P\232LS\216_";  set vendor-class-identifier = "MSFT 5.0";}lease 159.218.42.219 {  starts 1 2022/10/03 10:14:07;  ends 1 2022/10/03 16:14:15;  tstp 1 2022/10/03 16:14:15;  cltt 1 2022/10/03 10:14:07;  binding state free;  hardware ethernet 6c:2b:59:d2:22:2c;  uid "\001l+Y\322\",";}=========================
 =================# #### vlan 42 (WAB)subnet 159.218.42.0 netmask 255.255.255.0 {        authoritativ e;        option broadcast-address 159.218.42.255;        option subnet-mask 255.255.255.0;        option routers 159.218.42.254;        range 159.218.42.138 159.218.42.169;        range 159.218.42.199 159.218.42.230;        }# #### vlan 43 (Business Students)subnet 159.218.43.0 netmask 255.255.255.0 {        option broadcast-address 159.218.43.255;        option subnet-mask 255.255.255.0;        option routers 159.218.43.254;        max-lease-time 1814400;        default-lease-time 1814400;        range 159.218.43.30 159.218.43.249;        }# #### vlan 144 (VU Streaming)subnet 159.218.144.0 netmask 255.255.248.0 {        option broadcast-address 159.218.144.255;        option subnet-mask 255.255.248.0;        option routers 159.218.144.254;        authoritative;        dynamic-bootp-lease-length 3600;        max-lease-time 3600;        defau
 lt-lease-time 3600;        range 159.218.144.10 159.218.144.246;        range 159.218.145.5 159.218.145.249;        range 159.218.146.5 159.218.146.249;        range 159.218.147.5 159.218.147.249;        range 159.218.148.5 159.218.148.249;        range 159.218.149.5 159.218.149.249;        range 159.218.150.5 159.218.150.249;        range 159.218.151.5 159.218.151.249;         }   On Mon, Jun 12, 2023 at 6:24 PM Jamie Cameron <jca...@we...> wrote:  

Can you send a sample of the dhcpd.leases file that contains the leases that aren't showing up? The issue may be that Webmin isn't parsing the file properly.. 

On 12/Jun/2023 11:05 Buchanan, Ted <tbu...@vi...> wrote ..   I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021 to help with the administration of this server.  Everything used to work/display just fine but suddenly, when trying to list the dynamic leases within a subnet, I get the message, "The DHCPd lease file /var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at the current time."  If I click on the List all active and expired leases button, I get the message "The DHCPd lease file /var/lib/dhcpd/dhcpd.leases does not contain any leases."  Clearly, when I use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the leases exist, new clients receive new IP addresses and existing ones are able to renew successfully.  The leases that _DO_ show up are from wireless subnets or subnets not directly connected to our campus.  I'm not the only one who admin
 isters this server/service so the Webmin module is really helpful and currently missed.  Any suggestions for troubleshooting and correcting this issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees with the current operation.  Thank you. --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...      - Forwarded by the Webmin mailing list at web...@li... To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-list  --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...    - Forwarded by the Webmin mailing list at web...@li... To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-list  --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...   

Just for additional information, I have 2 other DHCP servers serving other
specific parts of our network running the same Oracle 8.8, Webmin 2.021,
ISC DHCP 4.3.6 which work fine.  Granted they have far fewer devices to
support.

On Wed, Jun 14, 2023 at 1:15 AM Jamie Cameron <jca...@we...> wrote:

> Thanks for those! Does the 159.218.43.117 lease appear when you click on
> List Active Leases on the main page of the DHCP server module? There's also
> a button on that page to show expired leases as well..
>
> On 13/Jun/2023 04:59 Buchanan, Ted <tbu...@vi...> wrote ..
>
> Hi Jamie, thank you for responding.  I have copied from the terminal 4
> leases from the /var/lib/dhcp/dhcpd.leases file -- the first 2 leases
> (159.218.146.157 and 159.218.147.8) were taken from non-contiguous sections
> of the lease file and are visible when in Webmin I click on the
> 159.218.144.0 network and then click the List leases button.  The next 2
> leases (159.218.43.117 and 159.218.42.219) were copied from the same
> dhcpd.leases file and are not visible in the Webmin lease listing.  Below
> that I have copied the appropriate sections from the /etc/dhcp/dhcpd.conf
> file.  I can not say exactly when this problem made itself known or what
> change may have triggered it.  Thank you for any direction you can give.
>
> lease 159.218.146.157 {
>   starts 2 2023/06/13 10:56:13;
>   ends 2 2023/06/13 11:56:13;
>   cltt 2 2023/06/13 10:56:13;
>   binding state active;
>   next binding state free;
>   rewind binding state free;
>   hardware ethernet 04:27:28:81:76:ba;
>   uid "\001\004'(\201v\272";
>   set vendor-class-identifier = "MSFT 5.0 XBOX";
>   client-hostname "XBOX";
> }
> lease 159.218.147.8 {
>  starts 2 2023/06/13 10:58:30;
>  ends 2 2023/06/13 11:58:30;
>  cltt 2 2023/06/13 10:58:30;
>  binding state active;
>  next binding state free;
>  rewind binding state free;
>  hardware ethernet 00:7c:2d:87:e1:3d;
>  uid "\001\000|-\207\341=";
>  client-hostname "Samsung";
> }
>
> lease 159.218.43.117 {
>   starts 6 2023/04/08 21:58:43;
>   ends 6 2023/04/29 21:58:43;
>   tstp 6 2023/04/29 21:58:43;
>   cltt 4 2023/04/13 20:06:50;
>   binding state free;
>   hardware ethernet 50:9a:4c:53:8e:5f;
>   uid "\001P\232LS\216_";
>   set vendor-class-identifier = "MSFT 5.0";
> }
> lease 159.218.42.219 {
>   starts 1 2022/10/03 10:14:07;
>   ends 1 2022/10/03 16:14:15;
>   tstp 1 2022/10/03 16:14:15;
>   cltt 1 2022/10/03 10:14:07;
>   binding state free;
>   hardware ethernet 6c:2b:59:d2:22:2c;
>   uid "\001l+Y\322\",";
> }
> ==========================================
> # #### vlan 42 (WAB)
> subnet 159.218.42.0 netmask 255.255.255.0 {
>         authoritativ e;
>         option broadcast-address 159.218.42.255;
>         option subnet-mask 255.255.255.0;
>         option routers 159.218.42.254;
>         range 159.218.42.138 159.218.42.169;
>         range 159.218.42.199 159.218.42.230;
>         }
> # #### vlan 43 (Business Students)
> subnet 159.218.43.0 netmask 255.255.255.0 {
>         option broadcast-address 159.218.43.255;
>         option subnet-mask 255.255.255.0;
>         option routers 159.218.43.254;
>         max-lease-time 1814400;
>         default-lease-time 1814400;
>         range 159.218.43.30 159.218.43.249;
>         }
> # #### vlan 144 (VU Streaming)
> subnet 159.218.144.0 netmask 255.255.248.0 {
>         option broadcast-address 159.218.144.255;
>         option subnet-mask 255.255.248.0;
>         option routers 159.218.144.254;
>         authoritative;
>         dynamic-bootp-lease-length 3600;
>         max-lease-time 3600;
>         default-lease-time 3600;
>         range 159.218.144.10 159.218.144.246;
>         range 159.218.145.5 159.218.145.249;
>         range 159.218.146.5 159.218.146.249;
>         range 159.218.147.5 159.218.147.249;
>         range 159.218.148.5 159.218.148.249;
>         range 159.218.149.5 159.218.149.249;
>         range 159.218.150.5 159.218.150.249;
>         range 159.218.151.5 159.218.151.249;
>         }
>
> On Mon, Jun 12, 2023 at 6:24 PM Jamie Cameron <jca...@we...
> <http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom>> wrote:
>
>> Can you send a sample of the dhcpd.leases file that contains the leases
>> that aren't showing up? The issue may be that Webmin isn't parsing the file
>> properly..
>>
>> On 12/Jun/2023 11:05 Buchanan, Ted <tbu...@vi...
>> <http://reply_mail.cgi?new=1&to=tbuchanan%40vinu%2Eedu>> wrote ..
>>
>> I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP
>> version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021
>> to help with the administration of this server.  Everything used to
>> work/display just fine but suddenly, when trying to list the dynamic leases
>> within a subnet, I get the message, "*The DHCPd lease file
>> /var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at
>> the current time."  *If I click on the List all active and expired
>> leases button, I get the message "*The DHCPd lease file
>> /var/lib/dhcpd/dhcpd.leases does not contain any leases."*  Clearly,
>> when I use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the
>> leases exist, new clients receive new IP addresses and existing ones are
>> able to renew successfully.  The leases that _DO_ show up are from wireless
>> subnets or subnets not directly connected to our campus.  I'm not the only
>> one who administers this server/service so the Webmin module is really
>> helpful and currently missed.  Any suggestions for troubleshooting and
>> correcting this issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees
>> with the current operation.  Thank you.
>>
>> --
>> Ted Buchanan
>> Senior Systems Administrator - Vincennes University
>> tbu...@vi...
>> <https://us01.z.antigena.com/l/dqUP8cOmul_TMVZ-c9CL53KECB-ktkSzU6E7GaQmZ7q1_NHLLv4ZTeV8IsnrHrzMnDEEC0h9tHVEduNNeXBWbIHDyhRcdRtElIMmRzoFYDIFNp_EwMISYrohLRiFA3HOIGN8Hi6Hwwae~OuP51J5kKF3BmOVOoieCNiSt~j21pCG~GqPQm>
>>
>>
>>
>> -
>> Forwarded by the Webmin mailing list at
>> web...@li...
>> <http://reply_mail.cgi?new=1&to=webadmin%2Dlist%40lists%2Esourceforge%2Enet>
>> To remove yourself from this list, go to
>> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>>
>
>
> --
> Ted Buchanan
> Senior Systems Administrator - Vincennes University
> tbu...@vi... <http://reply_mail.cgi?new=1&to=tbuchanan%40vinu%2Eedu>
>
>
>
> -
> Forwarded by the Webmin mailing list at
> web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>


-- 
Ted Buchanan
Senior Systems Administrator - Vincennes University
tbu...@vi...

No, 159.218.43.117 does not appear on the main page List active leases
button, nor does it appear in the subnet List leases.  When I click on the
List all active and expired leases button, I get "*The DHCPd lease file
/var/lib/dhcpd/dhcpd.leases does not contain any leases."*

On Wed, Jun 14, 2023 at 1:15 AM Jamie Cameron <jca...@we...> wrote:

> Thanks for those! Does the 159.218.43.117 lease appear when you click on
> List Active Leases on the main page of the DHCP server module? There's also
> a button on that page to show expired leases as well..
>
> On 13/Jun/2023 04:59 Buchanan, Ted <tbu...@vi...> wrote ..
>
> Hi Jamie, thank you for responding.  I have copied from the terminal 4
> leases from the /var/lib/dhcp/dhcpd.leases file -- the first 2 leases
> (159.218.146.157 and 159.218.147.8) were taken from non-contiguous sections
> of the lease file and are visible when in Webmin I click on the
> 159.218.144.0 network and then click the List leases button.  The next 2
> leases (159.218.43.117 and 159.218.42.219) were copied from the same
> dhcpd.leases file and are not visible in the Webmin lease listing.  Below
> that I have copied the appropriate sections from the /etc/dhcp/dhcpd.conf
> file.  I can not say exactly when this problem made itself known or what
> change may have triggered it.  Thank you for any direction you can give.
>
> lease 159.218.146.157 {
>   starts 2 2023/06/13 10:56:13;
>   ends 2 2023/06/13 11:56:13;
>   cltt 2 2023/06/13 10:56:13;
>   binding state active;
>   next binding state free;
>   rewind binding state free;
>   hardware ethernet 04:27:28:81:76:ba;
>   uid "\001\004'(\201v\272";
>   set vendor-class-identifier = "MSFT 5.0 XBOX";
>   client-hostname "XBOX";
> }
> lease 159.218.147.8 {
>  starts 2 2023/06/13 10:58:30;
>  ends 2 2023/06/13 11:58:30;
>  cltt 2 2023/06/13 10:58:30;
>  binding state active;
>  next binding state free;
>  rewind binding state free;
>  hardware ethernet 00:7c:2d:87:e1:3d;
>  uid "\001\000|-\207\341=";
>  client-hostname "Samsung";
> }
>
> lease 159.218.43.117 {
>   starts 6 2023/04/08 21:58:43;
>   ends 6 2023/04/29 21:58:43;
>   tstp 6 2023/04/29 21:58:43;
>   cltt 4 2023/04/13 20:06:50;
>   binding state free;
>   hardware ethernet 50:9a:4c:53:8e:5f;
>   uid "\001P\232LS\216_";
>   set vendor-class-identifier = "MSFT 5.0";
> }
> lease 159.218.42.219 {
>   starts 1 2022/10/03 10:14:07;
>   ends 1 2022/10/03 16:14:15;
>   tstp 1 2022/10/03 16:14:15;
>   cltt 1 2022/10/03 10:14:07;
>   binding state free;
>   hardware ethernet 6c:2b:59:d2:22:2c;
>   uid "\001l+Y\322\",";
> }
> ==========================================
> # #### vlan 42 (WAB)
> subnet 159.218.42.0 netmask 255.255.255.0 {
>         authoritativ e;
>         option broadcast-address 159.218.42.255;
>         option subnet-mask 255.255.255.0;
>         option routers 159.218.42.254;
>         range 159.218.42.138 159.218.42.169;
>         range 159.218.42.199 159.218.42.230;
>         }
> # #### vlan 43 (Business Students)
> subnet 159.218.43.0 netmask 255.255.255.0 {
>         option broadcast-address 159.218.43.255;
>         option subnet-mask 255.255.255.0;
>         option routers 159.218.43.254;
>         max-lease-time 1814400;
>         default-lease-time 1814400;
>         range 159.218.43.30 159.218.43.249;
>         }
> # #### vlan 144 (VU Streaming)
> subnet 159.218.144.0 netmask 255.255.248.0 {
>         option broadcast-address 159.218.144.255;
>         option subnet-mask 255.255.248.0;
>         option routers 159.218.144.254;
>         authoritative;
>         dynamic-bootp-lease-length 3600;
>         max-lease-time 3600;
>         default-lease-time 3600;
>         range 159.218.144.10 159.218.144.246;
>         range 159.218.145.5 159.218.145.249;
>         range 159.218.146.5 159.218.146.249;
>         range 159.218.147.5 159.218.147.249;
>         range 159.218.148.5 159.218.148.249;
>         range 159.218.149.5 159.218.149.249;
>         range 159.218.150.5 159.218.150.249;
>         range 159.218.151.5 159.218.151.249;
>         }
>
> On Mon, Jun 12, 2023 at 6:24 PM Jamie Cameron <jca...@we...
> <http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom>> wrote:
>
>> Can you send a sample of the dhcpd.leases file that contains the leases
>> that aren't showing up? The issue may be that Webmin isn't parsing the file
>> properly..
>>
>> On 12/Jun/2023 11:05 Buchanan, Ted <tbu...@vi...
>> <http://reply_mail.cgi?new=1&to=tbuchanan%40vinu%2Eedu>> wrote ..
>>
>> I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP
>> version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021
>> to help with the administration of this server.  Everything used to
>> work/display just fine but suddenly, when trying to list the dynamic leases
>> within a subnet, I get the message, "*The DHCPd lease file
>> /var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at
>> the current time."  *If I click on the List all active and expired
>> leases button, I get the message "*The DHCPd lease file
>> /var/lib/dhcpd/dhcpd.leases does not contain any leases."*  Clearly,
>> when I use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the
>> leases exist, new clients receive new IP addresses and existing ones are
>> able to renew successfully.  The leases that _DO_ show up are from wireless
>> subnets or subnets not directly connected to our campus.  I'm not the only
>> one who administers this server/service so the Webmin module is really
>> helpful and currently missed.  Any suggestions for troubleshooting and
>> correcting this issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees
>> with the current operation.  Thank you.
>>
>> --
>> Ted Buchanan
>> Senior Systems Administrator - Vincennes University
>> tbu...@vi...
>> <https://us01.z.antigena.com/l/dqUP8cOmul_TMVZ-c9CL53KECB-ktkSzU6E7GaQmZ7q1_NHLLv4ZTeV8IsnrHrzMnDEEC0h9tHVEduNNeXBWbIHDyhRcdRtElIMmRzoFYDIFNp_EwMISYrohLRiFA3HOIGN8Hi6Hwwae~OuP51J5kKF3BmOVOoieCNiSt~j21pCG~GqPQm>
>>
>>
>>
>> -
>> Forwarded by the Webmin mailing list at
>> web...@li...
>> <http://reply_mail.cgi?new=1&to=webadmin%2Dlist%40lists%2Esourceforge%2Enet>
>> To remove yourself from this list, go to
>> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>>
>
>
> --
> Ted Buchanan
> Senior Systems Administrator - Vincennes University
> tbu...@vi... <http://reply_mail.cgi?new=1&to=tbuchanan%40vinu%2Eedu>
>
>
>
> -
> Forwarded by the Webmin mailing list at
> web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>


-- 
Ted Buchanan
Senior Systems Administrator - Vincennes University
tbu...@vi...

Thanks for those! Does the 159.218.43.117 lease appear when you click on List Active Leases on the main page of the DHCP server module? There's also a button on that page to show expired leases as well..  

On 13/Jun/2023 04:59 Buchanan, Ted <tbu...@vi...> wrote ..    Hi Jamie, thank you for responding.  I have copied from the terminal 4 leases from the /var/lib/dhcp/dhcpd.leases file -- the first 2 leases (159.218.146.157 and 159.218.147.8) were taken from non-contiguous sections of the lease file and are visible when in Webmin I click on the 159.218.144.0 network and then click the List leases button.  The next 2 leases (159.218.43.117 and 159.218.42.219) were copied from the same dhcpd.leases file and are not visible in the Webmin lease listing.  Below that I have copied the appropriate sections from the /etc/dhcp/dhcpd.conf file.  I can not say exactly when this problem made itself known or what change may have triggered it.  Thank you for any direction you can give.  lease 159.218.146.157 {  starts 2 2023/06/13 10:56:13;  ends 2 2023/06/13 11:56:13;  cltt 2 2023/06/13 10:56:13;  binding state active;  next binding state free;  rewind binding state free;  hardware ethe
 rnet 04:27:28:81:76:ba;  uid "\001\004'(\201v\272";  set vendor-class-identifier = "MSFT 5.0 XBOX";  client-hostname "XBOX";}lease 159.218.147.8 {   starts 2 2023/06/13 10:58:30;   ends 2 2023/06/13 11:58:30;   cltt 2 2023/06/13 10:58:30;   binding state active;   next binding state free;   rewind binding state free;   hardware ethernet 00:7c:2d:87:e1:3d;   uid "\001\000|-\207\341=";   client-hostname "Samsung"; }lease 159.218.43.117 {  starts 6 2023/04/08 21:58:43;  ends 6 2023/04/29 21:58:43;  tstp 6 2023/04/29 21:58:43;  cltt 4 2023/04/13 20:06:50;  binding state free;  hardware ethernet 50:9a:4c:53:8e:5f;  uid "\001P\232LS\216_";  set vendor-class-identifier = "MSFT 5.0";}lease 159.218.42.219 {  starts 1 2022/10/03 10:14:07;  ends 1 2022/10/03 16:14:15;  tstp 1 2022/10/03 16:14:15;  cltt 1 2022/10/03 10:14:07;  binding state free;  hardware ethernet 6c:2b:59:d2:22:2c;  uid "\001l+Y\322\",";}=========================
 =================# #### vlan 42 (WAB)subnet 159.218.42.0 netmask 255.255.255.0 {        authoritative;        option broadcast-address 159.218.42.255;        option subnet-mask 255.255.255.0;        option routers 159.218.42.254;        range 159.218.42.138 159.218.42.169;        range 159.218.42.199 159.218.42.230;        }# #### vlan 43 (Business Students)subnet 159.218.43.0 netmask 255.255.255.0 {        option broadcast-address 159.218.43.255;        option subnet-mask 255.255.255.0;        option routers 159.218.43.254;        max-lease-time 1814400;        default-lease-time 1814400;        range 159.218.43.30 159.218.43.249;        }# #### vlan 144 (VU Streaming)subnet 159.218.144.0 netmask 255.255.248.0 {        option broadcast-address 159.218.144.255;        option subnet-mask 255.255.248.0;        option routers 159.218.144.254;        authoritative;        dynamic-bootp-lease-length 3600;        max-lease-time 3600;        defaul
 t-lease-time 3600;        range 159.218.144.10 159.218.144.246;        range 159.218.145.5 159.218.145.249;        range 159.218.146.5 159.218.146.249;        range 159.218.147.5 159.218.147.249;        range 159.218.148.5 159.218.148.249;        range 159.218.149.5 159.218.149.249;        range 159.218.150.5 159.218.150.249;        range 159.218.151.5 159.218.151.249;        }   On Mon, Jun 12, 2023 at 6:24 PM Jamie Cameron <jca...@we...> wrote:  

Can you send a sample of the dhcpd.leases file that contains the leases that aren't showing up? The issue may be that Webmin isn't parsing the file properly.. 

On 12/Jun/2023 11:05 Buchanan, Ted <tbu...@vi...> wrote ..   I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021 to help with the administration of this server.  Everything used to work/display just fine but suddenly, when trying to list the dynamic leases within a subnet, I get the message, "The DHCPd lease file /var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at the current time."  If I click on the List all active and expired leases button, I get the message "The DHCPd lease file /var/lib/dhcpd/dhcpd.leases does not contain any leases."  Clearly, when I use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the leases exist, new clients receive new IP addresses and existing ones are able to renew successfully.  The leases that _DO_ show up are from wireless subnets or subnets not directly connected to our campus.  I'm not the only one who admin
 isters this server/service so the Webmin module is really helpful and currently missed.  Any suggestions for troubleshooting and correcting this issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees with the current operation.  Thank you. --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...      - Forwarded by the Webmin mailing list at web...@li... To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-list  --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...   

Hi Jamie, thank you for responding.  I have copied from the terminal 4
leases from the /var/lib/dhcp/dhcpd.leases file -- the first 2 leases
(159.218.146.157 and 159.218.147.8) were taken from non-contiguous sections
of the lease file and are visible when in Webmin I click on the
159.218.144.0 network and then click the List leases button.  The next 2
leases (159.218.43.117 and 159.218.42.219) were copied from the same
dhcpd.leases file and are not visible in the Webmin lease listing.  Below
that I have copied the appropriate sections from the /etc/dhcp/dhcpd.conf
file.  I can not say exactly when this problem made itself known or what
change may have triggered it.  Thank you for any direction you can give.

lease 159.218.146.157 {
  starts 2 2023/06/13 10:56:13;
  ends 2 2023/06/13 11:56:13;
  cltt 2 2023/06/13 10:56:13;
  binding state active;
  next binding state free;
  rewind binding state free;
  hardware ethernet 04:27:28:81:76:ba;
  uid "\001\004'(\201v\272";
  set vendor-class-identifier = "MSFT 5.0 XBOX";
  client-hostname "XBOX";
}
lease 159.218.147.8 {
 starts 2 2023/06/13 10:58:30;
 ends 2 2023/06/13 11:58:30;
 cltt 2 2023/06/13 10:58:30;
 binding state active;
 next binding state free;
 rewind binding state free;
 hardware ethernet 00:7c:2d:87:e1:3d;
 uid "\001\000|-\207\341=";
 client-hostname "Samsung";
}

lease 159.218.43.117 {
  starts 6 2023/04/08 21:58:43;
  ends 6 2023/04/29 21:58:43;
  tstp 6 2023/04/29 21:58:43;
  cltt 4 2023/04/13 20:06:50;
  binding state free;
  hardware ethernet 50:9a:4c:53:8e:5f;
  uid "\001P\232LS\216_";
  set vendor-class-identifier = "MSFT 5.0";
}
lease 159.218.42.219 {
  starts 1 2022/10/03 10:14:07;
  ends 1 2022/10/03 16:14:15;
  tstp 1 2022/10/03 16:14:15;
  cltt 1 2022/10/03 10:14:07;
  binding state free;
  hardware ethernet 6c:2b:59:d2:22:2c;
  uid "\001l+Y\322\",";
}
==========================================
# #### vlan 42 (WAB)
subnet 159.218.42.0 netmask 255.255.255.0 {
        authoritative;
        option broadcast-address 159.218.42.255;
        option subnet-mask 255.255.255.0;
        option routers 159.218.42.254;
        range 159.218.42.138 159.218.42.169;
        range 159.218.42.199 159.218.42.230;
        }
# #### vlan 43 (Business Students)
subnet 159.218.43.0 netmask 255.255.255.0 {
        option broadcast-address 159.218.43.255;
        option subnet-mask 255.255.255.0;
        option routers 159.218.43.254;
        max-lease-time 1814400;
        default-lease-time 1814400;
        range 159.218.43.30 159.218.43.249;
        }
# #### vlan 144 (VU Streaming)
subnet 159.218.144.0 netmask 255.255.248.0 {
        option broadcast-address 159.218.144.255;
        option subnet-mask 255.255.248.0;
        option routers 159.218.144.254;
        authoritative;
        dynamic-bootp-lease-length 3600;
        max-lease-time 3600;
        default-lease-time 3600;
        range 159.218.144.10 159.218.144.246;
        range 159.218.145.5 159.218.145.249;
        range 159.218.146.5 159.218.146.249;
        range 159.218.147.5 159.218.147.249;
        range 159.218.148.5 159.218.148.249;
        range 159.218.149.5 159.218.149.249;
        range 159.218.150.5 159.218.150.249;
        range 159.218.151.5 159.218.151.249;
        }

On Mon, Jun 12, 2023 at 6:24 PM Jamie Cameron <jca...@we...> wrote:

> Can you send a sample of the dhcpd.leases file that contains the leases
> that aren't showing up? The issue may be that Webmin isn't parsing the file
> properly..
>
> On 12/Jun/2023 11:05 Buchanan, Ted <tbu...@vi...> wrote ..
>
> I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP
> version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021
> to help with the administration of this server.  Everything used to
> work/display just fine but suddenly, when trying to list the dynamic leases
> within a subnet, I get the message, "*The DHCPd lease file
> /var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at
> the current time."  *If I click on the List all active and expired leases
> button, I get the message "*The DHCPd lease file
> /var/lib/dhcpd/dhcpd.leases does not contain any leases."*  Clearly, when
> I use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the leases
> exist, new clients receive new IP addresses and existing ones are able to
> renew successfully.  The leases that _DO_ show up are from wireless subnets
> or subnets not directly connected to our campus.  I'm not the only one who
> administers this server/service so the Webmin module is really helpful and
> currently missed.  Any suggestions for troubleshooting and correcting this
> issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees with the current
> operation.  Thank you.
>
> --
> Ted Buchanan
> Senior Systems Administrator - Vincennes University
> tbu...@vi...
> <https://us01.z.antigena.com/l/dqUP8cOmul_TMVZ-c9CL53KECB-ktkSzU6E7GaQmZ7q1_NHLLv4ZTeV8IsnrHrzMnDEEC0h9tHVEduNNeXBWbIHDyhRcdRtElIMmRzoFYDIFNp_EwMISYrohLRiFA3HOIGN8Hi6Hwwae~OuP51J5kKF3BmOVOoieCNiSt~j21pCG~GqPQm>
>
>
>
> -
> Forwarded by the Webmin mailing list at
> web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>


-- 
Ted Buchanan
Senior Systems Administrator - Vincennes University
tbu...@vi...

Can you send a sample of the dhcpd.leases file that contains the leases that aren't showing up? The issue may be that Webmin isn't parsing the file properly.. 

On 12/Jun/2023 11:05 Buchanan, Ted <tbu...@vi...> wrote ..   I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021 to help with the administration of this server.  Everything used to work/display just fine but suddenly, when trying to list the dynamic leases within a subnet, I get the message, "The DHCPd lease file /var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at the current time."  If I click on the List all active and expired leases button, I get the message "The DHCPd lease file /var/lib/dhcpd/dhcpd.leases does not contain any leases."  Clearly, when I use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the leases exist, new clients receive new IP addresses and existing ones are able to renew successfully.  The leases that _DO_ show up are from wireless subnets or subnets not directly connected to our campus.  I'm not the only one who admin
 isters this server/service so the Webmin module is really helpful and currently missed.  Any suggestions for troubleshooting and correcting this issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees with the current operation.  Thank you. --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...     

I'm running Oracle Enterprise Linux 8.8 as a DHCP server with ISC DHCP
version 4.2.6-46 (from the Oracle distribution).  I'm running webmin-2.021
to help with the administration of this server.  Everything used to
work/display just fine but suddenly, when trying to list the dynamic leases
within a subnet, I get the message, "*The DHCPd lease file
/var/lib/dhcpd/dhcpd.leases does not contain any leases that are active at
the current time."  *If I click on the List all active and expired leases
button, I get the message "*The DHCPd lease file
/var/lib/dhcpd/dhcpd.leases does not contain any leases."*  Clearly, when I
use a text editor on the /var/lib/dhcpd/dhcpd.leases file, all the leases
exist, new clients receive new IP addresses and existing ones are able to
renew successfully.  The leases that _DO_ show up are from wireless subnets
or subnets not directly connected to our campus.  I'm not the only one who
administers this server/service so the Webmin module is really helpful and
currently missed.  Any suggestions for troubleshooting and correcting this
issue.  Everything in the /etc/dhcp/dhcpd.conf file agrees with the current
operation.  Thank you.

-- 
Ted Buchanan
Senior Systems Administrator - Vincennes University
tbu...@vi...

<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <p>if it helps anyone else, I was able to deal with this using the
      "up" line on the interface entry in the interfaces config<br>
    </p>
    <p>iface enp7s0 inet static<br>
              address 172.16.1.154<br>
              netmask 255.255.255.0<br>
              network 172.16.1.0<br>
              mtu 9000<br>
              offload-tx  off<br>
              offload-sg  off<br>
              offload-tso off<br>
              up ip route change 172.16.1.0/24 dev enp7s0 proto kernel
      scope link src 172.16.1.154 quickack 1</p>
    <p>This was an iscsi interface, standard acks were killing it with
      high i/o delay, while it did not eliminate the delay it is
      considerably lower</p>
    <p> <br>
    </p>
    <p> <br>
    </p>
    <div class="moz-cite-prefix">On 5/11/2023 6:53 PM, Jamie Cameron
      wrote:<br>
    </div>
    <blockquote type="cite"
cite="mid:011...@us...">
      <meta http-equiv="content-type" content="text/html; charset=UTF-8">
      <p>You can edit static routes in Webmin at Networking -&gt;
        Network Configuration, but there's no field for special options
        like "quickack" unfortunately.. </p>
      <p>On 11/May/2023 06:54 David Lawley <a class="moz-txt-link-rfc2396E" href="mailto:da...@up...">&lt;da...@up...&gt;</a>
        wrote ..
      </p>
      <blockquote type="cite">
        <p>disregard, doing some research after asking , seems to be a
          popular question</p>
        <p>for me is was pretty simple adding another line to the
          interfaces file for that interface</p>
        <p><br>
        </p>
        <p> <br>
        </p>
        <div class="moz-cite-prefix">On 5/11/2023 8:25 AM, David Lawley
          wrote:<br>
        </div>
        <blockquote type="cite"
          cite="mid:0b7...@up...">
          <meta http-equiv="content-type" content="text/html;
            charset=UTF-8">
          <p>Was working with "ack"s on an interface and adding quickack
            1 to the routing like so,</p>
          <p>ip route change 172.16.1.0/24 dev enp7s0 proto kernel scope
            link src 172.16.1.151 quickack 1</p>
          <p>But on reboot the configuration is back to before without
            the quickack 1</p>
          <p>Did not see anywhere in webmin routing and gateway to add
            this.</p>
          <p>Is Webmin overwriting this config on boot?  Anyway to make
            this stick?<br>
          </p>
          <pre class="moz-signature" cols="72">-- 


A quick word on style. I have none.
I have casual way of talking and writing, and a strange sense of humour. 
I also tend to use random pop-culture references a lot, but often in ways that make no sense. 
If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)</pre>
          <br>
          <fieldset class="moz-mime-attachment-header"></fieldset>
          <br>
          <fieldset class="moz-mime-attachment-header"></fieldset>
          <pre class="moz-quote-pre">-
Forwarded by the Webmin mailing list at <a class="moz-txt-link-abbreviated" href="reply_mail.cgi?new=1&amp;to=webadmin%2Dlist%40lists%2Esourceforge%2Enet" moz-do-not-send="true">web...@li...</a>
To remove yourself from this list, go to
<a class="moz-txt-link-freetext" href="http://lists.sourceforge.net/lists/listinfo/webadmin-list" moz-do-not-send="true">http://lists.sourceforge.net/lists/listinfo/webadmin-list</a>
</pre>
        </blockquote>
        <pre class="moz-signature" cols="72">-- 


A quick word on style. I have none.
I have casual way of talking and writing, and a strange sense of humour. 
I also tend to use random pop-culture references a lot, but often in ways that make no sense. 
If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)</pre>
      </blockquote>
      <br>
      <br>
      <br>
      <fieldset class="moz-mime-attachment-header"></fieldset>
      <br>
      <fieldset class="moz-mime-attachment-header"></fieldset>
      <pre class="moz-quote-pre" wrap="">-
Forwarded by the Webmin mailing list at <a class="moz-txt-link-abbreviated" href="mailto:web...@li...">web...@li...</a>
To remove yourself from this list, go to
<a class="moz-txt-link-freetext" href="http://lists.sourceforge.net/lists/listinfo/webadmin-list">http://lists.sourceforge.net/lists/listinfo/webadmin-list</a>
</pre>
    </blockquote>
    <pre class="moz-signature" cols="72">-- 


A quick word on style. I have none.
I have casual way of talking and writing, and a strange sense of humour. 
I also tend to use random pop-culture references a lot, but often in ways that make no sense. 
If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)</pre>
  </body>
</html>

You can edit static routes in Webmin at Networking -> Network Configuration, but there's no field for special options like "quickack" unfortunately..  

On 11/May/2023 06:54 David Lawley <da...@up...> wrote ..   

disregard, doing some research after asking , seems to be a popular question 

for me is was pretty simple adding another line to the interfaces file for that interface 

  

   On 5/11/2023 8:25 AM, David Lawley wrote:    

Was working with "ack"s on an interface and adding quickack 1 to the routing like so, 

ip route change 172.16.1.0/24 dev enp7s0 proto kernel scope link src 172.16.1.151 quickack 1 

But on reboot the configuration is back to before without the quickack 1 

Did not see anywhere in webmin routing and gateway to add this. 

Is Webmin overwriting this config on boot?  Anyway to make this stick?  -- A quick word on style. I have none. I have casual way of talking and writing, and a strange sense of humour. I also tend to use random pop-culture references a lot, but often in ways that make no sense. If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)     - Forwarded by the Webmin mailing list at web...@li... To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-list   -- A quick word on style. I have none. I have casual way of talking and writing, and a strange sense of humour. I also tend to use random pop-culture references a lot, but often in ways that make no sense. If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)  

<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <p>disregard, doing some research after asking , seems to be a
      popular question</p>
    <p>for me is was pretty simple adding another line to the interfaces
      file for that interface</p>
    <p><br>
    </p>
    <p> <br>
    </p>
    <div class="moz-cite-prefix">On 5/11/2023 8:25 AM, David Lawley
      wrote:<br>
    </div>
    <blockquote type="cite"
      cite="mid:0b7...@up...">
      <meta http-equiv="content-type" content="text/html; charset=UTF-8">
      <p>Was working with "ack"s on an interface and adding quickack 1
        to the routing like so,</p>
      <p>ip route change 172.16.1.0/24 dev enp7s0 proto kernel scope
        link src 172.16.1.151 quickack 1</p>
      <p>But on reboot the configuration is back to before without the
        quickack 1</p>
      <p>Did not see anywhere in webmin routing and gateway to add this.</p>
      <p>Is Webmin overwriting this config on boot?  Anyway to make this
        stick?<br>
      </p>
      <pre class="moz-signature" cols="72">-- 


A quick word on style. I have none.
I have casual way of talking and writing, and a strange sense of humour. 
I also tend to use random pop-culture references a lot, but often in ways that make no sense. 
If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)</pre>
      <br>
      <fieldset class="moz-mime-attachment-header"></fieldset>
      <br>
      <fieldset class="moz-mime-attachment-header"></fieldset>
      <pre class="moz-quote-pre" wrap="">-
Forwarded by the Webmin mailing list at <a class="moz-txt-link-abbreviated" href="mailto:web...@li...">web...@li...</a>
To remove yourself from this list, go to
<a class="moz-txt-link-freetext" href="http://lists.sourceforge.net/lists/listinfo/webadmin-list">http://lists.sourceforge.net/lists/listinfo/webadmin-list</a>
</pre>
    </blockquote>
    <pre class="moz-signature" cols="72">-- 


A quick word on style. I have none.
I have casual way of talking and writing, and a strange sense of humour. 
I also tend to use random pop-culture references a lot, but often in ways that make no sense. 
If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)</pre>
  </body>
</html>

<html>
  <head>

    <meta http-equiv="content-type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <p>Was working with "ack"s on an interface and adding quickack 1 to
      the routing like so,</p>
    <p>ip route change 172.16.1.0/24 dev enp7s0 proto kernel scope link
      src 172.16.1.151 quickack 1</p>
    <p>But on reboot the configuration is back to before without the
      quickack 1</p>
    <p>Did not see anywhere in webmin routing and gateway to add this.</p>
    <p>Is Webmin overwriting this config on boot?  Anyway to make this
      stick?<br>
    </p>
    <pre class="moz-signature" cols="72">-- 


A quick word on style. I have none.
I have casual way of talking and writing, and a strange sense of humour. 
I also tend to use random pop-culture references a lot, but often in ways that make no sense. 
If this is a problem you are entitled to a refund of the money you paid to me to write this... ;)</pre>
  </body>
</html>

Oops I messed up the .htaccess file! This is fixed now ..  

On 15/Mar/2023 02:32 Ilia <mai...@il...> wrote ..    Hello, Joho! You're right. I'm also seeing this.  Jamie, www.webmin.com should always redirect to webmin.com.  On Wed, 15 Mar 2023, 09:34 Joaquim Homrighausen, <jo...@we...> wrote:  Hi there  Just a quick note to let you know that, for me, https://webmin.com looks  quite different to https://www.webmin.com.   -joho     - Forwarded by the Webmin mailing list at web...@li... To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-list      

Hello, Joho! You're right. I'm also seeing this.

Jamie, *www.webmin.com <http://www.webmin.com>* should always redirect
to *webmin.com
<http://webmin.com>*.


On Wed, 15 Mar 2023, 09:34 Joaquim Homrighausen, <jo...@we...>
wrote:

>
> Hi there
>
> Just a quick note to let you know that, for me, https://webmin.com looks
> quite different to https://www.webmin.com.
>
>
> -joho
>
>
>
>
> -
> Forwarded by the Webmin mailing list at
> web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>

Hi there

Just a quick note to let you know that, for me, https://webmin.com looks 
quite different to https://www.webmin.com.


-joho

On 23/Feb/2023 00:17 Joaquim Homrighausen <jo...@we...> wrote ..
> On 2023-02-23 06:12, Jamie Cameron wrote:
> > That's odd - did you try clicking Refresh Modules on the left menu?
> 
> Yes I did. And then I went down to "unused modules" and clicked on it 
> and it "worked", but it did display the warning about the missing Perl 
> package.

Ok, that's kind of expected - the list of visible modules is only updated
when you refresh, so if PostgreSQL wasn't installed when Webmin was, this 
can happen.

On 2023-02-23 06:12, Jamie Cameron wrote:
> That's odd - did you try clicking Refresh Modules on the left menu?


Yes I did. And then I went down to "unused modules" and clicked on it 
and it "worked", but it did display the warning about the missing Perl 
package.



-joho

On 22/Feb/2023 02:46 Joaquim Homrighausen <jo...@we...> wrote ..
> 
> Any reason why I can't have Webmin use tar.gz for the pgsql backups?
> 
> Or specify parameters to pg_dump?

Good point, we really should add support for compressed backups in
PostgreSQL. I'll look into this ..

On 22/Feb/2023 01:06 Joaquim Homrighausen <jo...@we...> wrote ..
> 
> Does the PostgreSQL module not support the %Y%m%d "macros" in the 
> "Backup files directory" field? This works beautifully for MySQL backups 
> and is very convenient.

It does, but you have to turn on the "Do strftime substitution of backup
destinations?" option on the module configuration page.

> Also ...
> 
> It took me a while to figure out why the PostgreSQL module did not show 
> as active, installing the correct Perl module did the trick.
> 
> But what's interesting is that when I clicked on it, under unused 
> modules, it could talk to PostgreSQL just fine. It just showed me a 
> warning that backups could not be made due to a missing Perl module.
> 
> Perhaps that handling could be improved.

That's odd - did you try clicking Refresh Modules on the left menu?

Any reason why I can't have Webmin use tar.gz for the pgsql backups?

Or specify parameters to pg_dump?


-joho

On the first, yes indeed: "Do strftime substitution of backup 
destinations?". My bad.


On 2023-02-22 10:06, Joaquim Homrighausen wrote:
>
> Does the PostgreSQL module not support the %Y%m%d "macros" in the 
> "Backup files directory" field? This works beautifully for MySQL 
> backups and is very convenient.
>
>
> Also ...
>
> It took me a while to figure out why the PostgreSQL module did not 
> show as active, installing the correct Perl module did the trick.
>
> But what's interesting is that when I clicked on it, under unused 
> modules, it could talk to PostgreSQL just fine. It just showed me a 
> warning that backups could not be made due to a missing Perl module.
>
> Perhaps that handling could be improved. 

Does the PostgreSQL module not support the %Y%m%d "macros" in the 
"Backup files directory" field? This works beautifully for MySQL backups 
and is very convenient.


Also ...

It took me a while to figure out why the PostgreSQL module did not show 
as active, installing the correct Perl module did the trick.

But what's interesting is that when I clicked on it, under unused 
modules, it could talk to PostgreSQL just fine. It just showed me a 
warning that backups could not be made due to a missing Perl module.

Perhaps that handling could be improved.






-joho

On 23/Jan/2023 13:57 Michael Romagnoli <we...@ro...> wrote ..
> 
> Here is an odd, but small bug when using Usermin Mail:
> 
> When you hit "reply", normally a "re:" appears in the subject line.  This happens,
> but not always.  If the subject starts with "re" (capitalized or lowercase), the
> "re:" for the reply does not appear!
> 
> If I were to guess, there is a test case for whether or not there is a reply, and
> to only place the "re:" if "re" is not already there.  Maybe test for "re:" as
> whether or not to apply an "re:" for the subject line?  That's just a guess on
> my part, though.....

Thanks for pointing this out! I'll fix that in the next release ..

Here is an odd, but small bug when using Usermin Mail:

When you hit "reply", normally a "re:" appears in the subject line.  This happens, but not always.  If the subject starts with "re" (capitalized or lowercase), the "re:" for the reply does not appear!

If I were to guess, there is a test case for whether or not there is a reply, and to only place the "re:" if "re" is not already there.  Maybe test for "re:" as whether or not to apply an "re:" for the subject line?  That's just a guess on my part, though.....

-Mike

we're good

On Fri, Jan 20, 2023 at 5:37 PM Jamie Cameron <jca...@we...> wrote:

>  Please try again now - I mistakenly didn't upload the 2.013 files after
> announcing the release.
>
> On 20/Jan/2023 05:28 Buchanan, Ted <tbu...@vi...> wrote ..
>
> I first noticed a problem when in the Webmin interface on one of my Oracle
> 8 linux servers.  It said an update to 2.012 was available but when I
> clicked to update, it gave a 404 error.  Then when I clicked the link
> http://prdownloads.sourceforge.net/webadmin/webmin-2.013-1.noarch.rpm, it
> took me to https://sourceforge.net/projects/webadmin/files/ and the
> latest version was listed as 1.979.  When I clicked on the Webmin folders,
> 1.979 was the latest folder I could see.  I see the same thing now.  Now
> when I go to https://webmin.com it shows 2.013 is available but when I
> click on the RPM link, it takes me to
> https://sourceforge.net/projects/webadmin/files/ and the latest file is
> listed as 1.851.& nbsp; I do see a folder for 2.013 but no files within.
> This is with Firefox from a Fedora 37 workstation.  Same thing with google
> chrome.  Yesterday, the folders eventually populated and I was able to
> manually download 2.012 successfully.
>
> On Thu, Jan 19, 2023 at 9:19 PM Jamie Cameron <jca...@we...
> <http://reply_mail.cgi?new=1&to=jcameron%40webmin%2Ecom>> wrote:
>
>> On 19/Jan/2023 07:09 Buchanan, Ted <tbu...@vi...
>> <http://reply_mail.cgi?new=1&to=tbuchanan%40vinu%2Eedu>> wrote ..
>>
>> folders on sourceforge only go up to 1.979
>>
>>
>> That's odd, I can see the 2.012 version on sourceforge. What URL are you
>> looking at?
>>
>> -
>> Forwarded by the Webmin mailing list at
>> web...@li...
>> <http://reply_mail.cgi?new=1&to=webadmin%2Dlist%40lists%2Esourceforge%2Enet>
>> To remove yourself from this list, go to
>> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>>
>
>
> --
> Ted Buchanan
> Senior Systems Administrator - Vincennes University
> tbu...@vi... <http://reply_mail.cgi?new=1&to=tbuchanan%40vinu%2Eedu>
>
>
>
> -
> Forwarded by the Webmin mailing list at
> web...@li...
> To remove yourself from this list, go to
> http://lists.sourceforge.net/lists/listinfo/webadmin-list
>


-- 
Ted Buchanan
Senior Systems Administrator - Vincennes University
tbu...@vi...

 Please try again now - I mistakenly didn't upload the 2.013 files after announcing the release. 

On 20/Jan/2023 05:28 Buchanan, Ted <tbu...@vi...> wrote ..   I first noticed a problem when in the Webmin interface on one of my Oracle 8 linux servers.  It said an update to 2.012 was available but when I clicked to update, it gave a 404 error.  Then when I clicked the link http://prdownloads.sourceforge.net/webadmin/webmin-2.013-1.noarch.rpm, it took me to https://sourceforge.net/projects/webadmin/files/ and the latest version was listed as 1.979.  When I clicked on the Webmin folders, 1.979 was the latest folder I could see.  I see the same thing now.  Now when I go to https://webmin.com it shows 2.013 is available but when I click on the RPM link, it takes me to https://sourceforge.net/projects/webadmin/files/ and the latest file is listed as 1.851.  I do see a folder for 2.013 but no files within.  This is with Firefox from a Fedora 37 workstation.  Same thing with google chrome.  Yesterday, the folders eventually populated and I was able to manually download 2.012
  successfully.  On Thu, Jan 19, 2023 at 9:19 PM Jamie Cameron <jca...@we...> wrote: On 19/Jan/2023 07:09 Buchanan, Ted <tbu...@vi...> wrote ..  folders on sourceforge only go up to 1.979  

 That's odd, I can see the 2.012 version on sourceforge. What URL are you looking at? 

  - Forwarded by the Webmin mailing list at web...@li... To remove yourself from this list, go to http://lists.sourceforge.net/lists/listinfo/webadmin-list  --   Ted BuchananSenior Systems Administrator - Vincennes Uni...@vi...