devil-linux-develop Mailing List for Devil-Linux (Page 47)

ee...@fr... a écrit :
> Hi,
>
> davide mion a écrit :
>   
>> I've tried right lfssystem. DL-1.0_and_up for version 1.2, DL 1.3.4 for
>> develop version.
>> But the problem there's anyway
>>
>>   
>>     
Maybe you have set Parallel Build Jobs in the build Configuration ...

I remember having all sorts of compile errors when set and no more
problems when unset ...

check it out ...

> Can you tail tmp/LOG/build/glibc on the 1.2 branch, please?
>
> I had a problem with glibc, but at the install stage ... so I don't
> "see" what is your problem.
>
> MaNU
>   
>> manu_escar wrote:
>>   
>>     
>>> davide mion a écrit :
>>>     
>>>       
>>>> I've tried with both version. First I've tried with 1.2 and the error was
>>>> in
>>>>       
>>>>         
>>> Have you noticed you're not to use the same lfssystem for 1.2 and 1.3 :
>>>
>>> lfssystem-for-DL-1.0_and_up/lfssystem-cvs-20030127-i486-stripped.tar.bz2
>>> for 1.2 and
>>>
>>> lfssystem-for-DL-1.3.4_and_up/lfssystem-SVN-20070314-cleaned.tar.bz2
>>>
>>> sorry if it seems stupid ... there has been such mistakes already ...
>>>
>>> MaNU
>>>
>>>
>>> -------------------------------------------------------------------------
>>> This SF.net email is sponsored by DB2 Express
>>> Download DB2 Express C - the FREE version of DB2 express and take
>>> control of your XML. No limits. Just data. Click to get it now.
>>> http://sourceforge.net/powerbar/db2/
>>> _______________________________________________
>>> Devil-linux-develop mailing list
>>> Dev...@li...
>>> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
>>>
>>>
>>>     
>>>       
>>   
>>     
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Devil-linux-develop mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
>   

Hi,

davide mion a écrit :
> I've tried right lfssystem. DL-1.0_and_up for version 1.2, DL 1.3.4 for
> develop version.
> But the problem there's anyway
>
>   
Can you tail tmp/LOG/build/glibc on the 1.2 branch, please?

I had a problem with glibc, but at the install stage ... so I don't
"see" what is your problem.

MaNU
> manu_escar wrote:
>   
>> davide mion a écrit :
>>     
>>> I've tried with both version. First I've tried with 1.2 and the error was
>>> in
>>>       
>> Have you noticed you're not to use the same lfssystem for 1.2 and 1.3 :
>>
>> lfssystem-for-DL-1.0_and_up/lfssystem-cvs-20030127-i486-stripped.tar.bz2
>> for 1.2 and
>>
>> lfssystem-for-DL-1.3.4_and_up/lfssystem-SVN-20070314-cleaned.tar.bz2
>>
>> sorry if it seems stupid ... there has been such mistakes already ...
>>
>> MaNU
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Devil-linux-develop mailing list
>> Dev...@li...
>> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
>>
>>
>>     
>
>   

I've tried right lfssystem. DL-1.0_and_up for version 1.2, DL 1.3.4 for
develop version.
But the problem there's anyway

manu_escar wrote:
>=20
> davide mion a =C3=A9crit :
>> I've tried with both version. First I've tried with 1.2 and the error wa=
s
>> in
>=20
> Have you noticed you're not to use the same lfssystem for 1.2 and 1.3 :
>=20
> lfssystem-for-DL-1.0_and_up/lfssystem-cvs-20030127-i486-stripped.tar.bz2
> for 1.2 and
>=20
> lfssystem-for-DL-1.3.4_and_up/lfssystem-SVN-20070314-cleaned.tar.bz2
>=20
> sorry if it seems stupid ... there has been such mistakes already ...
>=20
> MaNU
>=20
>=20
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Devil-linux-develop mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
>=20
>=20

--=20
View this message in context: http://www.nabble.com/Problem-building-devil-=
linux-tf4102817.html#a11683683
Sent from the devil-linux-develop mailing list archive at Nabble.com.

davide mion a écrit :
> thanks.. I've understood this..
> I've another question:
>
> I have to create only the script in folder /build/scripts or I've to add
> another script in the folder /build/scripts/scripts and
> /build/scripts/configuration ?
>
> Could you give me the exactly sequence of operation that I have to do? 
> There's a method to test my own script and if their operate in the right
> way? 
>
> I have to replace postfix with sendmail, add amavisd-new, m4 and nph (m4 and
> nph are needs by sendmail)
>
>   

What I'll do is :

start on the 1.2 branch as 1.3 still have some issues you won't have to
fight with as a first try!

1) build / install a complete DL distib based on last cvs and source update
2) download needed tarballs in src-extra/ directory
3) "cr" to enter the lfssystem
4) cd tmp && tar xvzf ../src-tmp/mypackage.tgz
5) cd mypackage/
6) ./configure ..... in other words, start building your app as if you
where on a std distro ... then you'll most likely notice some errors
about libraries and application paths missing for proper build ... (have
a look at the environment paths in the devel doc to know where to look
for things ...)
7) create your scripts/mypackage script when you have successfully
compiled mypackage ... you'll likely have some --with-libxy=/some/path
things to add after the ./configure in the build part of the mypackage
script.

you can then try a make prepare build ... to see what's going on ...

Hope it helped

MaNU

> Serge Leschinsky wrote:
>   
>> Davide! wrote:
>>
>>     
>>> *I wish adding the programs sendmail and amavis at Devil-Linux and
>>> remove dspam and postfix. I've read the documentation, install the build
>>> development, but I don't have understand how can add the programs. I've
>>> the source of sendmail and amavis. I ask you if someone can explain
>>> exactly the procedure to add the programs. Thanks*
>>>       
>> Have you read the project doc?
>> 4.3. Adding Programs
>> http://www.devil-linux.org/documentation/1.3.x/ch03s04.html#d0e1879
>>
>> In short, you should create a script ( choose something as a prototype
>> from
>> scripts/* ), put it to script/ and then put the appropriate source to src/
>> dir.
>> "make prepare" is required to recalculate dependencies.
>>
>> --
>>  Serge Leschinsky
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Devil-linux-develop mailing list
>> Dev...@li...
>> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
>>
>>
>>     
>
>   

Another things usefull is :

better add your sources and patches in src-extra than in src as when you
start the update_src, it will destroy any file which is not on the main
server ... some of your work could disapear ...

the make unpack will extract any archive in tmp/ as if it was in src/

You could then maintain your build env up to date without too much pain
during testing of your addings, and then only have to modify a few paths
,for ex if using patch files located in src-extra instead of src, when
submitting your work for inclusion in the cvs tree.

It's not the same when you start cvs update -d -P but be carefull as if
you have modified for ex scripts/linux , and in the same time that file
has envolved on the cvs server, you wont get the new one ... so you may
rename your modified scripts/package-xy to scripts/package-xy.mod or so
to run a diff after the cvs update command ...

Have Fun,

MaNU

davide mion a écrit :
> I've tried with both version. First I've tried with 1.2 and the error was in

Have you noticed you're not to use the same lfssystem for 1.2 and 1.3 :

lfssystem-for-DL-1.0_and_up/lfssystem-cvs-20030127-i486-stripped.tar.bz2
for 1.2 and

lfssystem-for-DL-1.3.4_and_up/lfssystem-SVN-20070314-cleaned.tar.bz2

sorry if it seems stupid ... there has been such mistakes already ...

MaNU

hi,

davide mion a écrit :
> thanks.. I've understood this..
> I've another question:
>
> I have to create only the script in folder /build/scripts or I've to add
> another script in the folder /build/scripts/scripts and
>   
it's for a specific/modified config file you want to have a copy in /etc
for exemple; you have to manage this with the script in build/scripts ...
> /build/scripts/configuration ?
>   

It's in case you want to add the possibility to enable/disable your
add-on in the make menuconfig ... you may want to create a file in
build/scripts/configuration/help with mypackage.help to provide a
description of your new package ...


Have fun With DL ;)

MaNU
>
> Serge Leschinsky wrote:
>   
>> Davide! wrote:
>>
>>     
>>> *I wish adding the programs sendmail and amavis at Devil-Linux and
>>> remove dspam and postfix. I've read the documentation, install the build
>>> development, but I don't have understand how can add the programs. I've
>>> the source of sendmail and amavis. I ask you if someone can explain
>>> exactly the procedure to add the programs. Thanks*
>>>       
>> Have you read the project doc?
>> 4.3. Adding Programs
>> http://www.devil-linux.org/documentation/1.3.x/ch03s04.html#d0e1879
>>
>> In short, you should create a script ( choose something as a prototype
>> from
>> scripts/* ), put it to script/ and then put the appropriate source to src/
>> dir.
>> "make prepare" is required to recalculate dependencies.
>>
>> --
>>  Serge Leschinsky
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> Devil-linux-develop mailing list
>> Dev...@li...
>> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
>>
>>
>>     
>
>   

Rudner, Björn wrote:
> 
> now to the problem with the dot "." after the module-names:
> looking at the "setup"-script shows the problem
> on line 470 the driver-modules are enumerated but the script uses the 2.4-extension ".o"
> this has to be replaced with the 2.6-fashion ".ko"
Thank you! Fixed.

> 
> Also there are some other "problems" with the make build itself.
> There are still some "unanswered" questions regarding the kernel-settings (IO-Scheduler and so on...)
> 
Yes, it's my unfinished task. I suggested some time ago to do the following:
scripts/prepare:

-       make oldconfig || exit 1
+       ( yes | sed 's/y//' | make oldconfig ) || exit 1

It should let wait till everything will be done.

--
 Serge Leschinsky

Hi,

roy barnard wrote:

> 
> You are right to say network is working. my problem is
> is that there are two copies of ifconfig.
Oops...
> 
> The first one found of the path is built from
> inetutils and this produces output like this:
....
> Both work, I prefer the second option attached is the
> patch I used.
>
Fixed. Thank you for the patch!


> The setup tool adds a trailing dot (.) on the module
> name in the config file.
...
> This is not critical as the module is already loaded
> (discovered at boot), so "/etc/init.d/network restart"
> will get the card up and working.
Hm... Well, I've noted it in my TODO list (but with low priority).

> There are other duplicate files:
> 
> groups, hostname and mktmp can be found in both /bin
> and /usr/bin both sets work but are different
> binaries.
...
> ntlm_auth can be found in both /usr/bin and /usr/sbin,
> again both execute but are different binaries.
...
> rpc.rquoted can be found in /sbin and /usr/bin, both
> execute and are different binaries.
hostname - coreutils and net-tools
groups  - coreutils and shadow
mktmp -(?)
ntlm_auth - squid and samba (?)
rpc.rquotad  - quota-tools and nfs-utils

Please help me to make decision :-)

> 
> Also every time I restart networking I get :
> 
> /etc/wlan/shared: line 77: :[ too many arguments.
> 
> any ideas?
Not yet, sorry. I excluded wifi-related options while was doing the last build.

--
 Serge Leschinsky

davide mion wrote:
> thanks.. I've understood this..
> I've another question:
> 
> I have to create only the script in folder /build/scripts or I've to add
> another script in the folder /build/scripts/scripts and
> /build/scripts/configuration ?
/build/scripts - contents exactly 'build' scripts ( i.e. a-la "configure, make,
make install")

/build/scripts/scripts - contents 'init' scripts (more often than not)

/build/scripts/configuration - contents 'menu' files, i.e. these files are used
for creating menu (and .config file for DL iso) if you do 'make menuconfig'.

So, you should create at least one script and copy it to /build/scripts.

-- 
Serge Leschinsky

Hi,

Jan Hugo Prins wrote:

>> syslinux:
>>
>> It's a problem for me too - I can't compile syslinux v.3.51, only 3.36. Use the
>> version 3.36.
> Here syslinux compiles if I disable the hardened compile options of gcc.
Jan, have I understood you correctly that you disabled hardened compile options
of gcc for DL _in whole_? As regards my attempts, I still hope to keep the
hardened compile option for the system...

> I have tried creating the config with the setup command but this did not 
> work for me.
> As I said before, I think the initscripts should be upgraded to use 
> iproute2 instead of the ancient ifconfig commands.
> I created all network configs using fwbuilder and the fwbuilder script 
> uses iproute2 to setup the interfaces.
It's a devilishly hard task. I'd like to avoid it as far as possible.

--
Serge Leschinsky

This is the list of questions asked by the prepare build - script: (i've
used the default on all)

  Default I/O scheduler
  > 1. Anticipatory (DEFAULT_AS)
    2. No-op (DEFAULT_NOOP)
  choice[1-2?]:


High Memory Support
  1. off (NOHIGHMEM)
> 2. 4GB (HIGHMEM4G)
  3. 64GB (HIGHMEM64G)
choice[1-3]:


Memory model
> 1. Flat Memory (FLATMEM_MANUAL)
  2. Sparse Memory (SPARSEMEM_MANUAL)
choice[1-2]:


Timer frequency
  1. 100 HZ (HZ_100)
  2. 250 HZ (HZ_250)
  3. 300 HZ (HZ_300)
> 4. 1000 HZ (HZ_1000)
choice[1-4?]:

  Default CPUFreq governor
  > 1. performance (CPU_FREQ_DEFAULT_GOV_PERFORMANCE)
    2. userspace (CPU_FREQ_DEFAULT_GOV_USERSPACE)
  choice[1-2?]:

  PCI access mode
    1. BIOS (PCI_GOBIOS)
    2. MMConfig (PCI_GOMMCONFIG)
    3. Direct (PCI_GODIRECT)
  > 4. Any (PCI_GOANY)
  choice[1-4?]:


      Choose IP: FIB lookup algorithm (choose FIB_HASH if unsure)
      > 1. FIB_HASH (ASK_IP_FIB_HASH)
        2. FIB_TRIE (IP_FIB_TRIE)
      choice[1-2]:

      Netfilter connection tracking support
      > 1. Layer 3 Independent Connection tracking =
(NF_CONNTRACK_SUPPORT)
        2. Layer 3 Dependent Connection tracking (OBSOLETE)
(IP_NF_CONNTRACK_SUPPORT)
      choice[1-2]:

  Packet scheduler clock source
  > 1. Timer interrupt (NET_SCH_CLK_JIFFIES)
    2. gettimeofday (NET_SCH_CLK_GETTIMEOFDAY)
  choice[1-2?]:

      BCM43xx data transfer mode
      > 1. DMA + PIO (BCM43XX_DMA_AND_PIO_MODE)
        2. DMA (Direct Memory Access) only (BCM43XX_DMA_MODE)
        3. PIO (Programmed I/O) only (BCM43XX_PIO_MODE)
      choice[1-3]:


  Select DLM communications protocol
  > 1. TCP/IP (DLM_TCP)
    2. SCTP (DLM_SCTP)
  choice[1-2?]:
=20




another question: isn't there any RUNFROMRAM in DL 1.3.4 ? I've used in =
in
1.2. all the time.



-----Urspr=FCngliche Nachricht-----
Von: dev...@li...
[mailto:dev...@li...] Im Auftrag =
von
"Rudner, Bj=F6rn"
Gesendet: Mittwoch, 18. Juli 2007 15:44
An: dev...@li...
Betreff: Re: [Devil-linux-develop] devil linux 1.3.4 (2007-07-11)
buildandnetwork problems

Hi there,
I've also managed to build 1.3.4 today and am now taking a deeper look =
at
it.

First: ncurses hat to be disabled and syslinux had to be downgraded at =
my
build-system aswell.

now to the problem with the dot "." after the module-names:
looking at the "setup"-script shows the problem on line 470 the
driver-modules are enumerated but the script uses the 2.4-extension ".o"
this has to be replaced with the 2.6-fashion ".ko"

Also there are some other "problems" with the make build itself.
There are still some "unanswered" questions regarding the =
kernel-settings
(IO-Scheduler and so on...)

so running the build with CONFIG_DISABLELOGGING=3Dy in .config will show =
what
to add/change.

I will keep you updated as my evaluation goes on.

My purpose is to setup a loadbalancing cluster of reverse-proxy-apaches
using shorewall, heartbeat and httpd.

Cheers,
Bj=F6rn



-----Urspr=FCngliche Nachricht-----
Von: dev...@li...
[mailto:dev...@li...] Im Auftrag =
von
roy barnard
Gesendet: Mittwoch, 18. Juli 2007 01:19
An: dev...@li...
Betreff: Re: [Devil-linux-develop] devil linux 1.3.4 (2007-07-11) build
andnetwork problems

Hi again,

Many thanks for the help so far.

The patch file asm_types.h.patch allowed me to compile quagga. :-)

The patch file for mount_cdrom works great! :-)

You are right to say network is working. my problem is is that there are =
two
copies of ifconfig.

The first one found of the path is built from inetutils and this =
produces
output like this:

root@Devil:~ # ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436
	  txqueuelen:0

This will NOT configure my network card and as it is the fisr copy found =
on
the path the network script uses it.

The second ifconfig is in the sbin directory and is compiled fron =
net-tools,
this produces output like:

root@Devil:~ # /sbin/ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:688 (688.0 b)  TX bytes:688 (688.0
b)

This works (and give statistics, nice).
I can now configure my network card with:
ifconfig eth0 192.168.2.1 netmask 255.255.255.0 and the routing tables =
looks
like this:
root@Devil:~ # ip r l
192.168.2.0/24 dev eth0  proto kernel  scope link  src
192.168.2.1

The 8139too module is autoloaded during the boot process.

The setup tool adds a trailing dot (.) on the module name in the config
file.

root@Devil:~ # cat /etc/sysconfig/nic/ifcfg-eth0 DEVICE=3Deth0 =
ONBOOT=3Dyes
MODULE=3D"8139too."
DHCP=3Dno
IP=3D"192.168.2.1"
NETMASK=3D"255.255.255.0"
BROADCAST=3D"192.168.2.255"

This is not critical as the module is already loaded (discovered at =
boot),
so "/etc/init.d/network restart"
will get the card up and working.

Two suggestions for fixing the two copies of ifconfig:
1) edit /etc/init.d/network and change all instances of ifconfig to
/sbin/ifconfig
2) patch /build/scripts/inetutils to disable compiling ifconfig with
"--disable-ifconfig"

Both work, I prefer the second option attached is the patch I used.

There are other duplicate files:

groups, hostname and mktmp can be found in both /bin and /usr/bin both =
sets
work but are different binaries.

ntlm_auth can be found in both /usr/bin and /usr/sbin, again both =
execute
but are different binaries.

rpc.rquoted can be found in /sbin and /usr/bin, both execute and are
different binaries.

My consern is that like my issue with picking up a ifconfig that did not
work for me, the same could be said of these files.  The PATH is
/bin:/usr/bin:/sbin:/usr/sbin.

Also every time I restart networking I get :

/etc/wlan/shared: line 77: :[ too many arguments.

any ideas?

Thanks again,

Roy.



      ___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try =
it
now.
http://uk.answers.yahoo.com/=20

_________________________________________________________________________=
___

baulogis GmbH
Zamdorfer Str. 100
81677 M=FCnchen / Munich
Deutschland / Germany
www.baulogis.com

Gesch=E4ftsf=FChrer / Managing Director: Thomas Bachmaier HRB 133832,
Amtsgericht M=FCnchen
Ust-ID: DE 212 020 193


Der Inhalt dieser E-Mail ist vertraulich und ausschlie=DFlich f=FCr den
bezeichneten Adressaten (dev...@li...)
bestimmt.
Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen =
Vertreter
sein sollten, so beachten Sie bitte, dass jede Form der Kenntnisnahme,
Ver=F6ffentlichung, Vervielf=E4ltigung oder Wiedergabe des Inhalts =
dieser E-Mail
unzul=E4ssig ist.
Bitte setzen Sie sich in diesem Fall mit dem Absender der E-Mail in
Verbindung (br...@ba...).


-------------------------------------------------------------------------=

This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Devil-linux-develop mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devil-linux-develop

Hi there,
I've also managed to build 1.3.4 today and am now taking a deeper look =
at it.

First: ncurses hat to be disabled and syslinux had to be downgraded at =
my build-system aswell.

now to the problem with the dot "." after the module-names:
looking at the "setup"-script shows the problem
on line 470 the driver-modules are enumerated but the script uses the =
2.4-extension ".o"
this has to be replaced with the 2.6-fashion ".ko"

Also there are some other "problems" with the make build itself.
There are still some "unanswered" questions regarding the =
kernel-settings (IO-Scheduler and so on...)

so running the build with CONFIG_DISABLELOGGING=3Dy in .config will show =
what to add/change.

I will keep you updated as my evaluation goes on.

My purpose is to setup a loadbalancing cluster of reverse-proxy-apaches =
using shorewall, heartbeat and httpd.

Cheers,
Bj=F6rn



-----Urspr=FCngliche Nachricht-----
Von: dev...@li... =
[mailto:dev...@li...] Im Auftrag =
von roy barnard
Gesendet: Mittwoch, 18. Juli 2007 01:19
An: dev...@li...
Betreff: Re: [Devil-linux-develop] devil linux 1.3.4 (2007-07-11) build =
andnetwork problems

Hi again,

Many thanks for the help so far.

The patch file asm_types.h.patch allowed me to compile quagga. :-)

The patch file for mount_cdrom works great! :-)

You are right to say network is working. my problem is is that there are =
two copies of ifconfig.

The first one found of the path is built from inetutils and this =
produces output like this:

root@Devil:~ # ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436
	  txqueuelen:0

This will NOT configure my network card and as it is the fisr copy found =
on the path the network script uses it.

The second ifconfig is in the sbin directory and is compiled fron =
net-tools, this produces output like:

root@Devil:~ # /sbin/ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:688 (688.0 b)  TX bytes:688 (688.0
b)

This works (and give statistics, nice).
I can now configure my network card with:
ifconfig eth0 192.168.2.1 netmask 255.255.255.0 and the routing tables =
looks like this:
root@Devil:~ # ip r l
192.168.2.0/24 dev eth0  proto kernel  scope link  src
192.168.2.1

The 8139too module is autoloaded during the boot process.

The setup tool adds a trailing dot (.) on the module name in the config =
file.

root@Devil:~ # cat /etc/sysconfig/nic/ifcfg-eth0 DEVICE=3Deth0 =
ONBOOT=3Dyes MODULE=3D"8139too."
DHCP=3Dno
IP=3D"192.168.2.1"
NETMASK=3D"255.255.255.0"
BROADCAST=3D"192.168.2.255"

This is not critical as the module is already loaded (discovered at =
boot), so "/etc/init.d/network restart"
will get the card up and working.

Two suggestions for fixing the two copies of ifconfig:
1) edit /etc/init.d/network and change all instances of ifconfig to =
/sbin/ifconfig
2) patch /build/scripts/inetutils to disable compiling ifconfig with =
"--disable-ifconfig"

Both work, I prefer the second option attached is the patch I used.

There are other duplicate files:

groups, hostname and mktmp can be found in both /bin and /usr/bin both =
sets work but are different binaries.

ntlm_auth can be found in both /usr/bin and /usr/sbin, again both =
execute but are different binaries.

rpc.rquoted can be found in /sbin and /usr/bin, both execute and are =
different binaries.

My consern is that like my issue with picking up a ifconfig that did not =
work for me, the same could be said of these files.  The PATH is =
/bin:/usr/bin:/sbin:/usr/sbin.

Also every time I restart networking I get :

/etc/wlan/shared: line 77: :[ too many arguments.

any ideas?

Thanks again,

Roy.



      ___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try =
it now.
http://uk.answers.yahoo.com/=20

_________________________________________________________________________=
___

baulogis GmbH
Zamdorfer Str. 100
81677 M=FCnchen / Munich
Deutschland / Germany
www.baulogis.com

Gesch=E4ftsf=FChrer / Managing Director: Thomas Bachmaier
HRB 133832, Amtsgericht M=FCnchen
Ust-ID: DE 212 020 193


Der Inhalt dieser E-Mail ist vertraulich und ausschlie=DFlich f=FCr den =
bezeichneten Adressaten (dev...@li...) =
bestimmt.
Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen =
Vertreter sein sollten,
so beachten Sie bitte, dass jede Form der Kenntnisnahme, =
Ver=F6ffentlichung,=20
Vervielf=E4ltigung oder Wiedergabe des Inhalts dieser E-Mail =
unzul=E4ssig ist.
Bitte setzen Sie sich in diesem Fall mit dem Absender der E-Mail in =
Verbindung (br...@ba...).

I've tried with both version. First I've tried with 1.2 and the error was in
make build at glibc...
With the version 1.3 the error was in make build at gcc

Heiko Zuerker wrote:
> 
> 
> On Wed, July 18, 2007 06:58, davide mion wrote:
>>
> 
>> I'm trying to customize Devil-Linux. I've followed the Documentation. But
>>  when I execute make build there's an error in glibc or gcc. error:37 in
>> function sscanf.c. I haven't modified this element, and they are element
>> of the standard release of Devil-Linux. Someone could help me. What I
>> have
>> to do? --
> 
> Which version are you trying to compile 1.2 or 1.3?
> If it's 1.3, please keep in mind that this is the development version.
> 
> -- 
> 
> Regards
>   Heiko Zuerker
>   http://www.devil-linux.org
> 
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Devil-linux-develop mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
> 
> 

-- 
View this message in context: http://www.nabble.com/Problem-building-devil-linux-tf4102817.html#a11669287
Sent from the devil-linux-develop mailing list archive at Nabble.com.

On Wed, July 18, 2007 06:58, davide mion wrote:
>

> I'm trying to customize Devil-Linux. I've followed the Documentation. But
>  when I execute make build there's an error in glibc or gcc. error:37 in
> function sscanf.c. I haven't modified this element, and they are element
> of the standard release of Devil-Linux. Someone could help me. What I have
> to do? --

Which version are you trying to compile 1.2 or 1.3?
If it's 1.3, please keep in mind that this is the development version.

-- 

Regards
  Heiko Zuerker
  http://www.devil-linux.org

thanks.. I've understood this..
I've another question:

I have to create only the script in folder /build/scripts or I've to add
another script in the folder /build/scripts/scripts and
/build/scripts/configuration ?


Serge Leschinsky wrote:
> 
> Davide! wrote:
> 
>> *I wish adding the programs sendmail and amavis at Devil-Linux and
>> remove dspam and postfix. I've read the documentation, install the build
>> development, but I don't have understand how can add the programs. I've
>> the source of sendmail and amavis. I ask you if someone can explain
>> exactly the procedure to add the programs. Thanks*
> 
> Have you read the project doc?
> 4.3. Adding Programs
> http://www.devil-linux.org/documentation/1.3.x/ch03s04.html#d0e1879
> 
> In short, you should create a script ( choose something as a prototype
> from
> scripts/* ), put it to script/ and then put the appropriate source to src/
> dir.
> "make prepare" is required to recalculate dependencies.
> 
> --
>  Serge Leschinsky
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Devil-linux-develop mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devil-linux-develop
> 
> 

-- 
View this message in context: http://www.nabble.com/Adding-Programs-tf4061444.html#a11667326
Sent from the devil-linux-develop mailing list archive at Nabble.com.

I'm trying to customize Devil-Linux. I've followed the Documentation. But
when I execute make build there's an error in glibc or gcc. error:37 in
function sscanf.c. I haven't modified this element, and they are element of
the standard release of Devil-Linux. 
Someone could help me. What I have to do?
-- 
View this message in context: http://www.nabble.com/Problem-building-devil-linux-tf4102817.html#a11667299
Sent from the devil-linux-develop mailing list archive at Nabble.com.

Hi again,

Many thanks for the help so far.

The patch file asm_types.h.patch allowed me to 
compile quagga. :-)

The patch file for mount_cdrom works great! :-)

You are right to say network is working. my problem is
is that there are two copies of ifconfig.

The first one found of the path is built from
inetutils and this produces output like this:

root@Devil:~ # ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436
	  txqueuelen:0

This will NOT configure my network card and as it is
the fisr copy found on the path the network script
uses it.

The second ifconfig is in the sbin directory and is
compiled fron net-tools, this produces output like:

root@Devil:~ # /sbin/ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0
frame:0
          TX packets:8 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:0
          RX bytes:688 (688.0 b)  TX bytes:688 (688.0
b)

This works (and give statistics, nice).
I can now configure my network card with:
ifconfig eth0 192.168.2.1 netmask 255.255.255.0
and the routing tables looks like this:
root@Devil:~ # ip r l
192.168.2.0/24 dev eth0  proto kernel  scope link  src
192.168.2.1

The 8139too module is autoloaded during the boot
process.

The setup tool adds a trailing dot (.) on the module
name in the config file.

root@Devil:~ # cat /etc/sysconfig/nic/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
MODULE="8139too."
DHCP=no
IP="192.168.2.1"
NETMASK="255.255.255.0"
BROADCAST="192.168.2.255"

This is not critical as the module is already loaded
(discovered at boot), so "/etc/init.d/network restart"
will get the card up and working.

Two suggestions for fixing the two copies of ifconfig:
1) edit /etc/init.d/network and change all instances
of ifconfig to /sbin/ifconfig
2) patch /build/scripts/inetutils to disable compiling
ifconfig with "--disable-ifconfig"

Both work, I prefer the second option attached is the
patch I used.

There are other duplicate files:

groups, hostname and mktmp can be found in both /bin
and /usr/bin both sets work but are different
binaries.

ntlm_auth can be found in both /usr/bin and /usr/sbin,
again both execute but are different binaries.

rpc.rquoted can be found in /sbin and /usr/bin, both
execute and are different binaries.

My consern is that like my issue with picking up a
ifconfig that did not work for me, the same could be
said of these files.  The PATH is
/bin:/usr/bin:/sbin:/usr/sbin.

Also every time I restart networking I get :

/etc/wlan/shared: line 77: :[ too many arguments.

any ideas?

Thanks again,

Roy.



      ___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/ 

On Tue, July 17, 2007 17:19, Jan Hugo Prins wrote:
>> Try to configure your NICs using "setup" command.
>>
>>
>>
> I have tried creating the config with the setup command but this did not
> work for me. As I said before, I think the initscripts should be upgraded
> to use iproute2 instead of the ancient ifconfig commands. I created all
> network configs using fwbuilder and the fwbuilder script uses iproute2 to
> setup the interfaces.

We would gladly accept any volunteers who want to take on this task. :-)


-- 

Regards
  Heiko Zuerker
  http://www.devil-linux.org

Serge Leschinsky wrote:
> Hi,
>
> roy barnard wrote:
>
>   
>> At the start of this week, I downloaded everything to
>> build Devil-Linux 1.3.4 (2007-07-11).
>>     
I have a router running with this one for a few days now.
Works ok for me.

root@Devil:~ # uptime
00:16:47 up 5 days, 21:50,  1 user,  load average: 0.01, 0.02, 0.00

At the moment a total of 7 interfaces in the box, only 3 life though at 
the moment.

> ...
>   
>> The first problems I encountered were these three
>> packages refused to compile: ncftp,syslinux and
>> quagga. (Fragments of logs at end of message)
>>     
>
> quagga - see asm_types.h.patch into src dir.
>
> # http://bugzilla.kernel.org/show_bug.cgi?id=7724
> pushd /usr > /dev/null && patch -p1 < $DL_DIR/src/asm_types.h.patch && popd >
> /dev/null
>
>
> syslinux:
>
> It's a problem for me too - I can't compile syslinux v.3.51, only 3.36. Use the
> version 3.36.
>
>
>   
Here syslinux compiles if I disable the hardened compile options of gcc.
> Try to configure your NICs using "setup" command.
>
>   
I have tried creating the config with the setup command but this did not 
work for me.
As I said before, I think the initscripts should be upgraded to use 
iproute2 instead of the ancient ifconfig commands.
I created all network configs using fwbuilder and the fwbuilder script 
uses iproute2 to setup the interfaces.

Jan Hugo

Davide! wrote:

> *I wish adding the programs sendmail and amavis at Devil-Linux and
> remove dspam and postfix. I've read the documentation, install the build
> development, but I don't have understand how can add the programs. I've
> the source of sendmail and amavis. I ask you if someone can explain
> exactly the procedure to add the programs. Thanks*

Have you read the project doc?
4.3. Adding Programs
http://www.devil-linux.org/documentation/1.3.x/ch03s04.html#d0e1879

In short, you should create a script ( choose something as a prototype from
scripts/* ), put it to script/ and then put the appropriate source to src/ dir.
"make prepare" is required to recalculate dependencies.

--
 Serge Leschinsky

Hi,

roy barnard wrote:

> At the start of this week, I downloaded everything to
> build Devil-Linux 1.3.4 (2007-07-11).
...
> The first problems I encountered were these three
> packages refused to compile: ncftp,syslinux and
> quagga. (Fragments of logs at end of message)

quagga - see asm_types.h.patch into src dir.

# http://bugzilla.kernel.org/show_bug.cgi?id=7724
pushd /usr > /dev/null && patch -p1 < $DL_DIR/src/asm_types.h.patch && popd >
/dev/null


syslinux:

It's a problem for me too - I can't compile syslinux v.3.51, only 3.36. Use the
version 3.36.

ncftp:
 I'll check.

> The build works Ok, but I had to copy
> /build/tmp/syslinux-3.51/ppmtolss16 to /sbin to get
> 'make iso' to work as syslinux had not compiled and
> installed.
> 
> The Light box failed to boot this code, whimpering
> about unabe to /dev/loop.
> So, I modified mount_cdrom
...
> I think that the mount command can mount loop devices
> :-(
>

Hm... Quick fix is in the attachment. Use it please until we submit the patch to
cvs.


> The next issue for me is networking.
> The Light cv700a uses 3 RealTek ethernet cards
> (8139too)
> 
> Which fail to work under devil linux.

I assure you that it's working.

root@vpnc:~ # lsmod | grep 8139
8139too                27136  0
8139cp                 24448  0
mii                     6016  2 8139too,8139cp
root@vpnc:~ # ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:0D:61:9E:23:A8
          inet addr:10.5.192.41  Bcast:10.5.223.255  Mask:255.255.224.0
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500
          txqueuelen:1000

root@vpnc:~ # ip r l
10.5.192.0/19 dev eth0  scope link
default via 10.5.192.1 dev eth0

root@vpnc:~ # cat  /etc/sysconfig/nic/ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
MODULE="8139too."
DHCP=yes
IP=
NETMASK=
BROADCAST=""


Try to configure your NICs using "setup" command.


-- 
 Sincerely
  Serge Leschinsky

Hi,

I hope this is the right place to send this.

At the start of this week, I downloaded everything to
build Devil-Linux 1.3.4 (2007-07-11).

I unchecked "Run build with nice" in make
menuconfig,Build Configuration.

The first problems I encountered were these three
packages refused to compile: ncftp,syslinux and
quagga. (Fragments of logs at end of message)

So, I edited .config to set CONFIG_NCFTP and
CONFIG_QUAGGA to n.

As I could not find a CONFIG_SYSLINUX I created
/build/tmp/.done_build_syslinux.

I can live without ncftp,syslinux and quagga for now.
I have a MiniItx box a Light cv700a so can boot of
Flash using Grub.

The build works Ok, but I had to copy
/build/tmp/syslinux-3.51/ppmtolss16 to /sbin to get
'make iso' to work as syslinux had not compiled and
installed.

The Light box failed to boot this code, whimpering
about unabe to /dev/loop.
So, I modified mount_cdrom

changing lines like: 
	mount -o loop=/dev/loop0 -t iso9660
/cd/bootcd.iso.old $1 || return 1
to 
	losetup /dev/loop0 /cd/bootcd.iso.old
	mount -t iso9660 /dev/loop0 $1 || return 1
and prior to each umount adding:
	losetup -d /dev/loop0

I think that the mount command can mount loop devices
:-(

The next issue for me is networking.
The Light cv700a uses 3 RealTek ethernet cards
(8139too)

Which fail to work under devil linux.
I have had the network cards, on this box, work under
centos 4.3.

More puzzling is the lack of networking:

root@Devil:~ # ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436
	  txqueuelen:0

root@Devil:~ # ifconfig eth0
eth0	Link encap:Ethernet  HWaddr xx:xx:xx:xx:xx:xx
(real mac shown)
	BROADCAST MULTICAST  MTU:1500
        txqueuelen:1000
	
root@Devil:~ # ifconfig eth0 192.168.2.1 netmask
255.255.255.0
root@Devil:~ # ifconfig eth0
eth0	Link encap:Ethernet  HWaddr xx:xx:xx:xx:xx:xx
(real mac shown)
        inet addr: 192.168.2.1  Bcast:192.168.2.255 
Mask:255.255.255.0
	BROADCAST MULTICAST  MTU:1500
        txqueuelen:1000

root@Devil:~ # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags
Metric Ref    Use Iface

root@Devil:~ # route add -net 192.168.2.0/24 dev eth0
SIOCADDRT: Network is down.

I can ping 127.0.0.1 and 192.168.2.1 on the box
locally but can not get any traffic out of the phsical
interface.
I have redhat linux box connected to the Devil Linux
Light CV700a with a cross over cable.
The packet light flashes on the Devil Linux but no
traffic enters the OS.
The redhat box can't see any arp address for the Light
box.

Please help..
I am willing and able to undertake any build testing
that may help

Many Thanks

Roy.
 

Fragments of logs 
-----------------

/build/tmp/LOGS/build/ncftp
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Compiling DStrCat.c.
  gcc -D_REENTRANT -D_LARGEFILE64_SOURCE -O2 -W -Wall
-Wno-format-y2k -DLINUX=2
  6021 -DLINUX_GLIBC= -DHAVE_CONFIG_H -DLINUX=26021
-DLINUX_GLIBC= -I/build/tmp
  /ncftp-3.2.0 -I/build/tmp/ncftp-3.2.0/libncftp
-I/build/tmp/ncftp-3.2.0/sio -
  I/build/tmp/ncftp-3.2.0/Strn DStrCat.c -c
  In file included from DStrCat.c:1:
  syshdrs.h:57: error: expected identifier or '('
before '__extension__'

/build/tmp/LOGS/build/quagga
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
make[4]: Entering directory
`/build/tmp/quagga-0.99.7/lib'
 gcc -DHAVE_CONFIG_H -DSYSCONFDIR=\"/etc/zebra/\" -I.
-I. -I.. -I.. -I.. -I../lib -I/usr/include/net-snmp
-I/usr/include/net-snmp/library -Os
-fno-omit-frame-pointer -g -std=c99 -Wall
-Wsign-compare -Wpointer-arith -Wbad-function-cast
-Wwrite-strings -Wmissing-prototypes
-Wmissing-declarations -Wchar-subscripts -Wcast-qual
-MT network.lo -MD -MP -MF .deps/network.Tpo -c
network.c  -fPIC -DPIC -o .libs/network.o
In file included from
/usr/include/linux/rtnetlink.h:5,
                 from ./zebra.h:165,
                 from network.c:23:
/usr/include/linux/if_link.h:43: error: expected
specifier-qualifier-list before '__u64'
In file included from
/usr/include/linux/rtnetlink.h:7,
                 from ./zebra.h:165,
                 from network.c:23:
/usr/include/linux/neighbour.h:92: error: expected
specifier-qualifier-list before '__u64'

/build/tmp/LOGS/build/syslinux
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gcc -nopie -fno-stack-protector -m32
-fno-stack-protector -mregparm=3 -DREGPARM=3 -W -Wall
-march=i386 -Os -fomit-frame-pointer
-I../libutil/include -I../include  -D__COM32__ -c -o
mboot.o mboot.c
mboot.c: In function 'trampoline_start':
mboot.c:870: error: can't find a register in class
'BREG' while reloading 'asm'

===============================



		
___________________________________________________________ 
Inbox full of unwanted email? Get leading protection and 1GB storage with All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html

Hi..
I wish adding the programs sendmail and amavis at Devil-Linux and remove =
dspam and postfix. I've read the documentation, install the build =
development, but I don't have understand how can add the programs. I've =
the source of sendmail and amavis. I ask you if someone can explain =
exactly the procedure to add the programs. Thanks

On Fri, July 6, 2007 04:27, Serge Leschinsky wrote:
> Hi,
>
>
> I'm really sorry for troubling people, who is testing 1.3. I've updated
> kernel to 2.6.21.5 but I still can't adjust the kernel config file and
> "make prepare"
> freezes on "make oldconfig" phase .
>
> As a workaround (I use it myself) I suggest to _temporary_ add the
> following to the scripts/prepare:
>
> -       make oldconfig || exit 1
> +       ( yes | sed 's/y//' | make oldconfig ) || exit 1
>
>
> it allows to set default values for all unknown kernel options.
>
> Heiko, could you please point me the right direction? I copied full
> .config to
> cripts/config/linux-2.6/linux_config but the next time the system asks me
> again... Have I missed something critical?

In some kernel releases that happens, don't know why.

One thing which may cause you trouble:
the .config for the kernel is build out of several files from the
scripts/config/linux-2.6/ directory, maybe one of the CPU related ones
causes you trouble. There are also some scripts which modify the .config,
check the scripts/prepare file.

-- 

Regards
  Heiko Zuerker
  http://www.devil-linux.org