Search Results for "sourceforge.net/projects/winpython/files/winpython_3.8/3.8.10.0/winpython64-3.8.10.0.7z"
Sort By:
Showing 538 open source projects for "sourceforge.net/projects/winpython/files/winpython_3.8/3.8.10.0/winpython64-3.8.10.0.7z"
View related business solutions-
Award-Winning Medical Office Software Designed for Your SpecialtyRXNT is an ambulatory healthcare technology pioneer that empowers medical practices and healthcare organizations to succeed and scale through innovative, data-backed, AI-powered software.
-
Collect! is a highly configurable debt collection softwareThe flexible & scalable debt collection software built to automate your workflow. From startup to enterprise, we have the solution for you.
-
1
LeoCAD
A CAD application for creating virtual LEGO models
...At the same time, it has a rich feature set that enables experienced users to build models by using techniques that are more advanced. LeoCAD is fully compatible with the LDraw Standard and related tools, and it reads and writes LDR and MPD files so that you can share and download models from the Internet. It also uses the LDraw parts library, which has over 10,000 different parts and continues to receive updates. Native versions are available for Windows, Linux, and macOS to ensure that users are familiar with the program interface. LeoCAD is open-source, so anyone can contribute with fixes and features, and it is always going to remain free. -
2
ESP3D
FW for ESP8266/ESP8285/ESP32 used with 3D printer
...Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in the data directory but UI has its own repository ESP3D-WEBUI. Use GPIO2 to the ground to reset all settings in a hard way, 2-6 sec after boot / not before!! Set GPIO2 to ground before boot change boot mode and go to special boot that do not reach FW. Currently, boot takes 10 sec - giving 8 seconds to connect GPIO2 to GND and do a hard recovery for settings. ... -
3
ModRSsim2
mod_RSsim Fork with Updates
Modbus Simulator for RS-232 and TCP/IP. Fork of mod_RSsim (https://sourceforge.net/projects/modrssim). Requires Microsoft Visual C++ Redistributable for Visual Studio 2010. For 32 bit and 64 bit Operating Systems http://go.microsoft.com/fwlink/?LinkID=177916&clcid=0x489 -
4
HEALPix
Data Analysis, Simulations and Visualization on the Sphere
...Please acknowledge HEALPix by quoting the web page http://healpix.sourceforge.net (or https://healpix.sourceforge.io) and publication: K.M. Gorski et al., 2005, Ap.J., 622, p.759 Full software documentation available at https://healpix.sourceforge.io/documentation.php Wiki Pages: https://sourceforge.net/p/healpix/wiki/Home Exchanging Data with HEALPix (in FITS files): https://sourceforge.net/p/healpix/wiki/Exchanging%20Data%20with%20HEALPix/ GDL and FL users should read https://sourceforge.net/p/healpix/wiki/HEALPix%20and%20GDL/ -
The Most Powerful Software Platform for EHSQ and ESG ManagementChoose from a complete set of software solutions across EHSQ that address all aspects of top performing Environmental, Health and Safety, and Quality management programs.
-
5
gptoolbox
Matlab toolbox for Geometry Processing
...Most of the functions are pure MATLAB code, requiring only that the toolbox be added to the MATLAB path, while some specialized features depend on external libraries and compiled mex files. -
6
Quantum++
Modern C++ quantum computing library
Quantum++ is a modern C++ general-purpose quantum computing library, composed solely of template header files. Quantum++ is written in standard C++17 and has very low external dependencies, using only the Eigen 3 linear algebra header-only template library and, if available, the OpenMP multiprocessing library. Quantum++ is not restricted to qubit systems or specific quantum information processing tasks, being capable of simulating arbitrary quantum processes. -
7
GPXSee
GPS log file viewer and analyzer
GPS log file viewer and analyzer with support for GPX, TCX, KML, FIT, IGC, NMEA, SLF, SML, LOC, GPI, GeoJSON and OziExplorer files. -
8
AudeLA is a TCL extension aimed at providing amateur astronomers with image processing, telescope controling, ccd camera driving, and various astronomical algorithms. Web site : https://sourceforge.net/p/audela/wiki/fr_accueil Web site : https://sourceforge.net/p/audela/wiki/en_welcome
-
9
XBNF Neurotranslator compiler
(X)BNF simple and clever translation grammar compiler
XBNF Neurotranslator is a powerfull extended BNF grammar language to handle translations easily and many features to handle different kind of situations. This project is for common arch binaries, C++ sources, tests & support tickets. No installation, juste get binary for your architecture : > See [Files] > binary.{version} Library of smart samples of grammars> https://sourceforge.net/projects/xbnf/ Docker image which embeds the Linux/64bits binary and the library. https://hub.docker.com/r/damolab/neurotranslator/ Docker image with GNU C++ toolchain to build the xbnf command: https://hub.docker.com/r/damolab/neurotranslator-compil French blog dedicated to XBNF : https://damolab.zapto.org/xbnf/ -
AestheticsPro Medical Spa SoftwareAestheticsPro is the most complete Aesthetics Software on the market today. HIPAA Cloud Compliant with electronic charting, integrated POS, targeted marketing and results driven reporting; AestheticsPro delivers the tools you need to manage your medical spa business. It is our mission To Provide an All-in-One Cutting Edge Software to the Aesthetics Industry.
-
10
tacklelib
The C++11 library, msvc2015u3/gcc5.4 + cmake,python,bash,vbs modules
https://sourceforge.net/p/tacklelib/tacklelib/ci/master/tree/README.md https://sourceforge.net/p/tacklelib/tacklelib/ci/master/tree/README_EN.txt https://sourceforge.net/p/tacklelib/tacklelib/ci/master/tree/README_EN.deps.txt https://sourceforge.net/p/tacklelib/tacklelib/ci/master/tree/README_EN.linux_x86_64.txt https://sourceforge.net/p/tacklelib/tacklelib/ci/master/tree/changelog.txt -
11
GNSS-SDR
An open source software-defined GNSS receiver
An open source software-defined Global Navigation Satellite Systems (GNSS) receiver written in C++ and based on the GNU Radio framework. -
12
The goal of this project is to open the OpenFOAM CFD toolbox to community contributed extensions. Visit https://sourceforge.net/p/openfoam-extend/wiki/Home/ for more information. OPENFOAM(R) is a registered trademark of OpenCFD Limited.
-
13
QTester104
IEC 60870-5-104 protocol tester.
This software implements the IEC60870-5-104 protocol (client side) for substation data acquisition and control via tcp/ip network using the QT UI Framework. It can be compiled on Linux and Windows platforms. It's possible to poll and view data from the remote system (RTU) and also send commands. >>> Have a look also at my new SCADA project here: https://github.com/riclolsen/json-scada -
14
BuddyCAD
A set of freeware applications for viewing/processing P-CAD files.
BuddyCAD Viewer+ can view/process files for following P-CAD versions: - P-CAD v4.5 - P-CAD v8.5 / v8.7 / v9.0 - P-CAD 99 / Accel / 2002 / 2004 / 2006 (through ASCII import) -
15
CBECC-Com
Nonresidential California Energy Commission Performance Compliance
California Energy Commission software for nonresidential building energy code compliance analysis based on the performance path. License (modified BSD) for CEC Compliance Engine and CBECC-Com UI: https://sourceforge.net/p/cbecc-com/code/HEAD/tree/trunk/CBECC-Com13/License.txt License for embedded EnergyPlus software: https://sourceforge.net/p/cbecc-com/code/HEAD/tree/trunk/CBECC-Com13/License-EPlusUser.txt -
16
IEC 60870-5 101 Client Master Simulator
Simulate iec101 client Master supports all type ofASDU,monitor,command
...Interoperability: http://www.freyrscada.com/docs/FreyrSCADA-IEC-60870-5-101-Client-Interoperability.pdf Download Evaluation Kit - IEC 60870-5-101 Development Bundle: In the Development Bundle, We included IEC 60870-5-101 Server & Client Simulator, Windows and Linux Software Development Kit. http://www.freyrscada.com/iec-60870-5-101.php you can test the simulator with IEC 101 Server Simulator. and use the serial null modem emulator (https://sourceforge.net/projects/com0com/) for connecting IEC server and client simulator via serial cable. * video tutorial: https://www.youtube.com/playlist?list=PL4tVfIsUhy1bsVPrJVW4nknHozdfcWE5u -
17
Grassroots DICOM
Cross-platform DICOM implementation
Grassroots DiCoM is a C++ library for DICOM medical files. It is accessible from Python, C#, Java and PHP. It supports RAW, JPEG, JPEG 2000, JPEG-LS, RLE and deflated transfer syntax. It comes with a super fast scanner implementation to quickly scan hundreds of DICOM files. It supports SCU network operations (C-ECHO, C-FIND, C-STORE, C-MOVE). PS 3.3 & 3.6 are distributed as XML files. -
18
TORCS, The Open Racing Car Simulator is a highly portable multi platform car racing simulation. It is used as ordinary car racing game, as AI racing game and as research platform. It runs on Linux (x86, AMD64, ARM and PPC), FreeBSD, OpenSolaris and Windows.
-
19
Snap7
32/64 bit multi-platform Ethernet S7 PLC communication suite
...Hi level object oriented wrappers are provided, currently C/C++, .NET/Mono, Pascal, LabVIEW, Python with many source code examples. Very easy to use, a full working server example is not bigger than the “Hello world”. Many projects/makefiles are ready to run to easily rebuild Snap7 in any platform without the need of be a C++ guru. Very detailed documentation provided. -
20
OSRA is a utility designed to convert graphical representations of chemical structures and reactions, as they appear in journal articles, patent documents, textbooks, trade magazines etc., into SMILES or SD file format- a computer recognizable molecular structure You can find links to the binary executables here: https://sourceforge.net/p/osra/wiki/Download/
-
21
CBFLIB is a library of ANSI-C functions providing a simple mechanism for accessing Crystallographic Binary Files (CBF files) and Image-supporting CIF (imgCIF) files. The CBFLIB API is loosely based on the CIFPARSE API for mmCIF files.
-
22
Armadillo
fast C++ library for linear algebra & scientific computing
* Fast C++ library for linear algebra (matrix maths) and scientific computing * Easy to use functions and syntax, deliberately similar to Matlab / Octave * Uses template meta-programming techniques to increase efficiency * Provides user-friendly wrappers for OpenBLAS, Intel MKL, LAPACK, ATLAS, ARPACK, SuperLU and FFTW libraries * Useful for machine learning, pattern recognition, signal processing, bioinformatics, statistics, finance, etc. * Downloads:... -
23
ToxTrac
Free Animal Tracking Software
ToxTrac is a free Windows program optimized for tracking animals. It uses an advanced tracking algorithm and includes Preprocessing, Background subtraction, Thresholding, Post-processing, and Filters. It is robust; very fast; and can handle one or several animals in one or several environments. The program provides useful statistics as output. ToxTrac can be used for fish, insects, rodents, etc. If used, please cite: Rodriguez, A., Zhang, H., Klaminder, J., Brodin, T., Andersson, P.... -
24
AUDio MEasurement System
PC based Oscilloscope and Spectrum analyzer using sound card
AUDio MEasurement System - a multi-platfrom system for audio measurement through sound card in the PC. It contains: generator, oscilloscope, audio spectrum analyzer (FFT) and frequency sweep plot. Compiles and works under Linux, Windows and MacOS. Source code is available in "git" and as ZIP snapshot. For more information see README.md -
25
FreeCAD
a parametric 3D CAD modeler
This is an official mirror of FreeCAD. Code and release files are primarily hosted on https://github.com/FreeCAD/FreeCAD and mirrored here. FreeCAD is a general purpose feature-based, parametric 3D modeler for CAD, MCAD, CAx, CAE and PLM, aimed directly at mechanical engineering and product design but also fits a wider range of uses in engineering, such as architecture or other engineering specialties.
